Adam Baumberger
Sheridan,WY
Summary
Resourceful professional bringing excellent communication and teamwork illustrated several years of industry experience. Ambitious and eager to learn with superior work ethic.
Overview
6
6
years of professional experience
Work History
Apprentice Electrician
Apex Mechanical
Buffalo, WY
09.2022 - Current
- Ensured compliance with relevant codes related to the National Electrical Code.
- Performed general maintenance on electrical systems including replacing worn parts and repairing faulty wiring.
- Adhered to company policies regarding the use of personal protective equipment.
- Observed safety regulations while working on energized systems.
- Followed all safety procedures when handling hazardous materials such as high voltage electricity.
- Tested continuity of circuits in electrical wiring using testing devices such as ohmmeters, voltmeters and oscilloscopes.
- Worked with relay logic circuits.
- Assembled conduits by threading ends together with couplings or clamps.
- Conducted routine maintenance checks on existing electrical systems.
- Maintained records of installation activities by completing forms and reports as required.
- Used specialized diagnostic tools to locate faults in complex electrical systems.
- Inspected electrical systems, equipment and components to identify hazards, defects, and the need for adjustment or repair.
- Replaced defective circuit breakers or fuses when necessary.
- Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
- Installed lighting fixtures such as fluorescent bulbs or LED lights.
- Read blueprints or technical diagrams to determine the layout of a system.
- Measured, cut and bent wire and conduit using hand tools and power tools.
- Assisted in troubleshooting problems with various types of control systems.
- Calculated load capacities of circuits to ensure conformance to code requirements.
- Identified potential problems before they occur by inspecting equipment regularly.
- Built controllers and panels to complete system installations.
- Set up equipment and configured settings for optimal performance.
- Maintained organization, cleanliness and safety in work areas.
- Transported required supplies and employees from headquarters to job site using company vehicles.
- Assisted with electrical installation tasks, added new wiring and adjusted breaker boxes.
- Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
- Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Kept work areas clean, neat and organized for efficient operations.
- Verified measurements and made accurate cuts to avoid wasting materials on job sites.
- Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
- Listened to directives of senior electrical professionals to complete efficient tasks.
- Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.
- Dug trenches and created holes to pull conduit and install supports.
- Inspected existing wiring to identify short circuits.
- Resolved issues with existing systems and replaced malfunctioning parts.
- Gathered required tools and equipment for each task to increase efficiency.
- Measured and prepared supplies for electrical tasks.
- Worked in team-based environment to accomplish projects.
- Demonstrated strong foundation of safety knowledge and implemented industry best practices.
- Followed relevant electrical and building codes for each job.
- Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
- Connected wires to circuit breakers, transformers, or other components.
- Installed new electrical components, fixtures and motors.
- Developed comprehensive knowledge of electrical codes, principles and federal regulations.
- Worked in all weather conditions and on multiple types of ladders and mechanical lifts.
- Supported journeyman and master electricians in maintaining, operating and repairing electrical systems.
- Assisted electricians in wiring residential buildings with installation of electrical conduits.
- Inspected electrical components to identify hazards, defects, or potential repairs in compliance with codes.
Low Voltage Technician
Comtronix
Sheridan, WY
01.2022 - 09.2022
- Provided technical support to customers regarding their low voltage systems.
- Assisted in training junior technicians on proper methods for installing low voltage equipment.
- Collaborated with other tradespeople on multi-disciplinary projects involving low voltage systems.
- Configured network switches, routers and wireless access points.
- Installed conduit piping, junction boxes and other related components for data cabling installations.
- Completed daily reports on tasks performed during service visits.
- Monitored performance of installed systems in order to ensure optimal operation.
- Maintained accurate records of all maintenance activities performed at each job site.
- Programmed access control systems using manufacturer software applications.
- Installed, tested and maintained low voltage systems such as fire alarms, CCTV, access control and audio and visual equipment.
- Conducted site surveys to determine customer requirements.
- Calibrated instruments used in testing low voltage systems.
- Performed termination of cables including Cat5E, Cat6 and coaxial cables for various systems.
- Adhered strictly to safety regulations when working around hazardous materials.
- Troubleshot electrical circuits in order to identify the root cause of system malfunctions.
- Updated firmware on various devices such as DVRs and IP cameras.
- Inspected equipment for signs of wear or damage before performing maintenance services.
- Resolved complex technical issues with minimal supervision from senior technicians.
- Repaired damaged wires or cable assemblies within a variety of electrical enclosures.
- Created wiring diagrams for new installations or modifications to existing systems.
- Developed test plans and documented results prior to system installation or repair work.
- Kept detailed inventory records of parts and materials and took note of potential shortages or problems.
- Maintained detailed logs of installation, repair and updating services.
- Set up and performed routine maintenance on fire alarm, security and closed circuit TV systems for various clients.
- Conducted diagnostic tests to assess wire, part and system malfunctions.
- Scheduled routine system inspections and preventive maintenance.
- Assessed project blueprints and drawings to assess project scope and required materials.
- Utilized effective troubleshooting methods, removed malfunctioning components and identified wiring issues to restore systems to working order.
Apprentice Electrician
Power Solutions
Gillette, WY
08.2020 - 11.2021
- Ensured compliance with relevant codes related to the National Electrical Code.
- Performed general maintenance on electrical systems including replacing worn parts and repairing faulty wiring.
- Adhered to company policies regarding the use of personal protective equipment.
- Followed all safety procedures when handling hazardous materials such as high voltage electricity.
- Observed safety regulations while working on energized systems.
- Tested continuity of circuits in electrical wiring using testing devices such as ohmmeters, voltmeters and oscilloscopes.
- Worked with relay logic circuits.
- Assembled conduits by threading ends together with couplings or clamps.
- Conducted routine maintenance checks on existing electrical systems.
- Maintained records of installation activities by completing forms and reports as required.
- Used specialized diagnostic tools to locate faults in complex electrical systems.
- Inspected electrical systems, equipment and components to identify hazards, defects, and the need for adjustment or repair.
- Repaired electric motors, pumps, fans.
- Replaced defective circuit breakers or fuses when necessary.
- Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
- Installed lighting fixtures such as fluorescent bulbs or LED lights.
- Read blueprints or technical diagrams to determine the layout of a system.
- Assisted in troubleshooting problems with various types of control systems.
- Measured, cut and bent wire and conduit using hand tools and power tools.
Apprentice Electrician
Tucker Electric
Gillette, WY
07.2018 - 06.2020
- Ensured compliance with relevant codes related to the National Electrical Code.
- Performed general maintenance on electrical systems including replacing worn parts and repairing faulty wiring.
- Adhered to company policies regarding the use of personal protective equipment.
- Observed safety regulations while working on energized systems.
- Followed all safety procedures when handling hazardous materials such as high voltage electricity.
- Tested continuity of circuits in electrical wiring using testing devices such as ohmmeters, voltmeters and oscilloscopes.
- Worked with relay logic circuits.
- Assembled conduits by threading ends together with couplings or clamps.
- Conducted routine maintenance checks on existing electrical systems.
- Maintained records of installation activities by completing forms and reports as required.
- Used specialized diagnostic tools to locate faults in complex electrical systems.
- Inspected electrical systems, equipment and components to identify hazards, defects, and the need for adjustment or repair.
- Repaired electric motors, pumps, fans.
- Replaced defective circuit breakers or fuses when necessary.
- Installed electrical wiring and fixtures, such as outlets, switches, circuit breakers, junction boxes and wall sockets.
- Installed lighting fixtures such as fluorescent bulbs or LED lights.
- Read blueprints or technical diagrams to determine the layout of a system.
- Measured, cut and bent wire and conduit using hand tools and power tools.
- Assisted in troubleshooting problems with various types of control systems.
- Calculated load capacities of circuits to ensure conformance to code requirements.
- Identified potential problems before they occur by inspecting equipment regularly.
- Built controllers and panels to complete system installations.
Education
Certificate - Electrician
Central Wyoming College
Riverton, WY05-2024
Skills
- Commercial Wiring
- Transformer Connections
- Wiring techniques
- Industrial Wiring
- National Electrical Code
- Circuit Analysis
- Voltage Testing
- Conduit Bending
- Standard power tool knowledge
- Electrical Installations
- State and local codes
- Electrical system modification
- Local and state regulations
- Electrical diagnostics
- Electrical repair
- Wiring Installations
- Electrical maintenance and repair
- Wiring Layouts
- Troubleshooting
- Fixtures
- Wiring Termination Requirements
- Wiring for commercial and residential projects
- Project Management
- Diagnostics and troubleshooting
Journeyman's License Info
- Currently waiting for the new period to open to submit final transcript and hours to the state to take my journeyman's test. All hours and courseworks are completed for a journeyman's license.
Timeline
Apprentice Electrician
Apex Mechanical
09.2022 - Current
Low Voltage Technician
Comtronix
01.2022 - 09.2022
Apprentice Electrician
Power Solutions
08.2020 - 11.2021
Apprentice Electrician
Tucker Electric
07.2018 - 06.2020
Certificate - Electrician
Central Wyoming College
Similar Profiles
Guillermo RuizGuillermo Ruiz
Pipefitter at Countywide Mechanical SystemsPipefitter at Countywide Mechanical Systems
Rodolfo BatesRodolfo Bates
Plumber at Pacific Rim MechanicalPlumber at Pacific Rim Mechanical
Mathew McGinnisMathew McGinnis
Superintendent at TP MechanicalSuperintendent at TP Mechanical