Anthony Smith
Milledgeville,Georgia
Overview
3
3
years of professional experience
Work History
Pipe Layer
SnowCo General Contractors
McIntyre, GA
01.2024 - Current
- Assisted in the excavation of trenches for pipe laying.
- Laid out and marked underground pipe routes to ensure accuracy of installation.
- Installed pipes using hand tools, power tools and heavy machinery.
- Connected pipes with fittings such as elbows, tees, couplings, valves and clamps.
- Ensured proper alignment of pipes by shimming or packing material around them.
- Inspected existing pipeline systems for defects and malfunctions.
- Measured distances between points to determine the length of pipe needed for a job.
- Performed backfilling operations after completing piping installations.
- Analyzed blueprints and technical documents prior to starting construction projects.
- Cleaned debris from worksites following completion of tasks.
- Assembled prefabricated parts such as chambers, manholes, catch basins.
- Used measuring instruments like levels, transits and laser devices for accurate positioning of pipes.
- Operated heavy machinery including tractors, bulldozers and loaders safely at worksites.
- Tested newly constructed pipelines for leaks before commissioning them into service.
- Collaborated with team members in order to ensure successful completion of tasks.
- Handled assembly and installation of underground piping, fittings and valves for storm drains and water mains.
- Repaired sanitary and storm water sewer structures and pipe systems.
- Graded and leveled trench bases using tamping machines and hand tools.
- Operated rollers, front-end loaders and backhoes for site work.
- Backfilled excavated locations after completion of work to protect piping and prepare for final grading.
- Located underground utilities in preparation for digging and marked locations to prevent damage.
- Put in new fire hydrants, gate valves and fire lines to support city requirements.
- Followed written instructions, schematics and blueprints to lay out pipe in correct arrangements.
Oil and Lube Technician
Childre Nissan
Milledgeville, GA
08.2023 - 01.2024
- Performed oil and filter changes on a variety of vehicles, including cars, trucks, buses, and heavy equipment.
- Inspected vehicle fluids levels and topped off as necessary.
- Checked air filters, spark plugs, belts, brakes, and other components to ensure they were in good condition.
- Repaired or replaced worn out parts such as brake pads, hoses, gaskets, shocks and struts.
- Performed routine maintenance services such as tire rotation and balancing.
- Diagnosed mechanical problems using computerized diagnostic equipment.
- Tested batteries for proper voltage output with electronic testers.
- Replaced faulty exhaust systems and mufflers according to manufacturer specifications.
- Drained used motor oils from engines and replaced with new oil types based on customer needs.
- Inspected drive trains for wear or damage due to road conditions or improper maintenance practices.
- Installed accessories such as stereos or running boards according to customer requests.
- Operated hoists safely while raising vehicles off the ground for repairs or inspections.
- Provided customers with estimates of repair costs prior to commencing any work.
- Communicated effectively with customers regarding the status of their vehicles' repairs.
- Documented work performed on repair orders, submitting reports to supervisor for implementation into corporate system.
- Changed oil, transmission fluid and filters in vehicles.
- Kept shop area neat and clean by removing debris and safely disposing of used oil.
- Replaced cabin, fuel, air and oil filters and tested vehicle horn and lights.
- Maintained tools, test equipment and materials, keeping work areas organized.
- Adjusted tire pressure on vehicles and warned customers of leaks and tire damage.
- Checked fluids and maintenance-related parts and topped off or replaced.
- Checked tire pressure and performed tire repairs, installations and maintenance tasks.
- Rebuilt engines when needed by replacing pistons, valves or bearings as required.
- Rotated tires and checked brakes on vehicles.
- Performed maintenance inspections, tune-ups, oil changes and other key services.
- Conducted test drives before and after repair services.
- Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
- Tested components and systems using infrared engine analyzers, compression gauges and computerized diagnostic devices.
- Aligned wheels using special alignment equipment and wheel-balancing machines.
- Conferred with customers to obtain descriptions of vehicle problems and discuss work or future repair requirements.
- Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
Carpenter
Premier Home Services LLC
Milledgeville, GA
01.2021 - 08.2023
- Measured, cut and shaped wood materials to specifications using hand tools, such as saws and chisels.
- Installed cabinets, fixtures and trim according to plans and blueprints.
- Fabricated staircases, doors, window frames and other wooden components for buildings.
- Assembled furniture using glue, dowels, screws and nails.
- Repaired or replaced damaged structures or components.
- Constructed forms for concrete pours in accordance with building codes.
- Fitted door locksets, deadbolts and other hardware on doors according to manufacturer's instructions.
- Installed drywall sheets onto walls or ceilings using nails or screws.
- Prepared surfaces by sanding or scraping off old finishes prior to refinishing them.
- Installed interior trim work such as baseboards and moldings around windows and doors.
- Cut countertops from laminated material following template measurements.
- Laid out flooring patterns according to design templates or customer specifications.
- Inspected completed projects for quality assurance purposes before delivering them to customers.
- Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces.
- Maintained a clean job site at all times by disposing of debris properly after each shift.
- Calculated material costs for projects based on labor estimates provided by clients.
- Performed routine maintenance on carpentry equipment such as saws and drills.
- Provided consultation services for homeowners regarding custom carpentry designs.
- Cut timber, panels and other wooden materials according to measured dimensions.
- Shaped or cut materials to proper measurements using hand tools, machines or power saws.
- Used various carpenter's hand tools, portable power tools and standard measuring instruments.
- Used band, circular and compound miter saws.
- Installed building windows, trim and cabinetry alone or with assistants to meet job deadlines.
- Cut and installed tile and hardwood flooring for residential and commercial buildings.
- Prioritized work, keeping carpentry jobs on task and within budget.
- Measured, cut and installed staircase spindles.
Education
High School Diploma -
Discovery K-12
Milledgeville, GA05-2023
Skills
- Heavy Lifting
- Heavy Equipment Operation
- Water and sewer piping
- Leak detection
- Pipe installation
- Pipe cutting
- Pressure testing
- Multitasking
- Analytical Skills
- Analytical Thinking
- Attention to Detail
- Teamwork and Collaboration
- Problem-Solving
- Equipment Maintenance
- Professionalism
- Structural Repairs
- Basic electrical knowledge
- Flooring Installation
- Flooring construction
- Hand and power tools
- Blueprint Reading
- Valid Georgia driver's license
- Measuring and Cutting
- Window Installation
- Finish Carpentry
- Worksite safety
- Drywall Installation
- PPE use
- Mechanical Aptitude
- Vehicle Inspection
- Bay maintenance
- Automotive Lift Operation
- Preventive Maintenance
- Tire Changing and Rotation
- Transmission service
- Filter Replacement
- Battery Installation
- Coolant flushes
- Gasket replacements
- Safety Checks
- Inspecting vehicles
- Brakes Replacement
- Tire Rotations
- Problem-solving capabilities
- Mechanical Troubleshooting
- Tire Damage Repair
- Documentation skills
- Power Tools
- Oil Changes
Timeline
Pipe Layer
SnowCo General Contractors
01.2024 - Current
Oil and Lube Technician
Childre Nissan
08.2023 - 01.2024
Carpenter
Premier Home Services LLC
01.2021 - 08.2023
High School Diploma -
Discovery K-12