Antonio Lozano Jr
Pharr
Summary
Skilled Journeyman Electrician with a robust background in high and low voltage terminations, demonstrated in any team and other leading company. Proficient in blueprint reading and wire management, complemented by effective leadership and communication abilities. Proven track record of enhancing safety and efficiency, with a commitment to continuous learning and adaptability.
Overview
9
9
years of professional experience
Work History
Journeyman Electrician Unlc
BHI Energy
06.2024 - 11.2024
- Worked around TESLA batteries
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- LV terminations
- Pulled MV cable
- Stored and maintained power tools and equipment for each job.
- 900 KCMIL crimps/terminations using BURNDY hydraulic crimper
- Installed ground grid and grounded fence
- Cat 6 terminations
Journeyman Electrician
MMR
10.2023 - 11.2023
- Industrial Shutdown Job
- Interpreted blueprints, schematics, and diagrams of project requirements and initiated appropriate electrical installations.
- High Voltage / Low Voltage Terminations
- Repaired and installed new fixtures, wiring, circuits, and motors.
- Heat tracing
- Diagnosed issues and developed effective solutions.
- Wire management
Journeyman Electrician Unlc
Gridworks
05.2023 - 06.2023
- BESS
- Installed cable tray raceways
- Completed rough-in, termination, and underground work.
- Crew lead men guiding with quality and safety
- Interpreted blueprints, schematics, and diagrams of project requirements and initiated appropriate electrical installations.
- Read technical drawings, diagrams and project documentation to make accurate decisions about electrical system installations and repair work.
- Repaired and installed new fixtures, wiring, circuits, and motors.
Journeyman Electrician
Precision Solar Renewables
01.2022 - 05.2023
- BESS
- Battery Storage journeyman electrician
- Installed PVC, electrical cabinets, cable tray.
- Processed, utilized and communicated technical concepts.
- Leadman responsibilities.
- Underground PVC work.
- Performed continuity tests to identify areas lacking proper seals.
- Disconnect/Meter can terminations.
- Quickly learned new skills and applied them to daily tasks, improving efficiency and productivity.
- Underground/Fence ground grid.
- Used critical thinking to break down problems, evaluate solutions and make decisions.
- Interpreted electrical codes and diagrams to complete electrical repair and installation tasks.
- Educated wide range of entry-level electricians on best practices and company protocol, ensuring maximum productivity.
- Completed complex glanding and terminating processes for 480 cabinets, batteries, and 500 mcm wirings while safely.
- Initiated quality assurance project, reviewing products and materials for compliance.
Journeyman Electrician
Elight Electric
06.2022 - 11.2022
- Wire Management
- Completed rough-in, termination and underground work.
- Plug and play
- Repaired and installed new fixtures, wiring, circuits and motors.
- Wire management
- Operated tools according to prescribed safety practices.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Trained junior electrical professionals on proper procedures.
- Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
Electrician
TIC
09.2021 - 12.2021
- Dressed/Zip-Tied solar panel wiring.
- Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
- Assisted clients QA/QC on quality walkdown.
- Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
- Electrical Punch-List
- Identified areas of potential state safety code violations and implemented revisions.
- Worked with various types of cableways, conduits and other electrical raceways.
- Closed/Open circuits utilizing Lockout Tagout procedures
- Owned and addressed client needs and product issues from inception to resolution.
- Stored and maintained power tools and equipment for each job.
Electrician
IEA
01.2021 - 03.2021
- Reviewed and understood contract documents and verified adherence by team.
- Pulled wire when necessary or to assist other crews.
- Grounded panels to beams.
- Assembled, installed, tested and maintained electrical wiring, equipment and fixtures.
- Used power tools to make holes in the beams and panels.
- Optimized supply levels to keep stock within ideal parameters for expected needs.
- Took care of loading up tools and generators for crew.
- Made sure no trash or material was left on work area before clocking out.
Electrical Journeyman
HCS DKD
10.2020 - 12.2020
- Tested system wiring layouts, grounds and terminations to finalize installations.
- Plug and play
- Resolved problems, improved operations and provided exceptional service.
- Conducted research, gathered information from multiple sources and presented results.
- DC Wire
- Helped complete system installations, digging trenches and breaking up concrete.
- Wire management
Electrical Journeyman
HCS DKD
08.2020 - 10.2020
- Crew Leadman
- Properly stored and maintained power tools and equipment for each job.
- Worked with various types of cableways, conduits and other electrical raceways.
- Identified areas of potential state safety code violations and implemented revisions.
- Trained newly hired loggers in safety techniques and protective measures for equipment handling.
- Ran wires and set up support structures for panels
- Terminations
Electrical Journeyman
Walker Industrial
08.2019 - 12.2019
- MV terminations
- Examined blueprints, technical documentation and customer facilities to determine appropriate locations for installations
- Worked on various types of roofs to inspect supports, prepare surfaces and install solar mounting devices
- Wire management
- Demonstrated knowledge of safety protocols and industry best practices
Electrical Journeyman
McDermott
03.2019 - 07.2019
- Terminations, MCC or field
- Accurately read blueprints
- Accurately estimated time and materials costs for projects.
- Maintained compliance with company standards to perform all maintenance activities.
- Operated wide variety of equipment including power saws, sanders, grinders, cranes drill press, forklift and basic hand tools.
Electrical Journeyman
Meitec Inc.
07.2018 - 03.2019
- Terminations
- Read Prints
- Monitored inventory and reported items to be restocked for each job.
- Inspected machine parts for conformance to product specifications.
- Followed company procedures to maintain work environment in neat and orderly condition.
- Connected wires to circuit breakers, transformers, and other components.
- Used schematic diagrams to plan work.
- Safe and efficient operation of tools and material.
Electrical Top Helper
Zachry Group
01.2018 - 07.2018
- Gathered parts supplies and tools in preparation for each workday or new job
- Wire pull
- Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls
- Conduit running
- Demonstrated knowledge of safety protocols and industry best practices
- Reviewed electrical schematics and plans and followed according to specifications
- Grounding
Electrical Apprentice
MMR Group Inc.
08.2017 - 12.2018
- Terminations MCC or field
- Moved equipment, supplies and tools to work locations to assist crew in completing skilled work.
- Checked measurements and completed accurate cuts to prevent materials waste and maintain cost controls.
- Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites.
- Promoted commitment to safety standards and OSHA requirements
- Demonstrated knowledge of safety protocols and industry best practices.
- Maintained cleanliness and organization of work areas.
Electrical Apprentice
MMR Group Inc.
04.2016 - 09.2016
- Worked under supervision of journeyman to learn trade and develop electrical knowledge.
- Duct banks
- Trenching, using ditch which, mini excavator
- Pull Wire
- Conduit
Electrical Apprentice
PCL Construction
10.2015 - 02.2016
- Worked under supervision of journeyman to learn trade and develop electrical knowledge.
- Pulled wire to instruments, motors, mcc, and elsewhere needed
- Used hand and power tools and diagnostic equipment to complete various aspects of jobs.
- Followed direction of senior electrical professionals to complete safe, efficient tasks.
- Gathered parts supplies and tools in preparation for each workday or new job.
Education
High School Diploma - undefined
Psja North Early College High School
Pharr, TX05.2015
Skills
- NCCER Electrician
- OSHA 10
- Leadman Experience
- Proficiency at reading blueprints
- Remediation
- Bi-Lingual
- Terminations
- Able to adapt to any environment
- Wire splicing
- Working night shift
- Inverter terms
- Dependable and reliable
- Have own tools
- Safety procedures knowledge
- Fast learner
- Effective at multi-tasking
- Plug and play
- Good communication skills
- Combiner box terminations
- Valid Texas driver's license
- Wire management
- Wire knowledge
Timeline
Journeyman Electrician Unlc
BHI Energy
06.2024 - 11.2024
Journeyman Electrician
MMR
10.2023 - 11.2023
Journeyman Electrician Unlc
Gridworks
05.2023 - 06.2023
Journeyman Electrician
Elight Electric
06.2022 - 11.2022
Journeyman Electrician
Precision Solar Renewables
01.2022 - 05.2023
Electrician
TIC
09.2021 - 12.2021
Electrician
IEA
01.2021 - 03.2021
Electrical Journeyman
HCS DKD
10.2020 - 12.2020
Electrical Journeyman
HCS DKD
08.2020 - 10.2020
Electrical Journeyman
Walker Industrial
08.2019 - 12.2019
Electrical Journeyman
McDermott
03.2019 - 07.2019
Electrical Journeyman
Meitec Inc.
07.2018 - 03.2019
Electrical Top Helper
Zachry Group
01.2018 - 07.2018
Electrical Apprentice
MMR Group Inc.
08.2017 - 12.2018
Electrical Apprentice
MMR Group Inc.
04.2016 - 09.2016
Electrical Apprentice
PCL Construction
10.2015 - 02.2016
High School Diploma - undefined
Psja North Early College High School
Similar Profiles
Jeremy HewittJeremy Hewitt
Supervisor at BHI EnergySupervisor at BHI Energy
TINA DICKINSONTINA DICKINSON
Instrumentation and Control Technician at BHI EnergyInstrumentation and Control Technician at BHI Energy
Dalton CooperDalton Cooper
MCE Wind Turbine Technician at BHI EnergyMCE Wind Turbine Technician at BHI Energy