Agapito Martinez
Brownwood,TX
Overview
8
8
years of professional experience
Work History
Cabinetry Helper
Oases cabinetry
Wimberley, Texas
04.2023 - Current
- Performed a variety of tasks such as lifting heavy objects, carrying supplies and cleaning up debris.
- Worked closely with management team to ensure proper execution of daily operations.
- Participated in team meetings to discuss project progress and challenges.
- Followed instructions carefully to support in the completion of projects on time.
- Delivered materials to work sites, minimizing delays in operations.
Oilfield Floorhand
Precision Drilling Company
Houston, Texas
10.2022 - 05.2023
- Collected samples of produced fluids from tank batteries for analysis in laboratory settings if required by customer specification or procedure manual.
- Identified potential hazards, communicated them to supervisors, and took appropriate action to mitigate risks.
- Monitored well control systems during drilling operations for pressure indications or other irregularities that could cause problems with the well bore or production system.
- Operated power tongs to make-up or break-out drill pipe, casing and tubing.
- Used hoists to lift heavy objects onto the rig floor when necessary such as tubulars or pump parts being installed onto pumps and motors .
- Maintained a safe work environment by adhering to safety rules and regulations.
- Repaired minor mechanical issues that arose on various pieces of equipment used around the oilfield such as valves, pumps.
- Inspected blowout preventer systems on a regular basis for wear and tear and reported any issues found to supervisor immediately.
- Performed general housekeeping duties around the rig site including sweeping floors and picking up debris.
- Transported tools, supplies and materials from one location to another using company vehicles or pickup trucks.
- Followed instructions given by driller regarding depth increments when tripping pipe into hole or pulling out of hole.
- Cleaned mud pits, tanks, separators, degassers and other equipment as needed.
- Observed loading activities at tank batteries making sure personnel followed all procedures outlined in company's safety manual pertaining to hazardous material handling.
- Assisted in the rigging up and down of drilling rigs for oil wells.
- Worked closely with service companies coming onsite providing support services like cementing jobs, ensuring their job was done properly without incident.
- Installed safety lines between the rig floor and derrickman while running drill pipe, casing, tubing into the hole during tripping operations.
- Checked all components of BOP stacks before each connection was made up ensuring they were in proper working order with no visible damage present.
- Utilized hand tools such as wrenches, hammers, screwdrivers to perform maintenance tasks on derricks and related equipment.
- Conducted routine inspections of mud pumps and motors for proper operation prior to use.
- Loaded and unloaded materials from trucks using a forklift or crane.
- Palletized boxes to increase movement and shipment efficiency.
- Organized efficient daily work plans based on oral instructions and written directions to meet challenging objectives.
- Tracked parcel movement using hand-held scanners and daily production sheets to keep records accurate.
- Protected company inventory by maintaining and organizing storage areas.
- Operated manual and automated tongs to connect and disconnect drilling pipes and drill bits.
- Participated in rig mobilization and demobilization processes, ensuring safe and efficient operations.
- Managed the handling, sorting, and stacking of drilling pipes and drill strings.
Oilfield Floorhand
Nabors Drilling USA
Midland, Texas
04.2017 - 09.2022
- Collected samples of produced fluids from tank batteries for analysis in laboratory settings if required by customer specification or procedure manual.
- Monitored well control systems during drilling operations for pressure indications or other irregularities that could cause problems with the well bore or production system.
- Operated power tongs to make-up or break-out drill pipe, casing and tubing.
- Repaired minor mechanical issues that arose on various pieces of equipment used around the oilfield such as valves, pumps.
- Maintained a safe work environment by adhering to safety rules and regulations.
- Assisted in the rigging up and down of drilling rigs for oil wells.
- Loaded and unloaded materials from trucks using a forklift or crane.
- Worked closely with service companies coming onsite providing support services like cementing jobs, ensuring their job was done properly without incident.
- Used hoists to lift heavy objects onto the rig floor when necessary such as tubulars or pump parts being installed onto pumps and motors .
- Conducted routine inspections of mud pumps and motors for proper operation prior to use.
- Organized efficient daily work plans based on oral instructions and written directions to meet challenging objectives.
- Tracked parcel movement using hand-held scanners and daily production sheets to keep records accurate.
- Protected company inventory by maintaining and organizing storage areas.
- Operated manual and automated tongs to connect and disconnect drilling pipes and drill bits.
- Participated in rig mobilization and demobilization processes, ensuring safe and efficient operations.
- Managed the handling, sorting, and stacking of drilling pipes and drill strings.
- Mixed and tested drilling fluids, chemicals, and grouts.
- Ensured compliance with safety protocols and environmental regulations.
- Monitored and maintained proper drilling fluid levels and composition.
- Assisted with setting up and taking down drilling rig and various equipment.
- Maintained clean and hazard-free work areas to attain operational safety and regulatory compliance.
- Assisted in the alignment and positioning of drilling machinery.
- Managed inventory and ensured availability of necessary drilling supplies and equipment.
- Assisted in setting up and taking down drilling rigs and equipment.
- Performed regular inspections and maintenance on drilling equipment and tools.
- Obtained proper permits and completed job safety analysis (JSA) prior to beginning each new job.
- Conducted visual inspections to identify potential hazards and equipment wear.
- Guided pipes off racks into drilling rigs using tongs and other hand tools.
- Participated in safety meetings and drills, adhering to all safety policies and procedures.
- Assisted in the installation of blowout preventers and other well control equipment.
- Monitored drilling operations and reported any issues to the Driller.
- Assisted in troubleshooting and repairing minor mechanical problems on the rig.
- Transported, equipment and materials utilized for assembling drilling tool.
- Utilized hand and power tools to assist in drilling operations and equipment maintenance.
- Mixed, weighed or measured and monitored shaker and mud tank operations.
- Operated and maintained drilling rig diesel motors, transmissions, pumps, and drilling mud systems.
- Cleaned and prepared sites for drilling operations and post-operation clean-up.
- Manipulated sections of pipe and drill during drilling.
- Unloaded materials, devices and machine parts with hand tools.
- Recorded drilling activity and equipment logs accurately and timely.
- Moved drill tools, pipe, cement and other materials.
- Identified potential hazards, communicated them to supervisors, and took appropriate action to mitigate risks.
- Assisted extraction craft workers with operating earth drillers and derrick operators.
- Set up and took down drilling rig and equipment.
- Operated moving equipment to transport materials and parts to excavation sites.
- Monitored equipment operation during extraction process to detect problems.
- Removed debris after extraction activities to clean work area.
- Handled weighing, data recordkeeping and batch tracking.
- Trained under supervisors to learn correct, safe, and speedy extraction processes.
- Adjusted equipment to prepare for excavating and boring geological materials.
- Inspected blowout preventer systems on a regular basis for wear and tear and reported any issues found to supervisor immediately.
- Managed inventory and supplies to ensure materials were available when needed.
- Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
- Completed day-to-day duties accurately and efficiently.
- Worked effectively in team environments to make the workplace more productive.
- Provided support and guidance to colleagues to maintain a collaborative work environment.
- Performed general housekeeping duties around the rig site including sweeping floors and picking up debris.
- Transported tools, supplies and materials from one location to another using company vehicles or pickup trucks.
- Followed instructions given by driller regarding depth increments when tripping pipe into hole or pulling out of hole.
- Cleaned mud pits, tanks, separators, degassers and other equipment as needed.
- Observed loading activities at tank batteries making sure personnel followed all procedures outlined in company's safety manual pertaining to hazardous material handling.
- Installed safety lines between the rig floor and derrickman while running drill pipe, casing, tubing into the hole during tripping operations.
- Checked all components of BOP stacks before each connection was made up ensuring they were in proper working order with no visible damage present.
- Approached customers and engaged in conversation through use of effective interpersonal and people skills.
- Utilized hand tools such as wrenches, hammers, screwdrivers to perform maintenance tasks on derricks and related equipment.
- Updated and maintained databases with current information.
- Recognized by management for providing exceptional customer service.
- Managed household errands and other essential duties.
- Promoted high customer satisfaction by resolving problems with knowledgeable and friendly service.
- Prioritized and organized tasks to efficiently accomplish service goals.
- Conducted system analysis and testing to identify and resolve technical issues or inefficiencies.
Education
GED -
Brownwood High School
Brownwood, TX05-2022
Skills
- Repairing wall surfaces
- Truck loading
- Supply procurement
- Attention to detail
- Heavy machinery assistance
- Forklift operator
- Heavy lifting
- Active learning
- Task prioritization
- Time management
- Rigging and lifting assistance
- Teamwork and collaboration
- Equipment Repair
- Flexibility
- Equipment operation
- Hand and power tools
- Flexible schedule
- Hand-eye coordination
- Worker safety
Timeline
Cabinetry Helper
Oases cabinetry
04.2023 - Current
Oilfield Floorhand
Precision Drilling Company
10.2022 - 05.2023
Oilfield Floorhand
Nabors Drilling USA
04.2017 - 09.2022
GED -
Brownwood High School