Summary
Overview
Work History
Education
Skills
Languages
Timeline
Generic

Andres Covarrubio

Lake Jackson,TX

Summary

Accomplished Pipefitter with extensive experience at Repcon Industrial Turnaround, recognized for achieving zero leaks on installations through meticulous pressure testing and effective collaboration. Skilled in blueprint interpretation and safety procedures, I consistently optimize material usage, enhancing project efficiency while fostering a strong team environment.

Overview

6
6
years of professional experience

Work History

Pipefitter

Repcon Industrial Turnaround
09.2024 - 03.2025
  • Continuously expanded knowledge of industry best practices through participation in professional development courses and workshops.
  • Achieved zero leaks on completed installations, meticulously testing and adjusting systems as needed.
  • Inspected sewers and piping systems to assess quality and condition.
  • Reduced material waste by accurately measuring and planning pipe routes, contributing to cost savings.
  • Conducted comprehensive pressure tests to ensure integrity of piping systems, enhancing system reliability.
  • Increased system longevity with selection and installation of appropriate pipe supports and insulation materials.
  • Planned pipe system layout, installation and repair according to specifications.
  • Filled pipe systems with water and air to determine location of leaks.
  • Collaborated effectively with supervisors to ensure that all necessary permits were obtained before commencing work on new projects.
  • Optimized workflow by organizing tools and materials beforehand, setting stage for efficient task execution.
  • Enhanced safety on job sites by strictly adhering to OSHA regulations and conducting regular safety audits.
  • Measured, threaded, and cut materials to correct angles.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Used clamps and brackets to attach pipes to walls, structures, and fixtures.
  • Demonstrated versatility in skillset by working with various types of pipes such as PVC, copper, steel, cast iron among others.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Contributed to successful project outcomes by working closely with plumbers, steamfitters, and welders on diverse job sites.
  • Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
  • Maintained high-quality standards through consistent attention to detail while fitting pipes according to building code requirements.
  • Improved workflow with efficient pipe system modifications, including cutting, threading, welding, and soldering components as needed.
  • Consistently met client expectations through timely completion of projects while maintaining high levels of quality control checks throughout the process.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Supported team efficiency through clear communication regarding progress updates and potential issues during the course of projects.
  • Cut and threaded pipe to specifications, ensuring seamless integration into existing systems for increased efficiency.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Threaded pipes using piping machines.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.

Pipefitter

Kiwitt Shipyard
05.2024 - 09.2024
  • Improved project completion times by coordinating effectively with other tradespeople on large-scale industrial projects.
  • Delivered custom fabrication projects within tight deadlines, utilizing precise cutting and welding techniques to meet specific requirements.
  • Reduced material waste by accurately measuring and planning pipe routes, contributing to cost savings.
  • Enhanced team performance with strong leadership in collaborative projects, setting clear goals and expectations.
  • Collaborated effectively with supervisors to ensure that all necessary permits were obtained before commencing work on new projects.
  • Optimized workflow by organizing tools and materials beforehand, setting stage for efficient task execution.
  • Enhanced safety on job sites by strictly adhering to OSHA regulations and conducting regular safety audits.
  • Measured, threaded, and cut materials to correct angles.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Used clamps and brackets to attach pipes to walls, structures, and fixtures.
  • Demonstrated versatility in skillset by working with various types of pipes such as PVC, copper, steel, cast iron among others.
  • Contributed to successful project outcomes by working closely with plumbers, steamfitters, and welders on diverse job sites.
  • Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
  • Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Threaded pipes using piping machines.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.

Pipefitter

ICS Industrial Maintenance
02.2024 - 06.2024
  • Delivered custom fabrication projects within tight deadlines, utilizing precise cutting and welding techniques to meet specific requirements.
  • Reduced material waste by accurately measuring and planning pipe routes, contributing to cost savings.
  • Enhanced team performance with strong leadership in collaborative projects, setting clear goals and expectations.
  • Conducted comprehensive pressure tests to ensure integrity of piping systems, enhancing system reliability.
  • Increased system longevity with selection and installation of appropriate pipe supports and insulation materials.
  • Optimized pipe system designs for energy efficiency, contributing to sustainability goals and operational savings.
  • Planned pipe system layout, installation and repair according to specifications.
  • Filled pipe systems with water and air to determine location of leaks.
  • Reviewed blueprints and project specifications to determine correct plumbing solutions.
  • Optimized workflow by organizing tools and materials beforehand, setting stage for efficient task execution.
  • Enhanced safety on job sites by strictly adhering to OSHA regulations and conducting regular safety audits.
  • Measured, threaded, and cut materials to correct angles.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Reduced project completion time by interpreting blueprints, sketches, and specifications to accurately plan pipefitting installations.
  • Assisted in achieving project deadlines through effective organization of work assignments and prioritization of tasks based on urgency.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Used clamps and brackets to attach pipes to walls, structures, and fixtures.
  • Demonstrated versatility in skillset by working with various types of pipes such as PVC, copper, steel, cast iron among others.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Contributed to successful project outcomes by working closely with plumbers, steamfitters, and welders on diverse job sites.
  • Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
  • Maintained high-quality standards through consistent attention to detail while fitting pipes according to building code requirements.
  • Supported team efficiency through clear communication regarding progress updates and potential issues during the course of projects.
  • Cut and threaded pipe to specifications, ensuring seamless integration into existing systems for increased efficiency.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.

Pipefitter

Custofab
10.2023 - 01.2024
  • Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Threaded pipes using piping machines.
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Increased efficiency by collaborating with team members to install, assemble and repair piping systems in various construction projects.
  • Optimized material usage by accurately measuring and calculating required materials for each project, minimizing waste.
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Enhanced safety by conducting regular inspections of tools and equipment, ensuring proper maintenance and functionality.
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Facilitated smooth project execution by interpreting isometric drawings for accurate installation or modification of piping systems.
  • Cut and threaded pipe to specifications, ensuring seamless integration into existing systems for increased efficiency.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Supported team efficiency through clear communication regarding progress updates and potential issues during the course of projects.
  • Maintained high-quality standards through consistent attention to detail while fitting pipes according to building code requirements.
  • Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
  • Demonstrated versatility in skillset by working with various types of pipes such as PVC, copper, steel, cast iron among others.

Pipefitter

Hime System
07.2023 - 10.2023
  • Collaborated effectively with supervisors to ensure that all necessary permits were obtained before commencing work on new projects.
  • Optimized workflow by organizing tools and materials beforehand, setting stage for efficient task execution.
  • Enhanced safety on job sites by strictly adhering to OSHA regulations and conducting regular safety audits.
  • Measured, threaded, and cut materials to correct angles.
  • Fabricated piping pieces and components in line with design specifications for each system.
  • Used clamps and brackets to attach pipes to walls, structures, and fixtures.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.

Pipefitter

Wood Group
03.2023 - 07.2023
  • Performed tests to check quality of pipe and piping systems and make adjustments as necessary.
  • Reduced project completion time by interpreting blueprints, sketches, and specifications to accurately plan pipefitting installations.
  • Assisted in achieving project deadlines through effective organization of work assignments and prioritization of tasks based on urgency.
  • Inspected and tested existing pipe systems to identify system defects and malfunctions.
  • Eliminated risks by correctly identifying potential safety hazards.
  • Cut and drilled holes in walls to permit passage of pipes.
  • Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
  • Interpreted blueprints to determine locations, quantities, and sizes of materials required.
  • Operated drill motors, grinders, chop saws, hack saws, and burning torches to perform tasks.
  • Used clamps and brackets to attach pipes to walls, structures, and fixtures.

Pipefitter

CustOFab
03.2023 - 06.2023
  • Demonstrated versatility in skillset by working with various types of pipes such as PVC, copper, steel, cast iron among others.
  • Replaced faulty parts and repaired structural damages to pipes and related components.
  • Contributed to successful project outcomes by working closely with plumbers, steamfitters, and welders on diverse job sites.
  • Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
  • Maintained high-quality standards through consistent attention to detail while fitting pipes according to building code requirements.
  • Improved workflow with efficient pipe system modifications, including cutting, threading, welding, and soldering components as needed.
  • Consistently met client expectations through timely completion of projects while maintaining high levels of quality control checks throughout the process.
  • Appropriately fitted pipes by identifying dimensions, sizes, and shapes needed to replace faulty pipes.
  • Supported team efficiency through clear communication regarding progress updates and potential issues during the course of projects.
  • Connected piping systems to water heaters, boilers, pumps and auxillary equipment to complete installations.
  • Performed preventive maintenance to clean, adjust and lubricate piping systems and parts.
  • Cut and threaded pipe to specifications, ensuring seamless integration into existing systems for increased efficiency.

Pipefitter

Cajun Constructors Inc.
01.2023 - 03.2023
  • Installed new systems and connected piping to existing components by welding, bolting and threading.
  • Facilitated smooth project execution by interpreting isometric drawings for accurate installation or modification of piping systems.
  • Enhanced safety by conducting regular inspections of tools and equipment, ensuring proper maintenance and functionality.
  • Contributed to overall company success by maintaining a strong work ethic, adaptability, and commitment to delivering exceptional service on all projects undertaken.
  • Fabricated and installed screw pipe, socket weld pipe, and stainless steel tubing.
  • Utilized specialized tools and equipment for precise pipefitting processes, ensuring optimal results for each project.
  • Optimized material usage by accurately measuring and calculating required materials for each project, minimizing waste.
  • Increased efficiency by collaborating with team members to install, assemble and repair piping systems in various construction projects.

Pipefitter Journeyman

Hawk Installation and Construction
10.2022 - 01.2023

Welder Fabricator

Tres Costas Construction
06.2021 - 10.2021
  • Welded in flat, horizontal, vertical, and overhead positions.
  • Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
  • Fabricated shop parts directly from blueprints.
  • Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
  • Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.

Pipefitter and Structure Welder

JTH Industrial
01.2021 - 06.2021
  • Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
  • Threaded pipes using piping machines.
  • Followed safe work practices, which included fall protection and personal protective equipment.
  • Read and interpreted blueprints, diagrams and other technical drawings to determine best installation methods.
  • Fabricated pipe sections and components to specification using cutting, threading and welding equipment.
  • Promoted a safe work environment by adhering to company safety policies and procedures at all times during pipefitting operations.

Pipefitter Journeyman

Allegiant Industrial
01.2019 - 12.2020
  • Improved project efficiency by interpreting and analyzing complex blueprints, ensuring accurate pipe system installations.
  • Collaborated proactively with other construction trades such as electricians and HVAC technicians to coordinate tasks efficiently during joint projects.
  • Exceeded expectations in meeting strict deadlines without compromising on the quality of workmanship or safety standards followed onsite.
  • Maximized production quality through precise measurements and cuts for optimal pipe fitting results.
  • Assisted in conducting pressure tests to ensure proper functionality of newly installed pipe systems before finalizing a project''s completion.
  • Contributed to successful project completion by assembling prefabricated sections according to specifications provided in blueprints.

Education

Lubbock High School
Lubbock, TX
05.2003

Skills

  • Pipe measuring
  • Safety procedures
  • Blueprints and specifications
  • Pipefitting
  • Material cutting
  • Installation and maintenance
  • Pipe hanger installation
  • Flange assembly
  • Pipe threading
  • Pressure testing
  • Welding
  • Pipe support design
  • Hand and power tools

Languages

English And Spanish
Professional Working

Timeline

Pipefitter

Repcon Industrial Turnaround
09.2024 - 03.2025

Pipefitter

Kiwitt Shipyard
05.2024 - 09.2024

Pipefitter

ICS Industrial Maintenance
02.2024 - 06.2024

Pipefitter

Custofab
10.2023 - 01.2024

Pipefitter

Hime System
07.2023 - 10.2023

Pipefitter

Wood Group
03.2023 - 07.2023

Pipefitter

CustOFab
03.2023 - 06.2023

Pipefitter

Cajun Constructors Inc.
01.2023 - 03.2023

Pipefitter Journeyman

Hawk Installation and Construction
10.2022 - 01.2023

Welder Fabricator

Tres Costas Construction
06.2021 - 10.2021

Pipefitter and Structure Welder

JTH Industrial
01.2021 - 06.2021

Pipefitter Journeyman

Allegiant Industrial
01.2019 - 12.2020

Lubbock High School

Similar Profiles

CREATE PROFILE
Andres Covarrubio