Summary
Overview
Work History
Education
Skills
Timeline
Generic

Alejandro Gonzales

Pasadena

Summary

Boilermaker -mechanic leadman,foreman,good attitude,willing to succeed, safety number 1 goal.

Proven professional with exceptional record of strategic approaches to indicate operational efficiency with machines and equipment in plants. Expert knowledge with adjusting system components or removing and replacing defective parts. Excellent problem solver with strong electrical and mechanical skills.

Diligent professional experienced with many years maintaining mechanical efficiency for complex operations. Hardworking approach to surveying problem-resolution areas to address performance roadblocks. Detailed understanding of industry standards.

Methodical professional with several years of experience and aptitude for technical analysis. Practiced in maintenance and repair of equipment and highly skilled in reading and drafting mechanical blueprints. Team player with history of strict policy and procedure adherence.

Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.

Committed job seeker with a history of meeting company needs with consistent and organized practices. Skilled in working under pressure and adapting to new situations and challenges to best enhance the organizational brand.

Overview

16
16
years of professional experience

Work History

Boilermaker

ALS INDUSTRIAL SERVICES
07.2023 - 07.2025
  • First off make sure every equipment is correctly lock out and tagged, out isolated, and lower bleeder points roded out
  • Remove and Replace ball valves, globe valves, gate valves, butterfly valves, steam traps, man ways, control valves, xv valves etc
  • Demo and replace screw piping, remove and replace high level and low level switches, transmitters, instrumentation and bolt up
  • Replace gaskets and bolt up on valves, manways, and gaskets
  • Open up exchangers and condenser for tubing inspection and shell inspections, replace bolts and gaskets, make sure channel heads, rings, dollar plates, installed correctly and lined up, and the bundle installed correctly and leveled
  • Make sure all equipment where bolts were installed torque to spec
  • Have the experience in using the rad gun and inline pump for high torque
  • Remove and install bundles on coolers, exchangers, Mac coolers
  • Hydro test equipment with pressure by spec
  • Test and sell off any work order packages.
  • Replaced defective parts such as bearings, gears, valves, and seals.
  • Inspected, tested, repaired and maintained industrial machinery.
  • Repaired various types of production equipment including conveyors and pumps.
  • Assembled components of industrial machinery using hand tools and power tools.
  • Adjusted functional parts of devices or control instruments using hand tools or precision measuring instruments.
  • Maintained accurate records of repairs made on all machines within assigned area.
  • Operated machine tools to fabricate parts required for repair work.
  • Fabricated replacement parts from raw materials when necessary.
  • Ensured compliance with relevant regulations related to industrial mechanics.
  • Cleaned, lubricated, and maintained machinery in order to ensure optimal performance levels.
  • Ordered necessary spare parts from suppliers when needed for repair jobs.
  • Diagnosed electrical problems with the use of various testing devices.
  • Installed new machines according to manufacturer specifications.
  • Dismantled faulty machines and equipment in preparation for repair or reconditioning.
  • Performed preventive maintenance on machines and equipment.
  • Analyzed blueprints, schematics, drawings, manuals and other documents to determine the correct installation procedure for a given system or component.
  • Followed safety procedures at all times while working on industrial machinery.
  • Troubleshot mechanical systems to identify problems and develop solutions.
  • Calibrated gauges, meters and other instrumentation used in production processes.
  • Adjusted plant equipment to maintain proper performance and safe operating conditions.
  • Operated hoists and tools to safely handle and move parts and equipment.
  • Conducted preventive maintenance and repairs on equipment.
  • Installed and repaired basic mechanical systems, hydraulic systems, pneumatic systems and process control systems.
  • Disassembled malfunctioning equipment to identify issues and complete repairs using specialized tools.
  • Mastered industry tools to adjust mechanical equipment, improving functionality and reducing downtime.
  • Monitored machine operation and verified performance met production requirements.
  • Adhered to safety, health and environmental rules and regulations to avoid workplace injury and machine productivity.
  • Interpreted schematic drawings and diagrams prior to performing required maintenance.
  • Selected troubleshooting methodologies to find malfunctions in machine systems to conduct repairs.
  • Fabricated new parts to repair broken material.
  • Assessed system operations to identify potential areas requiring maintenance services.
  • Facilitated optimal efficiency in machinery with thorough cleaning, lubricating and adjustment of components.
  • Adjusted and repaired systems to meet manufacturers' performance specifications.
  • Operated equipment to cut, join, repair and fabricate components and equipment.
  • Entered codes and instructions to program computer-controlled machinery.
  • Disassembled machinery to remove parts and make repairs.
  • Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.
  • Tested equipment for proper operation following repairs or maintenance activities.
  • Constructed steel structures according to blueprints provided by engineers.
  • Followed safety procedures when working around high-pressure systems.
  • Used oxyacetylene torch to cut through steel plate for fabrication purposes.
  • Maintained records of all repair work performed on boilers and related machinery.
  • Inspected welds visually for defects such as cracks or porosity.
  • Assisted in the construction of new boilers from scratch according to customer specifications.
  • Measured and marked cutting lines on material using a ruler or scribe.
  • Installed and repaired boilers, pressure vessels, tanks, and other heavy metal fabrications.
  • Cleaned boiler firetubes with wire brushes to remove soot deposits after shutdowns.
  • Cut materials to size with torches and hand tools.
  • Operated cranes and hoists to move large objects during repair projects.
  • Replaced gaskets, valves, piping connections, and other components as needed.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Followed safety procedures and protocols to minimize equipment mishaps.
  • Mentored apprentices and inspected finished work to verify compliance with established requirements.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
  • Assembled and checked each boiler for defects.
  • Signaled to crane operator to lift components to specific positions.
  • Identified issues and brought to attention of foreman.
  • Studied blueprints to determine locations, relationships, and dimensions of parts.
  • Managed movement of materials and equipment to different job sites.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Cut, formed and welded steel to make and repair metal components.
  • Opened, cleaned and repaired pressure vessels.
  • Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.

Boilermaker Mechanic

Mundy Companies
Pasadena
01.2023 - 06.2023
  • First off make sure every equipment is correctly lock out and tagged, out isolated, and lower bleeder points roded out
  • Remove and Replace ball valves, globe valves, gate valves, butterfly valves, steam traps, man ways, control valves, xv valves etc
  • Demo and replace screw piping, remove and replace high level and low level switches, transmitters, instrumentation and bolt up
  • Replace gaskets and bolt up on valves, manways, and gaskets
  • Open up exchangers and condenser for tubing inspection and shell inspections, replace bolts and gaskets, make sure channel heads, rings, dollar plates, installed correctly and lined up, and the bundle installed correctly and leveled
  • Make sure all equipment where bolts were installed torque to spec
  • Have the experience in using the rad gun and inline pump for high torque
  • Remove and install bundles on coolers, exchangers, Mac coolers
  • Hydro test equipment with pressure by spec
  • Test and sell off any work order packages.
  • Replaced defective valves or gaskets on high-pressure steam lines.
  • Assisted other tradespeople in completing their tasks related to the installation of new boilers.
  • Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.
  • Repaired and replaced boiler components, such as tubes, pumps, valves, gauges, and safety devices.
  • Removed old boilers from sites after they had been decommissioned.
  • Installed new boilers in accordance with local codes and regulations.
  • Cleaned and maintained tools used for boiler repair work.
  • Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.
  • Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.
  • Constructed steel frames around boilers prior to installation.
  • Performed routine maintenance on boilers according to manufacturer's specifications.
  • Conducted tests of boiler systems to ensure proper functioning and safety standards were met.
  • Maintained and operated boilers to ensure optimal performance.
  • Operated cutting torches to cut metal parts according to blueprints or diagrams.
  • Read blueprints or technical drawings related to boiler installations.
  • Fabricated replacement parts needed during repairs using metalworking machines.
  • Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Cleaned pressure vessel equipment by using scrapers, wire brushes, and cleaning solvents.
  • Followed safety procedures and protocols to minimize equipment mishaps.
  • Mentored apprentices and inspected finished work to verify compliance with established requirements.
  • Signaled to crane operator to lift components to specific positions.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
  • Studied blueprints to determine locations, relationships, and dimensions of parts.
  • Identified issues and brought to attention of foreman.
  • Managed movement of materials and equipment to different job sites.
  • Assembled and checked each boiler for defects.
  • Read and understood drawings and used mathematical calculations for accurate results.
  • Shaped seams, joints, and irregular edges of pressure vessel sections and structural parts to attain specified fit of parts.
  • Opened, cleaned and repaired pressure vessels.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Cut, formed and welded steel to make and repair metal components.
  • Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
  • Located and marked reference points for columns or plates on boiler foundations using blueprints and measuring instruments.

Boilermaker Mechanic

Cima industrial
Pasadena
03.2021 - 01.2023
  • First off make sure every equipment is correctly lock out and tagged, out isolated, and lower bleeder points roded out
  • Remove and Replace ball valves, globe valves, gate valves, butterfly valves, steam traps, man ways, control valves, xv valves etc
  • Demo and replace screw piping, remove and replace high level and low level switches, transmitters, instrumentation and bolt up
  • Replace gaskets and bolt up on valves, manways, and gaskets
  • Open up exchangers and condenser for tubing inspection and shell inspections, replace bolts and gaskets, make sure channel heads, rings, dollar plates, installed correctly and lined up, and the bundle installed correctly and leveled
  • Make sure all equipment where bolts were installed torque to spec
  • Have the experience in using the rad gun and inline pump for high torque
  • Remove and install bundles on coolers, exchangers, Mac coolers
  • Hydro test equipment with pressure by spec
  • Test and sell off any work order packages.
  • Replaced defective valves or gaskets on high-pressure steam lines.
  • Recorded daily logs detailing all maintenance activities performed on each boiler unit.
  • Assisted other tradespeople in completing their tasks related to the installation of new boilers.
  • Troubleshot operating problems in existing boilers by conducting visual inspections and running diagnostic tests.
  • Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.
  • Repaired and replaced boiler components, such as tubes, pumps, valves, gauges, and safety devices.
  • Removed old boilers from sites after they had been decommissioned.
  • Installed new boilers in accordance with local codes and regulations.
  • Cleaned and maintained tools used for boiler repair work.
  • Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.
  • Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.
  • Constructed steel frames around boilers prior to installation.
  • Performed routine maintenance on boilers according to manufacturer's specifications.
  • Conducted tests of boiler systems to ensure proper functioning and safety standards were met.
  • Operated cutting torches to cut metal parts according to blueprints or diagrams.
  • Read blueprints or technical drawings related to boiler installations.
  • Fabricated replacement parts needed during repairs using metalworking machines.
  • Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Cleaned pressure vessel equipment by using scrapers, wire brushes, and cleaning solvents.
  • Followed safety procedures and protocols to minimize equipment mishaps.
  • Mentored apprentices and inspected finished work to verify compliance with established requirements.
  • Signaled to crane operator to lift components to specific positions.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
  • Studied blueprints to determine locations, relationships, and dimensions of parts.
  • Identified issues and brought to attention of foreman.
  • Managed movement of materials and equipment to different job sites.
  • Assembled and checked each boiler for defects.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Read and understood drawings and used mathematical calculations for accurate results.
  • Marked reference points for columns and plates on foundations using master straightedge.
  • Shaped seams, joints, and irregular edges of pressure vessel sections and structural parts to attain specified fit of parts.
  • Opened, cleaned and repaired pressure vessels.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Cut, formed and welded steel to make and repair metal components.
  • Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.

Boilermaker Mechanic

Refined industrial
Pasadena
03.2018 - 03.2021
  • First off make sure every equipment is correctly lock out and tagged, out isolated, and lower bleeder points roded out
  • Remove and Replace ball valves, globe valves, gate valves, butterfly valves, steam traps, man ways, control valves, xv valves etc
  • Demo and replace screw piping, remove and replace high level and low level switches, transmitters, instrumentation and bolt up
  • Replace gaskets and bolt up on valves, manways, and gaskets
  • Open up exchangers and condenser for tubing inspection and shell inspections, replace bolts and gaskets, make sure channel heads, rings, dollar plates, installed correctly and lined up, and the bundle installed correctly and leveled
  • Make sure all equipment where bolts were installed torque to spec
  • Have the experience in using the rad gun and inline pump for high torque
  • Remove and install bundles on coolers, exchangers, Mac coolers
  • Hydro test equipment with pressure by spec
  • Test and sell off any work order packages.
  • Replaced defective valves or gaskets on high-pressure steam lines.
  • Checked for gas leaks in pipes and joints using a combustible gas indicator.
  • Adjusted controls to maintain specified steam pressures or temperatures within prescribed limits.
  • Recorded daily logs detailing all maintenance activities performed on each boiler unit.
  • Assisted other tradespeople in completing their tasks related to the installation of new boilers.
  • Troubleshot operating problems in existing boilers by conducting visual inspections and running diagnostic tests.
  • Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.
  • Repaired and replaced boiler components, such as tubes, pumps, valves, gauges, and safety devices.
  • Removed old boilers from sites after they had been decommissioned.
  • Installed new boilers in accordance with local codes and regulations.
  • Cleaned and maintained tools used for boiler repair work.
  • Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.
  • Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.
  • Constructed steel frames around boilers prior to installation.
  • Performed routine maintenance on boilers according to manufacturer's specifications.
  • Conducted tests of boiler systems to ensure proper functioning and safety standards were met.
  • Maintained and operated boilers to ensure optimal performance.
  • Operated cutting torches to cut metal parts according to blueprints or diagrams.
  • Read blueprints or technical drawings related to boiler installations.
  • Fabricated replacement parts needed during repairs using metalworking machines.
  • Sealed joints between sections of the boiler shell with cement mortar or asbestos packing.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Cleaned pressure vessel equipment by using scrapers, wire brushes, and cleaning solvents.
  • Mentored apprentices and inspected finished work to verify compliance with established requirements.
  • Signaled to crane operator to lift components to specific positions.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
  • Studied blueprints to determine locations, relationships, and dimensions of parts.
  • Identified issues and brought to attention of foreman.
  • Managed movement of materials and equipment to different job sites.
  • Assembled and checked each boiler for defects.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Read and understood drawings and used mathematical calculations for accurate results.
  • Opened, cleaned and repaired pressure vessels.
  • Shaped seams, joints, and irregular edges of pressure vessel sections and structural parts to attain specified fit of parts.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Cut, formed and welded steel to make and repair metal components.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.

Boilermaker

JV DRIVER INDUSTRIAL
Pasadena
02.2016 - 02.2018
  • First off make sure every equipment is correctly lock out and tagged, out isolated, and lower bleeder points roded out
  • Remove and Replace ball valves, globe valves, gate valves, butterfly valves, steam traps, man ways, control valves, xv valves etc
  • Demo and replace screw piping, remove and replace high level and low level switches, transmitters, instrumentation and bolt up
  • Replace gaskets and bolt up on valves, manways, and gaskets
  • Open up exchangers and condenser for tubing inspection and shell inspections, replace bolts and gaskets, make sure channel heads, rings, dollar plates, installed correctly and lined up, and the bundle installed correctly and leveled
  • Make sure all equipment where bolts were installed torque to spec
  • Have the experience in using the rad gun and inline pump for high torque
  • Remove and install bundles on coolers, exchangers, Mac coolers
  • Hydro test equipment with pressure by spec
  • Test and sell off any work order packages.
  • Replaced defective valves or gaskets on high-pressure steam lines.
  • Checked for gas leaks in pipes and joints using a combustible gas indicator.
  • Adjusted controls to maintain specified steam pressures or temperatures within prescribed limits.
  • Recorded daily logs detailing all maintenance activities performed on each boiler unit.
  • Troubleshot operating problems in existing boilers by conducting visual inspections and running diagnostic tests.
  • Assisted other tradespeople in completing their tasks related to the installation of new boilers.
  • Inspected boilers for problems with pressure levels, water levels, temperature control or fuel supply.
  • Repaired and replaced boiler components, such as tubes, pumps, valves, gauges, and safety devices.
  • Removed old boilers from sites after they had been decommissioned.
  • Installed new boilers in accordance with local codes and regulations.
  • Cleaned and maintained tools used for boiler repair work.
  • Provided guidance and instruction regarding safe operation of newboilers to customers upon completion of installation projects.
  • Used hand tools such as wrenches, screwdrivers, hammers and pliers to complete repairs on boilers.
  • Performed routine maintenance on boilers according to manufacturer's specifications.
  • Constructed steel frames around boilers prior to installation.
  • Conducted tests of boiler systems to ensure proper functioning and safety standards were met.
  • Operated cutting torches to cut metal parts according to blueprints or diagrams.
  • Read blueprints or technical drawings related to boiler installations.
  • Fabricated replacement parts needed during repairs using metalworking machines.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Cleaned pressure vessel equipment by using scrapers, wire brushes, and cleaning solvents.
  • Followed safety procedures and protocols to minimize equipment mishaps.
  • Mentored apprentices and inspected finished work to verify compliance with established requirements.
  • Signaled to crane operator to lift components to specific positions.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
  • Identified issues and brought to attention of foreman.
  • Studied blueprints to determine locations, relationships, and dimensions of parts.
  • Managed movement of materials and equipment to different job sites.
  • Assembled and checked each boiler for defects.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Read and understood drawings and used mathematical calculations for accurate results.
  • Shaped seams, joints, and irregular edges of pressure vessel sections and structural parts to attain specified fit of parts.
  • Opened, cleaned and repaired pressure vessels.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Cut, formed and welded steel to make and repair metal components.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Located and marked reference points for columns or plates on boiler foundations using blueprints and measuring instruments.

Boilermaker

Tis
Pasadena
01.2010 - 02.2016
  • First off make sure every equipment is correctly lock out and tagged, out isolated, and lower bleeder points roded out
  • Remove and Replace ball valves, globe valves, gate valves, butterfly valves, steam traps, man ways, control valves, xv valves etc
  • Demo and replace screw piping, remove and replace high level and low level switches, transmitters, instrumentation and bolt up
  • Replace gaskets and bolt up on valves, manways, and gaskets
  • Open up exchangers and condenser for tubing inspection and shell inspections, replace bolts and gaskets, make sure channel heads, rings, dollar plates, installed correctly and lined up, and the bundle installed correctly and leveled
  • Make sure all equipment where bolts were installed torque to spec
  • Have the experience in using the rad gun and inline pump for high torque
  • Remove and install bundles on coolers, exchangers, Mac coolers
  • Hydro test equipment with pressure by spec
  • Test and sell off any work order packages.
  • Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.
  • Tested equipment for proper operation following repairs or maintenance activities.
  • Constructed steel structures according to blueprints provided by engineers.
  • Followed safety procedures when working around high-pressure systems.
  • Used oxyacetylene torch to cut through steel plate for fabrication purposes.
  • Maintained records of all repair work performed on boilers and related machinery.
  • Assisted in the construction of new boilers from scratch according to customer specifications.
  • Measured and marked cutting lines on material using a ruler or scribe.
  • Installed and repaired boilers, pressure vessels, tanks, and other heavy metal fabrications.
  • Diagnosed problems with boilers and related equipment using technical manuals.
  • Cleaned boiler firetubes with wire brushes to remove soot deposits after shutdowns.
  • Cut materials to size with torches and hand tools.
  • Replaced gaskets, valves, piping connections, and other components as needed.
  • Operated cranes and hoists to move large objects during repair projects.
  • Assembled parts into complete units by welding them together.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Cleaned pressure vessel equipment by using scrapers, wire brushes, and cleaning solvents.
  • Followed safety procedures and protocols to minimize equipment mishaps.
  • Mentored apprentices and inspected finished work to verify compliance with established requirements.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
  • Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
  • Signaled to crane operator to lift components to specific positions.
  • Studied blueprints to determine locations, relationships, and dimensions of parts.
  • Identified issues and brought to attention of foreman.
  • Managed movement of materials and equipment to different job sites.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Marked reference points for columns and plates on foundations using master straightedge.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Cut, formed and welded steel to make and repair metal components.

Education

Sam Rayburn High School
Pasadena, TX

Skills

  • Forklift
  • Mechanic Experience
  • Brake Repair
  • Boiler
  • Automotive diagnostics
  • Service technician experience
  • Industrial Maintenance
  • Read P&IDs (10 years)
  • High torque tech (10 years)
  • Remove and install bundles,plug tubes,roll tubes (10 years)
  • Hydro test (10 years)
  • Complete work order packages and sell off to Qc (10 years)
  • Maintenance and repairs
  • Documentation And Reporting
  • Hand and power tools
  • Workplace Safety
  • Precision measurement
  • Mechanical Systems
  • Electrical Repairs
  • Hydraulic systems
  • Lockout and tagout procedures
  • Seal replacement
  • Power Tool Operation
  • Mechanical Aptitude
  • Troubleshooting
  • Equipment Troubleshooting
  • Teamwork and Communication

Timeline

Boilermaker

ALS INDUSTRIAL SERVICES
07.2023 - 07.2025

Boilermaker Mechanic

Mundy Companies
01.2023 - 06.2023

Boilermaker Mechanic

Cima industrial
03.2021 - 01.2023

Boilermaker Mechanic

Refined industrial
03.2018 - 03.2021

Boilermaker

JV DRIVER INDUSTRIAL
02.2016 - 02.2018

Boilermaker

Tis
01.2010 - 02.2016

Sam Rayburn High School

Similar Profiles

CREATE PROFILE
Alejandro Gonzales