AMILCAR ARANCIVIA
4718 Schield Ct, Plant City,FL
Summary
Enthusiastic Ironworker eager to contribute to team success through hard work, attention to detail and excellent organizational skills. Clear understanding of performance excellence in quality work and fabricating additional or existing parts and training in becoming a more productive & successful craftsman. Motivated to learn, grow and excel in Industrial construction.
Overview
12
12
years of professional experience
1
1
Certification
Work History
Journeyman Ironworker
ILS
05.2023 - Current
- Enhanced structural integrity by; pluming, anchoring and bolting/impacting iron components before final product.
- Ensured project safety through diligent inspection of equipment checklist to meet safety protocols.
- Modify ducting with metabo & cutting torch before rigging it & flying it into correct elevation.
- Maintained high-quality workmanship through precise cutting, fitting, and aligning of steel components.
- Use 9k Lull/JLG to transport materials from lay-down yard or use to lift pieces into place.
Journeyman Ironworker/Multi-Craft
Cianbro
08.2021 - 02.2023
- Review safe work plans/hazards assessment with crew prior to job commencement
- Cut steel members using acetylene torch equipment
- Set up hoisting equipment, raising & placing structural-steel members, with basic rigging knowledge for raising & placing structural steel members into place
- Signaled crane operator/ fork-lift into lifting & placing steel members or other objects into position
- Install & tie rebar by specifications according to the blue prints.
- Use carpentry tools to build forms for concrete plus drill & install compass crews using Hilti TE-70 hammer drill
- Pour concrete & use vibrator for equally distributed areas then leveling it out with float to match crane rails specifications
- Made vertical & overhead repairs in tunnel using concrete/grout plus hand tools.
Journeyman Ironworker
APTIM
10.2020 - 07.2021
- Follow safe work practices, which included fall protection and personal protective equipment when working at heights.
- Fabricated, assembled & installed pipe supports
- Cut and drilled holes using mag-drill to complete RFI job task
- Read and interpreted blueprints to determine elevation & coordinates for supports
- Use: Grinders, Metabo, Sawzall & acetylene torch to prep to fabricate supports
- Connect, bolt-up, plumb columns / beams before using pneumatic gun or torque ratchet
- Supervise my apprentice and offered specific recommendations to improve work quality & efficiency.
Journeyman Ironworker
McDermott
09.2019 - 06.2020
- Cut steel members using acetylene equipment
- Interpret blueprints & specifications to perform layout
- Installed: railings, stairways & other structural metalwork into position
- Bolt-up, impact, install & align sag rods plus plumb columns
- Planned work & select proper tools for task
- Set up hoisting equipment, raising & placing structural steel with basic rigging practices for raising & placing structural steel
Journeyman Ironworker
Phoenix Industrial
06.2019 - 09.2019
- Inspect worksite/area before, during & at end of shift
- Lifting, positioning & securing of security of material & work pieces during installation
- Signaled worker operating hoisting equipment to lift & place steel members into place
- Set up hoisting equipment, raising & placing structural-steel members, with basic rigging knowledge for raising & placing structural steel members/pipe into place
- Fabricator for: grating, toe-plates, support for grating & handrails
- Bolt-up & impact plate-forms then use crane to fly structure into place
Journeyman Ironworker
McDermott
01.2019 - 06.2019
- Install railings, stairways & other structural metalwork into position
- Perform accurate measurements & cut steel bars accordingly
- Verify vertical & horizontal alignment of members using plumb bob & level/laser
- Ensure that all work permits are obtained & adhered to
- Set-up hoisting equipment, raising & placing structural steel members, with basic rigging knowledge for raising & placing structural steel members into place
- Bolt-up , impact , install & align sag rods plus plumb columns
- Review safe work plans/hazard assessment with crew prior to job commencement
- Inspect worksite/area before, during & at end of shift
Journeyman Ironworker
Wood Group
07.2018 - 11.2018
- Forced members into final position, using turnbuckles, crowbars, jacks, hand tools, come-a-longs & chainfalls & placing structural steel members/pipe into place
- Forced members into final position, using turnbuckles, crowbars, jacks, hand tools, come along & chainfalls.
- Performed accurate measurements & cut angle iron/C- channels to fabricate pipe supports
- Signaled crane operator hoisting equipment/material to lift & place steel members or pipe into place then use rigging to steal it from crane.
- Aligned bolt holes in steel members using drift pins or spud wrenches
- Planned work and select proper tools
Ironworker Journeyman
Fluor
01.2017 - 07.2018
- Set up hoisting equipment, raising & placing structural-steel members, with basic rigging knowledge for raising & placing structural steel members.
- Reviewed safe work plans/hazard assessment with crew prior to job commencement
- Performed accurate measurements & cut steel bars accordingly.
- Read blue prints & specifications to layout the work
- Forced members into final position, using turnbuckles, crowbars, jacks & hand tools
- Performed equipment inspection to ensure adherence to safety standards Verified vertical & horizontal alignment of members using plumb bob & level/laser.
Journeyman Ironworker
Overland Contractors, Inc
05.2016 - 09.2016
- Bolt-up, impact, plumb column
- Followed given timetables & respected deadlines
- Aligned bolt holes in steel members using drift pins or spud wrenches
- Pulled, pushed & pried member into approximate position while member was supported by hoisting device.
- Planned work and select proper tools before fabricating handrails/gratting
- Assembled rigging (cables, pulleys, hooks) to move heavy equipment & materials.
- Installed: railings, stairways & other structural metalwork into position.
- Set up hoisting equipment, raising & placing structural-steel members, with basic rigging knowledge for raising & placing structural steel members into place
Journeyman Ironworker
Robins & Morton
01.2015 - 04.2016
- Review safe work plans/hazards assessment with crew prior to job commencement.
- Position steel units, align holes & insert temporary bolts
- Forced members into final position, using turnbuckles, crowbars, jacks & hand tools
- Installed railings, stairways & other structural metalwork into position
- Performed equipment inspection to ensure adherence to safety standards
- Signaled crane operator into lifting & placing steel members
Journeyman Apprentice
Mid-State Construction & Maintenance
02.2012 - 01.2015
- Ensure that all work permits were obtained & adhered to
- Inspect worksite before, during & at end of shift
- Assisted in lifting, positioning & securing of security of material & work pieces during installation.
- Work with drift pins to align holes in steel with framework holes
- Comprehend safe work practice/lifting techniques & the knowledge to safety operate the tools of the trade
- Interpret blueprints & specifications to layout the work
- Signaled worker operating hoisting equipment to lift & place steel members into place
- Operate aerial lifts
- Work at heights above 300 Ft
Skills
- Attention to details
- Work cooperatively with others
- Able to interpret blueprints & schematic
- Job Planning and Coordination
- Maintenance & Repair
- Metal decking installation
- Column connecting/Plumbing
- Safety protocols and procedures
- Oxylance torch & Acetylene torch proficient
- Steel fabrication
Certification
- OSHA-10
- OSHA Aerial lift certified
- TWIC card
- Basic Plus
Timeline
Journeyman Ironworker
ILS
05.2023 - Current
Journeyman Ironworker/Multi-Craft
Cianbro
08.2021 - 02.2023
Journeyman Ironworker
APTIM
10.2020 - 07.2021
Journeyman Ironworker
McDermott
09.2019 - 06.2020
Journeyman Ironworker
Phoenix Industrial
06.2019 - 09.2019
Journeyman Ironworker
McDermott
01.2019 - 06.2019
Journeyman Ironworker
Wood Group
07.2018 - 11.2018
Ironworker Journeyman
Fluor
01.2017 - 07.2018
Journeyman Ironworker
Overland Contractors, Inc
05.2016 - 09.2016
Journeyman Ironworker
Robins & Morton
01.2015 - 04.2016
Journeyman Apprentice
Mid-State Construction & Maintenance
02.2012 - 01.2015
Similar Profiles
Charles WamaeCharles Wamae
DSP at ILSDSP at ILS
Bernice AndersonBernice Anderson
Driver at ILSDriver at ILS
Kimberly NikolichKimberly Nikolich
Customer Success Representative at ILSCustomer Success Representative at ILS
Francisco BurdierFrancisco Burdier
Insurance Agent at Delta DentalInsurance Agent at Delta Dental
Marc ZeffMarc Zeff
Controller at Peace River Packing CompanyController at Peace River Packing Company