Alfredo Gonzalez Aguirre
Aurora,CO
Summary
Looking to bring acquired knowledge and experience over 13 years in different exhibit and production environments, encompassing carpentry/fabrication, machining / CNC software, cost estimation, install and dismantle set up, packing & shipping, and assisting sales and project management departments, back to InterGlobal Exhibits to help improve fabrication and project management operations. I believe my recent tenures at Closet Factory and Proctor Productions have given me a different perspective of how other companies operate, expanded my knowledge and proficiency with different CNC machines and software, as well as expanding my carpentry skills and observing and being a part of different approaches to planning, building, and setting up familiar and unique exhibit designs. I feel that this added experience will make me an asset returning to InterGlobal Exhibits not just in the fabrication/machining department, but also in the planning, design, and management of exhibit builds and I would add a fresh voice in the team process with sales, design, graphics and other departments in putting together the best exhibits.
Overview
20
20
years of professional experience
Work History
Carpenter /CNC Machinist
Proctor Productions
Denver, CO
08.2021 - 11.2024
- Measured, cut and shaped wood materials to specifications using power tools, such as saws and routers.
- Repaired or replaced damaged structures or components.
- Built jigs and fixtures to assist in the production of parts.
- Read blueprints, schematics and drawings to determine layout requirements.
- Prepared surfaces by sanding or scraping off old finishes prior to refinishing them.
- Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces.
- Maintained a clean job site at all times by disposing of debris properly after each shift.
- Performed routine maintenance on carpentry equipment such as saws and drills.
- Used various carpenter's hand tools, portable power tools and standard measuring instruments.
- Used band, circular and table saws.
- Communicated with teammates and supervisors frequently to understand requirements and complete projects on time.
- Set up and operate CNC machines to perform tasks such as drilling, milling, and routing.
- Monitor CNC machine operations to detect malfunctions or out-of-tolerance machining and adjust machine controls as necessary.
- Perform minor maintenance on the CNC machines such as replacing cutting tools or cleaning machinery parts.
- Verify conformance of finished workpiece to specifications by measuring with appropriate instruments.
- Make adjustments to the machine feed rate, speed and depth of cut for each project.
- Use V-Carve computer software for programming CNC Machine.
- Test completed workpieces for quality control purposes prior to shipment.
- Troubleshoot malfunctions in the CNC machinery when necessary.
- Load raw materials into production equipment; unload finished goods from production equipment.
- Replace cutting tools according to job requirements; inspect tool condition regularly for wear and damage.
- Modify programs according to customer requests and specifications; review all changes before implementation.
- Document all repair activities including parts used and labor hours expended.
- Changed out aging tools, fixtures and offsets.
- Worked from layout and work order, created programs and set up machines to produce required parts.
- Measured, marked and indicated dimensions and reference points on materials.
- Inspected material after completion for accurate measurements of dimensions.
- Calculated dimensions or tolerances using micrometers or vernier calipers.
- Read and followed blueprints, diagrams and drawings to fabricate products.
- Separated scrap waste and related materials for reuse or recycling.
- Tested experimental models to determine standardization and feasibility of design.
- Labeled boxes, containers, and pallets for shipment purposes.
- Operated forklift to move, load, and unload materials from trucks or other vehicles.
- Collected empty pallets for reuse or disposal in accordance with company policy.
- Assisted in loading outgoing shipments onto delivery trucks and ensuring security of cargo loads.
- Worked additional hours and shifts to meet tight deadlines during peak periods.
- Used pallet jacks to move items to and from warehouse locations.
- Installed protective bracing, padding, or strapping, to prevent shifting or damage to items being transported.
CNC Machinist
Closet Factory
Englewood, CO
09.2020 - 08.2021
- Set up and operate CNC machines to perform tasks such as drilling, milling, turning, and grinding.
- Monitor CNC machine operations to detect malfunctions or out-of-tolerance machining and adjust machine controls as necessary.
- Perform minor maintenance on the CNC machines such as replacing cutting tools or cleaning machinery parts.
- Calculate dimensions and tolerance using knowledge of mathematics and instruments such as micrometers or vernier calipers.
- Make adjustments to the machine feed rate, speed and depth of cut for each project.
- Maintain records of approved and defective units or final products.
- Load raw materials into production equipment; unload finished goods from production equipment.
- Replace cutting tools according to job requirements; inspect tool condition regularly for wear and damage.
- Utilize manual machining techniques when required; complete projects within allotted time frames.
- Changed out aging tools, fixtures and offsets.
- Inspected material after completion for accurate measurements of dimensions.
- Maintained a clean workspace throughout the duration of each job.
- Utilized basic carpentry tools such as saws, drills and sanders safely.
- Sanded down rough edges on wood panels prior to assembly.
- Installed closet shelving, rods and drawers according to design specifications.
- Assembled pre-fabricated closets in accordance with manufacturer's instructions.
- Installed drawer slides, door hinges and handles correctly.
- Applied finishing touches such as trim, molding or paint to complete the job.
- Assisted in measuring and cutting materials for closet installations.
- Loaded and unloaded material from trucks, ensuring that all items were accounted for.
- Ensured all closet components fit together securely prior to installation.
- Cleaned up any mess created during installation process before leaving job site.
- Provided feedback to supervisor regarding any issues encountered during install jobs.
- Operated hand tools, saws, routers and sanding equipment to prepare materials and finish project surfaces.
- Operated edgebander machine to cut and bind vinyl edges with a variety of decorative tapes.
- Performed maintenance on edgebanding machine, including oiling, cleaning, and adjusting settings.
- Troubleshot mechanical problems with edgebanding maching in order to minimize downtime.
- Worked closely with other team members to ensure efficient workflow processes.
Estimator
InterGlobal Exhibits
Englewood, CO
04.2017 - 05.2020
- Review and evaluate cost estimates
- Communicate with vendors and team members regarding new and current projects
- Prepare estimates and purchase orders in detail for all products
- Ensure timely completion of estimates
- Understand scope of work to bid
- Manage bid pricing from all vendors
- Establish and maintain working relationships with vendors and subcontractors
- Able to read blueprint plans and develop cost estimates Strong understanding of exhibit construction processes
- Proficiency with MS Word and Excel
- Able to multi-task and meet shifting deadlines
- Solid problem-solving skills
- Prepares work to be estimated by gathering proposals, blueprints, specifications, and related documents.
- Identifies labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents.
- Computes costs by analyzing labor, material, and time requirements.
- Resolves discrepancies by collecting and analyzing information. Presents prepared estimate by assembling and displaying numerical and descriptive information.
- Maintains cost data base by entering and backing up data.
- Contributes to team effort by accomplishing related results as needed.
- Prepared conceptual estimates based upon limited information available at the early stages of a project.
- Compiled data from suppliers to update material pricing databases as needed.
- Obtained quotes from vendors and subcontractors to make cost-effective selections.
- Analyzed blueprints and other documents to prepare time, cost and labor estimates.
- Collaborated with project managers and designers to identify cost-saving opportunities.
CNC Machinist
InterGlobal Exhibits
11.2012 - 04.2017
- Able to lift over 30-50lbs to prepare and load raw materials (plywood, acrylic, aluminum sheets) onto machine.
- Ability to read, interpret and follow basic blueprints, diagrams, specifications, and other written or verbal instructions to accurately plan out and set up and complete projects
- Utilized hand held tools such as a hand held screw and drill gun.
- Possessed a broad range of skills to be able to work anywhere in a shop/warehouse environment as needed.
- Learned and became proficient in using Enroute CAD CNC Software to program machine toolpaths and cuts and to draw and edit parts to be cut from raw materials.
- Performed proper setup and calibration procedures for machine equipment and accessories to be used on projects.
- Able to successfully set up, pre-program, and run production.
- Set machine to complete full cycles to fabricate large number of parts.
- Maintained equipment by performing maintenance; troubleshooting malfunctions; documenting and communicating actions, irregularities, and continuing needs.
- Inspected the work area and machines that were used during the day prior to leaving at the end of each shift
- Maintained a clean and safe work area.
- Performed all work in accordance with quality standards and established safety procedures.
- Monitor CNC machine operations to detect malfunctions or out-of-tolerance machining and adjust machine controls as necessary.
- Perform minor maintenance on the CNC machines such as replacing cutting tools or cleaning machinery parts.
- Calculate dimensions and tolerance using knowledge of mathematics and instruments such as micrometers or vernier calipers.
- Make adjustments to the machine feed rate, speed and depth of cut for each project.
- Changed out aging tools, fixtures and offsets.
- Measured, marked and indicated dimensions and reference points on materials.
- Inspected material after completion for accurate measurements of dimensions.
- Separated scrap waste and related materials for reuse or recycling.
Carpenter
InterGlobal Exhibits
Englewood, CO
06.2011 - 11.2012
- Follow blueprints and building plans to meet the needs of exhibit
- Prepared surfaces by sanding or scraping off old finishes prior to refinishing them.
- Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces.
- Maintained a clean job site at all times by disposing of debris properly after each shift.
- Used various carpenter's hand tools, portable power tools and standard measuring instruments.
- Measure, cut, or shape wood, plastic, and other materials
- Inspect and replace damaged properties
- Read blueprints, drawings and sketches to fully grasp requirements
- Take measurements and calculate the size and amount of material needed
- Cut, shape and sand lumber and other material according to measurements
- Operated hand tools such as saws, drills, sanders, routers. to fabricate parts accurately.
- Inspected materials before and after lamination process to ensure proper adhesion.
Sales Rep
Primerica
03.2011 - 06.2011
- Cold-called potential clients and recruits to discuss available financial products and services.
- Engaged in ongoing training and education to acquire knowledge of financial products and services.
- Interviewed prospective clients to obtain data about financial resources and needs.
- Sought out new clients and developed clientele by networking to find new customers.
- Explained coverage options to potential policyholders, answering questions or concerns.
- Educated clients on the importance of life insurance and financial planning.
- Participated in professional development opportunities to enhance insurance knowledge and sales skills.
- Pursued continued professional development through insurance workshops, and courses.
- Performed administrative tasks such as filing paperwork or updating databases.
Line Associate
Panera
06.2009 - 01.2011
- This is the place for a brief summary of your key responsibilities and most stellar accomplishments
- Prepared ingredients for menu items in accordance with recipes and standards.
- Cleaned and sanitized work areas, equipment, utensils, dishes, and silverware.
- Stocked and rotated ingredients from delivery area to storage, work areas, walk-in cooler.
- Maintained current knowledge of all menu items including preparation methods and ingredient content.
- Followed health safety guidelines for food preparation and service.
- Operated ovens, grills, fryers, steamers, broilers and other kitchen equipment according to standard procedures.
- Ensured proper portioning of cooked items as well as plate presentation.
- Adhered to company policies regarding food quality control processes such as temperature checks on all cooked foods.
- Monitored inventory levels of supplies needed for daily operations in the kitchen line cook station.
- Organized kitchen equipment for efficient use during peak hours of operation.
- Assisted in training new line cooks on duties related to their position within the kitchen staff hierarchy.
- Performed opening, closing duties including setting up, breaking down workstations.
- Maintained hygienic kitchen with regular mopping, disinfecting workspace and washing utensils and glassware.
- Kept stations stocked and ready for use to maximize productivity.
- Prepared dishes in fast-paced environment working with teammates to maintain high customer satisfaction rate.
- Set up and performed initial prep work for soups, sauces and salads.
- Helped other staff members complete job tasks during peak times to keep kitchen running efficiently.
- Monitored supply inventory and rotated stock to maintain optimal freshness and reduce waste.
- Operated kitchen equipment in alignment with OSHA protocols and manufacturer instructions.
Associate
Econo gas
10.2007 - 02.2009
- Greeted customers, answered questions and provided assistance with purchases.
- Maintained cleanliness of the store, including floors, shelves, counters and windows.
- Operated cash register to process customer transactions accurately and efficiently.
- Stocked shelves with merchandise and ensured that pricing was correct.
- Performed daily inventory checks on various products to ensure adequate stock levels.
- Monitored fuel pumps to ensure proper functioning and safety regulations were followed.
- Trained new employees on gas station operations, customer service, and safety procedures.
- Conducted regular cleaning and maintenance of gas station facilities to uphold safety standards.
- Maintained accurate financial records, including sales, expenses, and inventory reports.
- Implemented promotional sales strategies to increase revenue and customer satisfaction.
- Coordinated with fuel delivery trucks for timely refueling of gas station tanks.
- Updated pricing information on gas pumps and signage to reflect current rates.
- Reconciling cash registers at the end of each shift to ensure accuracy and proper accounting procedures.
- Managing financial transactions such as deposits, refunds, credits.
- Monitoring gas prices to ensure they remain competitive in the market.
- Implementing security measures such as surveillance cameras or alarm systems when necessary.
- Approving purchase orders for supplies required by the gas station's operations.
- Completed thorough opening, closing, and shift change functions to maintain operational standards each day.
- Used excellent verbal skills to engage customers in conversation and effectively determine needs and requirements.
Associate
Ross
09.2006 - 10.2007
- This is the place for a brief summary of your key responsibilities and most stellar accomplishments
- Helped customers locate items within the store using the inventory system.
- Operated equipment such as scanners and scales correctly during checkout process.
- Provided customer service support for inquiries, complaints, and returns.
- Trained new associates on store operations, policies, and procedures.
- Stocked shelves with merchandise and ensured product displays were neat and orderly.
- Built relationships with customers by providing friendly customer service.
- Organized store by returning merchandise to proper areas and restocked displays.
- Performed floor moves, merchandising, display maintenance and housekeeping to keep sales areas well-stocked, organized and current.
- Opened and closed cash registers by counting money, separating charge slips and balancing drawers.
- Maintained a neat and organized sales floor.
- Processed sales transactions using POS system and returned receipts and payment cards to customers.
- Assisted in training new sales associates, sharing knowledge and best practices for customer service.
- Handled customer queries and complaints with professionalism, working towards swift and satisfactory resolutions.
- Assisted customers with price checks, lifting heavy items and addressing other inquiries.
- De-escalated problematic customer concerns, maintaining calm, friendly demeanor.
- Remained calm and professional in stressful circumstances and effectively diffused tense situations.
Associate
McDonalds
02.2005 - 07.2006
- Computed purchases and received and processed cash or credit payment.
- Opened and closed cash registers by counting money, separating charge slips and balancing drawers.
- Cleaned shelves, counters and tables to maintain organized store.
- Built relationships with customers by providing friendly customer service.
- Ensured compliance with company safety regulations at all times while on the job.
- Maintained an up-to-date knowledge of store promotions, specials, events..
- Trained new associates on store operations, policies, and procedures.
- Prepared food items such as hamburgers, fries, sandwiches, salads. according to restaurant standards.
- Operated grills, deep fryers and griddles safely to avoid accidents or injury.
Education
GED -
Rangeview High School
Aurora, CO01-2007
Skills
- Multitasking and organization
- Proficient in MS office
- Project estimation and bidding
- Strong analytical and communication skills
- Equipment management
- Blueprint interpretation
- Critical thinking
- Cost estimation
- Tool maintenance
- Preparing estimates
- Verbal and written communication
- Multi year experience with and understanding of Enroute, V-Carve, CNC CAD software
- Vendor relations
- Carpentry skills
- Task prioritization
- Time management
- Problem-solving abilities
- Multitasking
- Adaptability
- Safety guidelines adherence
- Power tools operation
- Warehouse safety
Timeline
Carpenter /CNC Machinist
Proctor Productions
08.2021 - 11.2024
CNC Machinist
Closet Factory
09.2020 - 08.2021
Estimator
InterGlobal Exhibits
04.2017 - 05.2020
CNC Machinist
InterGlobal Exhibits
11.2012 - 04.2017
Carpenter
InterGlobal Exhibits
06.2011 - 11.2012
Sales Rep
Primerica
03.2011 - 06.2011
Line Associate
Panera
06.2009 - 01.2011
Associate
Econo gas
10.2007 - 02.2009
Associate
Ross
09.2006 - 10.2007
Associate
McDonalds
02.2005 - 07.2006
GED -
Rangeview High School