Overview
Work History
Timeline
Generic

Adam Reyes

Berwyn,IL

Overview

16
16
years of professional experience

Work History

Painter/prep

Meyers Autobody
Chi, IL
03.2022 - 01.2024
  • Tar removers were used on cars that had been driven through construction zones.
  • Cleaned and polished vehicles using wax, polishes, detergents, brushes, cloths, and buffing machines.
  • Inspected vehicles for scratches or dents prior to detailing.
  • Replaced burnt out light bulbs as needed on headlights or taillights.
  • Responded promptly to customer inquiries regarding services provided.
  • Trained new employees on proper techniques for detailing vehicles correctly.
  • Applied paint sealants to protect the finish of cars from environmental damage.
  • Inspect vehicle bodies for rust damage before beginning repairs.
  • Follow instructions provided by supervisors regarding specific job requirements.
  • Sand body panels to remove imperfections prior to painting.
  • Maintain a clean workspace at all times while adhering to safety regulations.
  • Polish finished vehicles using buffers and other tools.
  • Assist in the application of primers, sealers, base coats, and clear coats.
  • Ensure proper disposal of hazardous materials used during the painting process.
  • Operate air guns, spray guns, pressure tanks, compressors, and other equipment needed for auto body repair work.
  • Apply decorative finishes such as pinstripes and custom designs on vehicles' exteriors.
  • Transfer completed jobs from the production area into storage spaces.
  • Clean up spilled paints and solvents according to safety protocols.
  • Mix and match paint colors to achieve desired shades.
  • Disassemble parts of vehicles requiring extensive painting work.
  • Prepare surfaces for painting by washing, sanding, and grinding.
  • Sanded and sealed completed finishes according to precise specifications.
  • Matched paints to vehicle color specifications or original manufacturer colors.
  • Check finished products against quality control standards established by employers.
  • Provide assistance in mixing paints according to manufacturer specifications.
  • Communicate effectively with customers when providing updates on project status.
  • Perform minor repairs such as filling dents or holes with putty or fiberglass.
  • Prepared surfaces by removing imperfections, applying rust-resistant undercoats and sealing seams.
  • Applied color coats using sprayers and brushes.
  • Readied vehicles for painting by removing accessories and masking surfaces with tape or paper to protect from paint.
  • Primed vehicle repairs to improve adhesions of new paint coats.
  • Kept machinery in good working order by completing thorough disassembly, cleaning and reassembly of sprayers and other power equipment.
  • Matched required colors with available ones and verified timely procurement.
  • Handled and disposed of hazardous waste carefully to minimize harm to personnel or environmental habitats.
  • Made tools such as sprayers, buffers and brushes available prior to start of each paint job.
  • Received new inventory orders and verified completeness and accuracy.
  • Covered bumpers, windows and trim with masking tape to prevent overspray or damage to adjacent areas.
  • Used buffing tools to repair dents on vehicle doors and panels.
  • Removed dents with hammers, suction and skilled use of dolly blocks.
  • Monitored parts and materials storage area and maintained stock replenishment and organization.
  • Inspected automotive repairs to match paint and maintain body appearance.
  • Polished finished product to remove imperfections and prepare for delivery.
  • Mixed paint in accordance with manufacturer's specifications to ensure proper color match.
  • Provided guidance and training support to new team members joining the auto body painting department.
  • Cleaned up work area after completion of each job to maintain a safe working environment.
  • Performed minor repairs on body panels as needed prior to painting process.
  • Removed rust from metal components before applying primer or paint.
  • Applied primers, sealers, base coats and clear coats to vehicle surfaces using spray guns.
  • Repaired dents, scratches and other blemishes in preparation for painting process.
  • Communicated with supervisors regarding job progress updates or any issues encountered while performing tasks.
  • Used sandpaper and other abrasive materials to smooth out surface imperfections prior to painting process.
  • Sanded, prepared and prepped vehicles for painting process.
  • Inspected completed work for quality assurance.
  • Masked off areas of vehicles that were not intended to be painted.
  • Ensured all safety guidelines were followed when operating power tools and equipment.
  • Checked air pressure levels on spray guns throughout the day for consistent performance.
  • Ensured that all tools were properly stored after use in order to maintain a safe working environment.
  • Organized inventory of paints, primers, coatings, solvents and other supplies used in the auto body painting process.
  • Assisted in mixing colors according to customer specifications and preferences.
  • Maintained painting and coating, ventilation, compressed air and personal protective equipment.

Auto Painter

Chicago Collision
Chicago, IL
06.2008 - 10.2022
  • Prepared surfaces for painting by removing rust, dirt and grease using wire brush and chemical solutions.
  • Calibrated spray guns in order to achieve optimal results when mixing colors.
  • Polished painted surfaces to obtain a smooth finish.
  • Assisted other technicians in performing tasks such as sanding and polishing as needed.
  • Mixed paint according to manufacturer's specifications and mixed catalysts with paint in order to achieve desired texture.
  • Mixed paint according to manufacturer's specifications.
  • Operated air compressor equipment to power tools such as grinders, drills and paint spray guns.
  • Monitored job progress by inspecting each stage of the painting process.
  • Removed old finishes from vehicles using sanders, scrapers, heat guns and chemicals.
  • Kept accurate records of materials used during each job.
  • Applied protective coatings onto vehicles in order to protect them from corrosion.
  • Masked areas of vehicle not intended for painting with tape and paper coverings.
  • Set up booths with proper ventilation systems for spraying operations.
  • Applied primer coats, base coats and clear coats on vehicles using spray guns.
  • Checked finished work against original specifications to ensure accuracy.
  • Cleaned up after each job by disposing of all used materials properly.
  • Ensured that safety protocols were followed during the entire painting process.
  • Worked with a variety of paints including enamels, lacquers and urethanes.
  • Selected appropriate paints for specific jobs according to customer requests or industry standards.
  • Adjusted nozzles on spray guns in order to maintain even flow of paint while spraying.
  • Repaired minor dents, scratches or other imperfections prior to painting process.
  • Prepared surfaces by removing imperfections, applying rust-resistant undercoats and sealing seams.
  • Matched paints to vehicle color specifications or original manufacturer colors.
  • Sanded and sealed completed finishes according to precise specifications.
  • Primed vehicle repairs to improve adhesions of new paint coats.
  • Kept machinery in good working order by completing thorough disassembly, cleaning and reassembly of sprayers and other power equipment.
  • Made tools such as sprayers, buffers and brushes available prior to start of each paint job.
  • Readied vehicles for painting by removing accessories and masking surfaces with tape or paper to protect from paint.
  • Matched required colors with available ones and verified timely procurement.
  • Handled and disposed of hazardous waste carefully to minimize harm to personnel or environmental habitats.
  • Applied color coats using sprayers and brushes.
  • Maintained painting and coating, ventilation, compressed air and personal protective equipment.
  • Applied primer, paints, varnishes and lacquers to walls and surfaces.
  • Filled hoppers and reservoirs with coating and painting materials according to project specifications.
  • Loaded paint into equipment and adjusted controls to maintain consistent paint flow.
  • Used chemicals and solvents to clean equipment after paint applications.
  • Reported daily job updates to supervisors, including whether workers had completed tasks on time.
  • Delivered work orders and clear instructions to painting team to prepare for each shift.

Timeline

Painter/prep

Meyers Autobody
03.2022 - 01.2024

Auto Painter

Chicago Collision
06.2008 - 10.2022
Adam Reyes