Alejandro Mora
Arlington,TX
Summary
Knowledgeable Structural Mechanic/Technician/Assembler with 15 years’ experience. Skilled in reading and interpreting blueprints, diagrams and drawings. Successfully used written/verbal instructions to perform the fabrication and assembly of primary/secondary parts/sub-assemblies in the completion of general assemblies in maintenance, repair and overhaul of airframe structures.
Overview
16
16
years of professional experience
Work History
Structures/ Composites Mechanic
Evans Composites Inc
05.2021 - Current
- Responsible for Reading and Interpreting Aircraft Blueprints, Engineering Drawings and Technical Data.
- Performed structural repairs completely, accurately and in a timely manner, by researching necessary data, Blueprints, installation guides, Engineering drawings, Aircraft specifications, Structural Repair manual, manufacture manuals, IPC, and/or any other applicable manuals.
- Repaired Ailerons Dent Damage Using Structure Manuel’s and CMM to remove outer skin.
- Cut out and/or replaced damaged core.
- Repaired L/E Outer Skin Structure Dents to allowable limits thru cold work & Measurements with micrometer, calipers and Depth Gauge.
- Complete disassembly Of Inlets, Aileron, Vertical stab, Winglet and Fan cowl doors Set for Inspection.
Structure/ Composites Mechanic
Spirit Aerospace Systems MRO
01.2020 - 05.2021
- Repairs/ overhauls of composite and sheet metal parts.
- Worked on RB211 E4B T/R, V2500 T/R, RB 710 T/R, CRJ 700 - 900 T/R, CRJ200 T/R, CRJ Fan cowl door, CRJ tail pipes and tail cones Q400 flight controls, RB211 E4B Inlets, V2500 Inlets, CRJ Inlets, RB710 Fan cowl door.
- Clarify assignment goals to be accomplished, select proper tools, correct materials, operational procedures and techniques.
- Verified certifications required to perform task were up to date before requesting collaboration with Quality.
- Performed Primary/Secondary Structural installations, removals and modifications.
Structures Mechanic
HSGI @ Bombardier MRO
03.2019 - 01.2020
- Responsible for Reading and Interpreting Aircraft Blueprints, Engineering Drawings and Technical Data to assemble structures using layout materials, installation of fasteners using aerospace tools and installation procedures in accordance with Customer’s Process Standards.
- Instructed/Practiced safe and proper use of various 3- M cartage, disposable respirators, remote overhead bridge cranes, manual and electric pallet jacks, operation of air tools, sanders, grinders and their multi attachments cut – off wheels and rotary file.
- Earned all mandatory certifications required for Structural Mechanics to perform and sign – off repairs, modifications, maintenance and/or manufacture assigned work task.
- Successfully performed and completed all assigned work task to satisfaction of Management, Quality Assurance, and Customers.
- Successfully performed precision lay outs using complex dimensions, radiuses, angles and fabrication sequences including but not limited to forming and bending of parts, assembling of sub-assemblies and/or general assemblies with pleasing contours, proper gaps, spacing, chamfers, de-burring, breaking sharp edges etc., as required in accordance with original design configurations to ensure fit, function and structural integrity.
Sheet Metal Tech/Avionics
4M Logistics @ Joint Naval Base
03.2018 - 01.2019
- Installation of Automatic dependent surveillance – broadcast (ADS – B) On Lockheed C-130 Hercules.
- Following Engineering Prints for drilling and locating ADS – B Antenna on Aircraft.
- Installation of Shelves to secure ADS – B components.
- Routing, lacing & zip tying wires for components.
- Used prints and installation outlines to locate, lay out, drilled and install call-out fasteners with require primers and/or sealants.
- Laid out then trim and shim as required, step drilling hole preparations and selecting proper fasteners to install fuselage framing and skins.
Aircraft Structures Mechanic
Strom @ GDC
11.2018 - 12.2018
- Measuring, drilling and installation of floor pallet structure on Boeing 787/777 Aircraft.
- Drilling, locating & installation of WIFI Antennas.
- Daily Obtaining latest Work Order/technical data available for clarification of assigned goals to be accomplished, researched, read and interpreted prints, to select proper layout and installation procedures gather correct materials, fasteners and tools.
- Safe and proper operation of hand – electric, pneumatic and hydraulic power tools (drills motors, rivet guns, bucking bars, huck guns, rev-nut pullers etc.) Specialty tools and hardware used for installing interior furniture.
Structures/Repairman
Bombardier
06.2015 - 11.2018
- Reinstall, repair or replace parts through subsequent riveting on CRJ 200, 700 and 900.
- Ensured that work accomplished met FAA requirements and customer specifications
- Coordinated with Quality Control department to ensure conformity with drawings and approved repair station procedures.
- Performed disassembly, repair and reassembly of structural parts and flight control surfaces such as wings, stabilizers, fuselages, tails, rudders, tabs and access panels to maintain quality assurance and follow engineering specifications.
- Removed and replaced passenger seats, carpets, floorboards and insulation, in accordance with manufacture manuals.
Sheet Metal Technician
Aerotek Aviation, Bombardier
08.2013 - 06.2015
- Locate and mark dimensions and reference lines on defective or replacement parts using templates, scribes and scales.
- Fabricate and repair defective sections or parts using Shears, Brakes, Rollers, Shrinker/Stretcher, English Wheel, Bend Allowance & Bend Deduction.
- Successfully preformed and completed all assigned work task to satisfaction of Management, Quality Assurance, and customers.
- Successfully performed precision lay out using complex dimensions, radiuses, angles and fabrication sequences including but not limited to forming and bending of sheet metal, assembling of sub-assemblies and/or general assemblies with pleasing contours, proper gaps, spacing, chamfers, de-burring, breaking sharp edges etc., as required in accordance with original design configurations to ensure fit, function and structural integrity.
Global Aircraft Services, Lufthansa Technik
01.2010 - 08.2013
- Restoration Lockheed L- 1049 Super Constellation
- Assemble aircraft structures and associated components with aid of jigs and fixtures by drilling, filing, reaming, countersinking, dimpling, burring and fastening.
- Assists in close tolerance assembly operations such as shimming, fitting, trimming and aligning where variances may occur considerably from one assembly to another as with fairings and mating surfaces of major structural assemblies.
- Assisted in replacement of rib, stiffeners and stringers.
- Clearly documented maintenance and repair actions, equipment status tags, logs and parts request forms.
Fuel Tank Specialist/ Structures Mehanic
Global Aircraft Services
02.2008 - 01.2010
- Performed scheduled maintenance, repair on various assemblies, sub-assemblies and other aircraft parts such as (Falcon 10, 20 and 50) Learjet, King Airs, West Wind, Citations, Hawkers, MD- 80, DC9, A4 and numerous other types of aircrafts.
- Performed 100- hour inspections, leak checks, fuel bladder replacement.
- Removed and replaced tanks, probes, boost pumps, crash plates, keels, dome nuts, nut tracks, hi-Lok/ hi-lite.
- Performed various maintenance tasks inside fuel cells.
Education
Diploma -
South Grand Prairie High School
Grand Prairie, TX2007
Skills
- Fabrication professional
- Interpret Blueprints/Technical Data
- Precision Lay Outs
- Form, Bend, Trim & Shim
- Step Drill Hole Preparations
- Parts/ Assembly installations
- Select Proper Tools & Installation Procedures
- Application of Drawing
- Call-outs of Alodine, Primers, Sealants etc
- Preform, Complete and Sign-Off Operational Sequences with Quality Assurance Collaborations
Timeline
Structures/ Composites Mechanic
Evans Composites Inc
05.2021 - Current
Structure/ Composites Mechanic
Spirit Aerospace Systems MRO
01.2020 - 05.2021
Structures Mechanic
HSGI @ Bombardier MRO
03.2019 - 01.2020
Aircraft Structures Mechanic
Strom @ GDC
11.2018 - 12.2018
Sheet Metal Tech/Avionics
4M Logistics @ Joint Naval Base
03.2018 - 01.2019
Structures/Repairman
Bombardier
06.2015 - 11.2018
Sheet Metal Technician
Aerotek Aviation, Bombardier
08.2013 - 06.2015
Global Aircraft Services, Lufthansa Technik
01.2010 - 08.2013
Fuel Tank Specialist/ Structures Mehanic
Global Aircraft Services
02.2008 - 01.2010
Diploma -
South Grand Prairie High School
Similar Profiles
Jonny RoskiJonny Roski
Production Control Coordinator at Evans Composites Inc.Production Control Coordinator at Evans Composites Inc.
Erick EsquivelErick Esquivel
Aircraft Structures Mechanic at Evans Composites Inc.Aircraft Structures Mechanic at Evans Composites Inc.
Eric ThompsonEric Thompson
Analytical Chemist at Polynt Composites U.S.A., Inc.Analytical Chemist at Polynt Composites U.S.A., Inc.
Rahul Reddy LankalaRahul Reddy Lankala
Software Engineer at Kaiser PermanenteSoftware Engineer at Kaiser Permanente
Monnise JenningsMonnise Jennings
Special Education Teacher at Boulevard Heights Transition CenterSpecial Education Teacher at Boulevard Heights Transition Center