Summary
Overview
Work History
Education
Skills
Timeline
Generic

Alexander Rassiga

Louisville,KY

Summary

Efficient and Energetic Maintenance professional skilled in task delegation, maintenance scheduling and team oversight. Commended for quality performance and reliability demonstrated over 5 plus years of industry experience in industrial and commercial maintenance . Advanced knowledge of Industrial Production Equipment maintenance and repairs. Well-versed in analysis, identification and mitigation of safety hazards. Adept at reducing production downtime through scheduling, inspection and troubleshooting management.

Overview

12
12
years of professional experience

Work History

Lead Service Technician

Paulies Plumbing And Services
09.2022 - Current
  • Responded to customer inquiries quickly and professionally to increase satisfaction.
  • Explained diagnostic findings to customers and outlined repair or service options.
  • Maintained accurate records of service calls and customer interactions for training and accountability purposes.
  • Installed new equipment and explained operation and routine maintenance protocols to customers.
  • Read and followed technical documentation to complete accurate repairs.
  • Explained maintenance and repair needs to customers and offered advice on preventative maintenance.
  • Repaired and replaced worn and damaged components.
  • Installed, repaired and maintained water, gas and sewer systems.
  • Worked non-standard and on-call hours and weekends on rotational basis and patiently focused on customer needs.
  • Maintained, installed, repaired and altered piping systems, plumbing fixtures, traps and soil waste and vent pipes.
  • Performed routine maintenance of plumbing systems in residential and commercial buildings.
  • Mastered and adhered to plumbing codes, installation requirements and governmental regulations.
  • Executed plumbing services in tight quarters and easily bent, squatted, crawled, climbed and reached.
  • Planned pipe system layout, installation and repair according to specifications.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Measured, threaded, and cut materials to correct angles.

Electromechanical Technician

Hussey Copper
03.2021 - 09.2022
  • Fixed, serviced and mounted pumps, gearboxes and piping systems.
  • Maintained neat and clean work area to eliminate hazards.
  • Investigated electrical malfunctions with ammeter, multimeter and temperature probe test instruments to determine problems and apply solutions.
  • Repaired, maintained and installed motors, drives and wiring devices.
  • Observed equipment functioning to detect electronic and mechanical hazards or problems for service, repair or replacement.
  • Welded structural type steel, aluminum, stainless steel and pipe materials using tig, mig and stick welding techniques.
  • Identified and specified required parts to repair and rebuild manufacturing equipment.
  • Obtained forklift and aerial lift platform licenses to meet optimum labor utilization.
  • Fabricated fixtures, stands and covers and assembled components from sketches and drawings.
  • Read blueprints, schematics or diagrams to determine methods and assembly sequences.
  • Completed skilled soldering, corrections and wiring tasks to produce high-quality work.
  • Read and interpreted blueprints, technical drawings, schematics, and computer-generated reports.

Maintenance Technician

AAK
02.2020 - 12.2020
  • Operated varied hand and power tools to complete repairs.
  • Troubleshot equipment breakdowns and performed preventive maintenance.
  • Used problem-solving skills to alleviate issues efficiently with minimal supervision.
  • Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
  • Followed safety protocols to minimize workplace accidents.
  • Completed daily, weekly, and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
  • Inspected and maintained equipment to keep items in top working condition.
  • Quickly responded to internal service calls regarding malfunctioning equipment and completed repairs.
  • Installed new locks, door handles, and door closers.
  • Monitored and documented work performance in maintenance logs in compliance with company guidelines.

shift Maintenance Supervisor

JBS USA Holdings Inc, Holdings Inc
09.2015 - 03.2019
  • Adhered to strict operation and maintenance regulations by following instructions and observing guidelines
  • Consulted blueprints and repair manuals to complete high-quality repairs and restore optimal functionality
  • Supervised facility operations, including preventive maintenance projects, employee tasks and performance and adherence to safety standards while implementing new ones as well
  • Delegated tasks to capable employees to efficiently manage resources
  • Monitored maintenance scheduling and reported maintenance team information to management
  • Maintained building electrical system, replacing wall sockets, replacing drop line sockets, running lines and completing basic carpentry and conduit runs/tray builds to finish installations
  • Collaborated with multiple departments to maximize workflow and efficiency
  • Provided insight and information to upper management regarding onsite improvement project specifications
  • Removed snow from sidewalks using shovels and heavy equipment and placed rock salt to prevent falls
  • Managed and delegated duties to [12-20] employees
  • Implemented improved training procedures to better develop new personnel
  • Collected data to compile detailed reports for upper management and closely monitored equipment, tools and system upgrades
  • Coordinated with outside vendors to prepare for large equipment installations and complex repairs
  • (CO2 stunning systems)(BUTINA)
  • Used electrical drawings to troubleshoot and repair electromechanical, pneumatic systems and CO2 systems
  • Specialized in CO2 kill systems, vacume systems, waste water systems, and rendering systems completing thorough inspections and skilled repairs
  • Designed, fabricated and installed upgrades to improve existing equipment
  • Assisted the team in completing job tasks quickly and accurately with appropriate use of instruments and tools
  • Overhauled, installed and repaired equipment, including centrifugal compressors, pumps, valves, separators and generators
  • Eliminated downtime, designed effective budgets, allocated tasks and maintained high standards of production to optimize productivity
  • (Cost
  • Champions)
  • Oversaw onsite safety compliance, reducing overall incidents and promoting ongoing adherence
  • Identified and implemented new method for streamlining the Dehair and pocket process that resulted in increased workflow by 47%
  • Performed repair work on pneumatic saws and separation equipment, typically returning machines and tools to service within 30 to 35 minutes
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures
  • Double checked supply inventories to ensure project specific correctness and optimize work readiness
  • Dismantled equipment to efficiently access, remove and replace defective parts for quick repairs
  • Safely and efficiently finished repairs while supporting team members with tasks
  • Used rulers and micrometers to inspect parts to determine changes in dimension requirements
  • Installed, aligned and balanced new equipment and supervised employees
  • Diagnosed equipment malfunctions and completed repairs to restore equipment and maintain uptime
  • Repaired leaking faucets, clogged toilets and other equipment to keep bathrooms fully functional
  • Coordinated tooling changeovers, setups and repairs to minimize downtime and improve productivity
  • Assessed upper and lower property areas for damage caused by bad weather and notified plant engineer of findings
  • Implemented new component, fixture and motor systems to increase power flow abilities
  • Managed maintenance activities, including supervising staff and inspecting equipment
  • Operated light, fan, plumbing, hydraulic, electrical and pneumatic systems and managed employees
  • Assessed daily workloads, scheduled and planned daily assignments and oversaw numerous projects
  • HAZMAT TEAM (I/C)
  • FIRST RESPONDER
  • JBS USA
  • Louisville, ky

Master Mechanic / Butina Specialist

09.2015 - 10.2017
  • Operated hand and power tools to complete repairs in safe and accurate manner
  • Monitored building security and safety by locking doors after operating hours and checking electrical appliances to prevent safety hazards
  • Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities
  • Performed simple fabrication tasks, including installing shelves, hooks and catwalks to meet department needs
  • Evaluated systems in use to uncover problems, complete maintenance and recommend solutions to the Maintenance Supervisor
  • Consulted blueprints and repair manuals to complete high-quality repairs and restore optimal functionality
  • Contributed to operational quality and efficiency via instrumental calibration, application of quality controls and implementation of maintenance functions
  • Inspected components of industrial equipment for accurate assembly and oversaw installations to prohibit defects, such as loose connections, frayed wires and bad welds
  • Dismantled equipment to efficiently access, remove and replace defective parts for quick repairs
  • Updated documentation for recordkeeping and Supervisor use
  • Utilized drawings, blueprints and schematics of building and systems layout as well as machinery construction
  • Put in replacement parts and components as well as entire systems
  • Used rulers and micrometers to inspect parts to determine changes in dimension requirements
  • Maintained and kept MPS Butina Kill Systems to Government Regulation and optimal performance to better serve the company and the animals, while maintaing safe working conditions
  • HAZMAT TEAM
  • FIRST RESPONDER TEAM

Crew Chief / Lead Mechanic

U.S. LAWNS
01.2014 - 11.2014
  • Maintained team flexibility by teaching members all key roles
  • Read and followed landscaping plans to install plants and fixtures for, residences and businesses
  • Created landscape designs to be presented to clients
  • Installed irrigation systems, rock gardens and ponds according to customer specifications to simplify watering needs.(ECO FRIENDLY)(WATER
  • CONSERVATION)
  • Troubleshot mechanical issues and completed basic repairs to keep equipment working at peak levels
  • Implemented regular landscaping schedule to promote optimal growth and maintain attractive appearance of lawns and facility grounds.(PM'S)
  • Supervised [10] day laborers in completing large landscaping projects
  • Developed exceptional attendance record with special attention to punctuality and preparation to work upon arrival
  • Oversaw various projects from conceptualization to completion
  • Resolved conflicts and negotiated agreements between parties in order to reach win-win solutions to disagreements and clarify misunderstandings
  • Provided onsite training
  • Delivered an exceptional level of service to each customer by listening to concerns and answering questions
  • Monitored multiple databases to keep track of all company inventory

Certified Nursing Assistant

Norton Healthcare
06.2012 - 01.2014
  • Consulted with nurses to develop patient care plans and evaluate treatment options
  • Documented patient intake and dietary requirements and assisted with feeding to promote proper patient nutrition
  • Responded to patient alarms and needs-assessment requests to identify course of treatment
  • Fostered relationships with patients, caregivers and healthcare teams to achieve individual care plan targets
  • Prevented infection and cross-contamination by cleaning and sanitizing rooms and equipment using aseptic technique
  • Preserved patient dignity and minimized discomfort by carrying out duties such as bedpan changes, diapering and bathing
  • Supported diagnostic and treatment procedures, including setting up and operating specialized medical equipment
  • Maintained accurate, timely flow of information by completing thorough patient records and updating healthcare team on patient status
  • Monitored and replenished medical supply inventory, facilitating optimal availability for patient care
  • Volunteered to work additional shifts and overtime during busy periods to maintain proper staffing and floor coverage
  • Exhibited compassionate care and communication regarding issues surrounding death and dying
  • Provided personal nursing care in pre- and post-operative situations
  • Conducted routine checks on standard patient vitals, including blood pressure, blood sugar and heart rate
  • Facilitated activities of daily living, including personal hygiene management, feeding and ambulation

Education

Red Cross Accelerated Nursing program -

Louisville, Ky

Master - undefined

MPS - undefined

Louisville, Minnesota City, KY, MN
2016

CNA in Nursing Assistance - undefined

St. Francis DeSales High School
Louisville, KY
2012

High School Diploma - Accomplishments

Eagle Scout CNA
2008

Skills

  • Electronic charting
  • Documentation procedures expert
  • Medical terminology knowledge
  • Quick problem solver
  • Safety protocols
  • Resource allocation
  • Team leadership
  • General plumbing
  • Light carpentry
  • Fabrication
  • Welding
  • Instrument Calibration
  • Customer service experience
  • Dependable independent worker
  • Warranty claims
  • Blueprint interpretation
  • Driving hi-lo
  • Driving/Operating any Heavy Equipment
  • Job status reports
  • Hydraulic activity skills
  • Hydraulic press brake machinery
  • Good at following instructions
  • Clean DOT
  • Computer literate
  • Production line/assembly line forklift experience
  • Flexible work schedule
  • English/Spanish literate
  • Knowledge of industrial control software
  • OSHA Certified
  • Managing large crews
  • Proficiency with mechanical and electric tools
  • Solid communication skills
  • Schematics reading
  • Lifting up to 100 lbs
  • Troubleshooting at component level
  • OSHA regulatory compliance
  • PLC Knowledge
  • Team player
  • Quality control
  • Timely project completion
  • Deadline driven
  • Good mechanical aptitude
  • Hazardous materials
  • High school diploma
  • Welder certificate (JBS)
  • HAZMAT CERT

Timeline

Lead Service Technician

Paulies Plumbing And Services
09.2022 - Current

Electromechanical Technician

Hussey Copper
03.2021 - 09.2022

Maintenance Technician

AAK
02.2020 - 12.2020

shift Maintenance Supervisor

JBS USA Holdings Inc, Holdings Inc
09.2015 - 03.2019

Master Mechanic / Butina Specialist

09.2015 - 10.2017

Crew Chief / Lead Mechanic

U.S. LAWNS
01.2014 - 11.2014

Certified Nursing Assistant

Norton Healthcare
06.2012 - 01.2014

Red Cross Accelerated Nursing program -

Master - undefined

MPS - undefined

CNA in Nursing Assistance - undefined

St. Francis DeSales High School

High School Diploma - Accomplishments

Eagle Scout CNA

Similar Profiles

CREATE PROFILE
Alexander Rassiga