Angie Jent
Phenix City,AL
Summary
Professional with 15 years of experience in manufacturing. Individual who is safety and quality oriented, committed to getting the job completed. Seeking a challenging opportunity with an organization to focus in achieving the organization's goals and objectives; in a reputable organization to expand my learnings, knowledge, and skills.
Overview
16
16
years of professional experience
Work History
Composite Technician
Hanwha Cimarron
Opelika, AL
08.2022 - Current
- Assure the process of composite filament, a wrapping pressure vessel and finishing winding machine process, the hoist and curing oven
- Ability to setup and tear down production equipment associated with filament wind processing, and validate quality of winding process and adjust as necessary
- Ability to setup and feed raw fiber and wet resin systems in compliance to winding requirements
- Ability to use templates and other basic measuring equipment
- Read and interpret process control plans in order to set up, operate and troubleshoot filament winding/ other composite manufacturing equipment for tubes and cylinders
- Ability to use tape measurement and measure the fiberglass sheets width and length.
- Performed composite layups and cured components with autoclave, ovens, and vacuum bagging techniques.
- Fabricated molds and tooling for composites parts using a variety of materials.
- Inspected parts throughout production process to ensure quality standards were met.
- Assisted in troubleshooting during development of new products or processes.
- Documented test results from inspection activities conducted on finished products.
- Maintained equipment to ensure proper functioning of the composite shop.
- Trained other technicians on proper handling of composite materials and tools used in fabrication process.
- Repaired damaged components by applying structural adhesive bonding techniques as well as mechanical fastening methods such as riveting, bolting, and screwing.
- Researched new materials and technologies related to composites manufacturing processes.
- Created detailed documentation for all work performed in accordance with company policy and procedures.
Machine Operator
Vectorply Corporate
Phenix City, AL
12.2020 - 08.2022
- Perform tasks and duties as trained that will allow for the safe and efficient operation of the manufacturing equipment to which assignment is made
- Inspection of materials to ensure accuracy
- Loading raw materials into the manufacturing machines
- Monitoring of the manufacturing process to prioritize the areas needing materials
- Assisting machine operators in repairing causes of machinery stops and re-starting the machine
- Removing and packaging finished product from the manufacturing equipment
- Maintaining accurate records of pertinent information
- General housekeeping duties.
- Set up and operate machine tools to produce precision parts and instruments.
- Monitor the feed and speed of machines during the machining process.
- Check products for accuracy using measuring instruments such as calipers, micrometers, gauges.
- Adjust machine settings to complete tasks accurately.
- Inspect finished workpieces to ensure conformance with specifications.
Utility Worker
Hostess
Columbus, GA
08.2020 - 10.2020
- Operate and monitor continuous production line
- Rotates among duties including the wrapping products, packing boxes, stacking boxes
- Visually inspects product for quality and quantity
- Reports all equipment issues to the supervisor or manager in a timely manner
- Understands and complies with all safety procedures that apply to daily operations
- Maintains a safe and clean environment by adhering to safety policy and procedures.
- Prepared reports summarizing daily activities related to utility operations.
- Provided technical assistance to other departments regarding utility systems issues.
- Inspected and repaired electrical, mechanical, hydraulic, and pneumatic systems.
- Performed preventive maintenance on utility system components.
- Responded to emergency situations as needed.
- Operated various types of power tools safely and efficiently to make repairs or adjustments.
- Troubleshot problems in the field by performing tests on equipment and making necessary adjustments.
- Ensured compliance with applicable laws and regulations governing utilities operations.
- Assisted with installation of new equipment or modifications to existing systems.
- Monitored utility system performance using computerized control systems.
- Managed inventory of materials required for repair and maintenance activities.
Machine Operator
Kelly Service
Columbus, GA
01.2019 - 04.2020
- Responsible for the set up and operation of process equipment in an assigned area
- Move and operate basic machine tools to repair, make minor alterations
- Service and repair equipment associated with the area where problems are identified
- Perform administrative tasks such as the completion and status of work in process
- Place orders for tools and supplies
- Operates power-assisted machinery to assemble components (caps, lining and spouts)
- Set up, operate and perform work where methods, procedures and processes are well-developed and the required tooling, gauging and machine are provided.
- Set up and operate machine tools to produce precision parts and instruments.
- Monitor the feed and speed of machines during the machining process.
- Check products for accuracy using measuring instruments such as calipers, micrometers, gauges.
- Adjust machine settings to complete tasks accurately.
- Inspect finished workpieces to ensure conformance with specifications.
- Load raw materials into machines according to specified measurements.
- Unload finished products from machines onto conveyors or other transport systems.
Subject Matter Expert
NCR
Columbus, GA
07.2012 - 12.2018
- Responsible for the assembly of units
- Recognized any minor issues and took appropriate corrective actions
- Ensured any safety equipment for electrical components were working correctly for operations
- Uploaded software Self-serve checkout for ATMs and self-checkouts machine
- Assembled equipment for the production line and substations.
- Mentored junior staff members on best practices related to product design and implementation strategies.
- Managed customer inquiries with a focus on providing timely resolutions while maintaining excellent customer service levels.
- Provided subject matter expertise and guidance to cross-functional teams in the development of new products.
- Drafted technical documents, such as user manuals and training materials, to ensure accuracy of content.
- Conducted market research and analysis to identify industry trends and customer requirements.
- Developed comprehensive test plans for software applications and hardware components to ensure quality assurance standards were met.
Data Collector
Alatrade
Phenix City, AL
04.2008 - 12.2008
- Responsible for measuring the chicken tenders and packet's weight for outgoing shipments
- Filled in on the production line as needed, and continued to help improving quality services
- Provided a total level of commitment to working safely and following all safety rules and regulations
- Ensured production areas were clean and debris was removed
- Safely completed start up and shut down of assigned equipment.
- Collected, compiled, and analyzed data from multiple sources to create detailed reports.
- Performed data entry operations using various software applications.
- Worked with other departments to identify opportunities for improving the accuracy of collected information.
- Verified the accuracy of entered information before it was included in a report or database.
Education
Columbus Technical College
01.2020
Continental Academy
Skills
- Knowledge of production/assembly procedures
- Equipment operation
- Customer focused
- Safety oriented
- Bilingual (English-Spanish)
- Team player
- Flexibility
- Team Leader/Inspector
- Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)
- 60 WPM typing
- SAP
- Oracle
- ERP
- Midas
- Safety processes
- Testing equipment
- Hand tools
- Health and safety compliance
- Testing and diagnostics
- Self Motivation
- Worksite safety
- Active Listening
- Team building
- Problem-solving aptitude
- Time Management
- Excellent Communication
- Reliability
- Goal Setting
Tel
706-992-7324
Skills Proficiencies
- Knowledge of production/assembly procedures
- Equipment operation
- Customer focused
- Safety oriented
- Bilingual (English-Spanish)
- Team player
- Flexibility
- Team Leader/Inspector
- Microsoft Office Suite (to include: Word, Excel, PowerPoint, Outlook / 60+ WPM typing /SAP/Oracle/ERP/Midas
Timeline
Composite Technician
Hanwha Cimarron
08.2022 - Current
Machine Operator
Vectorply Corporate
12.2020 - 08.2022
Utility Worker
Hostess
08.2020 - 10.2020
Machine Operator
Kelly Service
01.2019 - 04.2020
Subject Matter Expert
NCR
07.2012 - 12.2018
Data Collector
Alatrade
04.2008 - 12.2008
Columbus Technical College
Continental Academy
Similar Profiles
Sonjia CoreSonjia Core
COMPOSITE TECH at HANWHA CIMARRONCOMPOSITE TECH at HANWHA CIMARRON
Bailee BuehlerBailee Buehler
Lifeguard at City of CimarronLifeguard at City of Cimarron
Raeslyn MillerRaeslyn Miller
Student Teacher at Mustang High School, Cimarron Middle SchoolStudent Teacher at Mustang High School, Cimarron Middle School