Summary
Overview
Work History
Education
Skills
Certification
Languages
Timeline
Generic

Armando Cruz

Pasadena

Summary

Over 23 years of experience as a pipefitter and 14 years as a carpenter, specializing in new construction and shutdown projects. Proficient in building gasoline refinery units, chemical units, coker units, and gas units, with extensive knowledge of various pipe sizes, thicknesses, and materials. Skilled in demolishing and erecting piping installations, including rigging and bolting flanges and valves. Experienced in pipe fabrication, hydro testing preparation, and working with diverse metals in both shop and field environments.

Overview

38
38
years of professional experience
1
1
Certification

Work History

Remodeling Contractor

Self-employed
Pasadena
01.2021 - Current
  • Repaired plumbing fixtures such as sinks, toilets and showers.
  • Planned and coordinated remodeling projects, including scheduling subcontractors and ordering materials.
  • Coordinated with subcontractors to ensure timely completion of projects.
  • Applied paint or wallpaper to walls or ceilings for a finished look.
  • Built custom shelving units utilizing power tools such as saws, drills and sanders.
  • Constructed decks from composite lumber or pressure-treated wood.
  • Installed insulation in walls or ceilings using various materials such as fiberglass batting or foam board insulation.
  • Assembled and installed cabinetry according to manufacturer instructions.
  • Maintained a clean job site by sweeping away debris at the end of each day's work.
  • Replaced damaged roofing shingles with new ones according to local building codes.
  • Installed drywall, trim, doors, windows, cabinets and countertops.
  • Grouted ceramic tiles on bathroom walls and floors for a professional finish.
  • Installed flooring material such as tile, hardwood or laminate floors.
  • Performed demolition work to remove existing structures in preparation for new construction.
  • Maintained a safe work environment by adhering to safety regulations at all times.
  • Applied superior abilities in plumbing, carpentry, and finishing to complete high-quality work for various projects.
  • Lifted heavy objects such as pre-fabricated panels onto supports during the course of fence installations.
  • Repaired existing fences that had been damaged by wind or other weather events.

Pipefitter

TWS / WHM / TURN2
03.2010 - 01.2021
  • Repair or replace worn parts such as seals and bearings on pumps and valves.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Install supports for pipes to keep them in place during installation process.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
  • Maintain records of all work performed including materials used and time taken.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Fabricate parts out of metal sheeting when required.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Troubleshoot malfunctioning systems by diagnosing issues with components such as valves or pumps.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Install, maintain, and repair pipes used in heating, cooling, lubricating, sprinkler systems, manufacturing processes, and waste disposal.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • Drilled and tapped holes for installation of studs.
  • Assisted in the construction of new boilers from scratch according to customer specifications.
  • Inspected welds visually for defects such as cracks or porosity.
  • Assembled parts into complete units by welding them together.
  • Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.

PIPE FITTER

JV Industrial / TWS / CUST-O-FAB LLC / TEPCO
02.1998 - 09.2010
  • Repair or replace worn parts such as seals and bearings on pumps and valves.
  • Inspect work areas to ensure that they are clean and free from obstructions.
  • Install supports for pipes to keep them in place during installation process.
  • Collaborate with other tradespeople such as electricians or plumbers when necessary.
  • Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
  • Maintain records of all work performed including materials used and time taken.
  • Use hand tools such as saws, drills, wrenches, threaders, to perform tasks related to the job at hand.
  • Fabricate parts out of metal sheeting when required.
  • Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
  • Measure, cut, thread, groove, bend and install piping according to specifications.
  • Troubleshoot malfunctioning systems by diagnosing issues with components such as valves or pumps.
  • Test plumbing systems for leaks using air pressure gauges or other testing devices.
  • Ensure compliance with safety regulations while performing assigned tasks.
  • Install, maintain, and repair pipes used in heating, cooling, lubricating, sprinkler systems, manufacturing processes, and waste disposal.
  • Assemble and secure pipes by welding joints or using cement or solder.
  • Fabricated and positioned screw pipe, socket weld pipe, and stainless steel tubing.
  • Drilled and tapped holes for installation of studs.
  • Assisted in the construction of new boilers from scratch according to customer specifications.
  • Inspected welds visually for defects such as cracks or porosity.
  • Assembled parts into complete units by welding them together.
  • Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.

Carpenter

Brown & Root / FLUOR DANIEL
11.1987 - 12.1997
  • Built jigs and fixtures to assist in the production of parts.
  • Fitted door locksets, deadbolts and other hardware on doors according to manufacturer's instructions.
  • Assisted in the installation of metal framing systems for commercial construction projects.
  • Measured, cut and shaped wood materials to specifications using hand tools, such as saws and chisels.
  • Troubleshot problems related to construction techniques or materials used in carpentry projects.
  • Executed complex framing tasks such as rafter installation, wall sheathing, roofing systems.
  • Inspected job sites prior to beginning work to identify any potential safety issues.
  • Implemented new processes or methods for more efficient execution of carpentry operations.
  • Provided guidance and technical advice to junior carpenters during project execution.
  • Anchored and braced forms to complete precise joining.
  • Constructing temporary forms to hold concrete while it sets, ensuring proper shape and support for various structures.
  • Installing and repairing wooden structures, such as supports, platforms, and enclosures, that are part of the refinery infrastructure.

Education

NCCER - Industrial Pipefitter

NCCER
Florida
11-2004

Skills

  • Project management
  • Construction scheduling
  • Plumbing installation
  • Custom carpentry
  • Building code compliance
  • subcontractor coordination
  • Pipe installation
  • Blueprint reading
  • Equipment maintenance
  • Welding techniques
  • Plumbing repair
  • Attention to detail
  • Safety awareness
  • Pipe grooving
  • Pump installation
  • Commercial piping
  • Torch brazing
  • Pipe measuring
  • Material prepping
  • Pipe alignment
  • Pipe fabrication
  • Commercial pipefitting
  • Installation and maintenance
  • Pipe threading
  • Pipe fitting
  • Pipe supports
  • Boiler installation
  • Pressure testing
  • Pipe rigging
  • Problem-solving
  • Excellent communication
  • Worksite safety
  • Grooved pipe installation
  • Pipe bending

Certification

  • TWIC Card
  • NCCER

Languages

Spanish
Professional
English
Professional

Timeline

Remodeling Contractor

Self-employed
01.2021 - Current

Pipefitter

TWS / WHM / TURN2
03.2010 - 01.2021

PIPE FITTER

JV Industrial / TWS / CUST-O-FAB LLC / TEPCO
02.1998 - 09.2010

Carpenter

Brown & Root / FLUOR DANIEL
11.1987 - 12.1997

NCCER - Industrial Pipefitter

NCCER

Similar Profiles

CREATE PROFILE