Arturo Vazquez

Service Technician

Champion Industries

Modesto, CA

04.2024 - Current

Provided technical support to customers over the phone and in person.
Maintained accurate records of service calls, repairs, and parts used.
Diagnosed problems and determined solutions for various customer issues.
Performed onsite repair of equipment at customer locations.
Installed new systems according to manufacturer specifications.
Conducted preventive maintenance on a variety of machines and systems.
Repaired faulty components such as motors, pumps, valves, switches.
Troubleshot electrical circuits using schematics and diagrams.
Inspected equipment for proper operation and safety hazards prior to use.
Calibrated instruments to maintain accuracy within specified tolerances.
Tested repaired items to ensure functionality before returning them to customers.
Replaced worn or damaged parts with OEM replacements as necessary.
Assembled components into complete systems following blueprints or other instructions.
Created and revised systems and procedures by analyzing operating practices, recordkeeping systems and forms control.
Streamlined office processes and procedures to boost profits and productivity and facilitate continuous improvements.
Negotiated and reviewed contracts, rates and terms with current facilities and suppliers.
Managed busy calendar for executive team, planning and preparing meetings and communications.
Communicated with vendors regarding supply orders and delivery timelines.
Provided training on the safe usage of equipment when needed.
Assisted with installation projects at both residential and commercial sites.
Responded quickly to emergency calls from clients needing immediate assistance.
Identified potential problems during routine inspections in order to prevent future breakdowns.
Followed all safety protocols while performing work in potentially hazardous environments.
Adhered to quality assurance procedures during every stage of the service process.
Communicated with clients for outstanding customer service and to increase repeat business.
Followed established safety rules, OSHA guidelines and company safety policies and procedures.
Trained new team members on service processes to increase productivity.
Traveled to customer locations to complete work for pre-set appointments.
Conducted service appointments to diagnose and fix problems.
Examined previously completed work for accuracy.
Set up and operated mechanical and manual tools and equipment.
Implemented troubleshooting tactics to identify causes of poor machine performance.
Completed documentation promptly, enabling service requests to be properly recorded and tracked.
Handled yearly and preventive maintenance to keep vehicles in good working condition.
Logged services performed in service ticket system.
Reconditioned and repaired machine systems and components to return to operation.
Developed preventive maintenance procedures and schedules.
Prepared job assignment reports and forms for accountability and traceability.
Filled out work orders, repair logs and maintenance plans to document work completed.
Installed new components or replaced defective parts to restore functionality.
Troubleshot malfunctions and diagnosed issues to service equipment quickly and fully.
Completed scheduled appointments on time to drive quality service.
Routinely inspected equipment for preventive and emergency maintenance needs.
Adjusted, connected, or disconnected wiring, piping and tubing to complete repairs and installations.
Kept records of parts and equipment used in projects to update inventory.
Coordinated repair and maintenance plans with co-workers and supervisors ahead of scheduled projects.
Disassembled dysfunctional machinery to perform root cause analysis and repairs.
Ran tests on newly repaired machinery and equipment to confirm proper functionality.
Inspected materials and equipment regularly to check for potential hazards and machine defects.
Estimated cost of labor and materials for projects and communicated value to clients.
Followed safety guidelines and wore protective gear when using power drills, circular saws, and other power tools.
Communicated with distributors to acquire necessary equipment for projects.
Greased mechanical parts with lubrication to achieve smooth and regular functionality.
Consulted blueprints and manufacturer manuals to plan appropriate and effective repair work.
Relayed important safety guidelines to clients to achieve thorough understanding of new equipment.
Installed new appliances, wiring and machinery in homes with defective equipment.
Took measurements and evaluated dimensions of surrounding area to correctly install new machinery.
Used register system to ring up customer purchases, process payments, and issue receipts.
Reviewed blueprints and manufacturer manuals before beginning installatio
Developed and implemented engineering strategies to improve production efficiency.
Trained and managed kitchen personnel in the preparation of broiler items.
Monitored quality of ingredients and prepared dishes to ensure that standards were met.
Observed proper safety techniques when handling hot ovens or grills during broiling process.
Cleaned and sanitized all work surfaces, utensils, and equipment used in the preparation of broiled items.
Ensured that all food was cooked to specified temperatures according to heal
Inspected product quality regularly throughout the day to maintain high standards of quality control.
Performed preventative maintenance on boilers and associated equipment, such as pumps, valves, and piping.
Installed new boiler systems in accordance with manufacturer specifications.
Conducted regular inspections of boilers to ensure safe operation and minimize downtime.
Repaired or replaced defective parts using hand tools, power tools, and welding equipment.
Adjusted fuel supply for proper combustion efficiency and emissions control.
Calibrated instrumentation to maintain optimal temperature and pressure levels within the system.
Monitored water levels in tanks to ensure that they remain filled at all times.
Troubleshot electrical problems with wiring connections, relays, circuit boards.
Maintained records of all maintenance activities related to boilers and other equipment.
Provided technical support to other departments regarding boiler operations.
Ensured compliance with local codes and regulations governing boiler operations.
Developed preventive maintenance programs for boilers to reduce breakdowns and improve efficiency.
Analyzed data from performance tests to identify areas requiring improvement or repair work.
Conducted safety checks on boilers before start-up procedures were performed.
Diagnosed faults in mechanical components using diagnostic testing methods.
Assisted in training personnel on the proper use of boiler systems and safety protocols.
Reviewed schematics for troubleshooting existing systems or designing new ones.
Supervised technicians during installation of complex boiler systems.
Inspected exhaust stacks for visible signs of corrosion or damage.
Updated inventory logs with information about spare parts used during repairs.
Analyzed variations in operating conditions and interpreted meter and gauge readings to troubleshoot plant equipment and resolve operational problems.
Planned and oversaw preventive maintenance schedules to keep equipment running at peak performance.
Welded components in flat, vertical, or overhead positions.
Signaled to crane operator to lift components to specific positions.
Followed safety procedures and protocols to minimize equipment mishaps.
Identified issues and brought to attention of foreman.
Analyzed specifications, diagrams and blueprints for each job.
Used hoist to load structural parts of boilers, pressure vessels, and tanks on pallets.
Managed movement of materials and equipment to different job sites.
Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
Studied blueprints to determine locations, relationships, and dimensions of parts.
Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
Cleaned pressure vessel equipment by using scrapers, wire brushes, and cleaning solvents.
Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
Assembled and checked each boiler for defects.
Mentored apprentices and inspected finished work to verify compliance with established requirements.
Took samples of water from boilers and cooling towers to perform standardized tests.
Managed procedures for start-up, daily operations and shutdowns.
Maintained chilled water systems, high pressure boilers, cooling towers and hydraulic pumps.
Performed maintenance services to correct and prevent problems.
Improved efficiency and reduced costs by recommending new processes and identifying problems.
Interpreted gauges, charts and various testing devices related to boiler and chiller operation.
Prepared reports detailing data analysis along with prospective solutions, benefits and costs.
Maintained building systems including HVAC, plumbing and electrical components.
Performed preventative maintenance on all equipment, ensuring optimal operation.
Scheduled and supervised contractors for various repairs and renovations.
Inspected buildings to identify safety hazards and potential areas of improvement.
Assisted with the development of emergency response plans in case of power outages or other issues.
Responded quickly to tenant inquiries or complaints regarding building operations.
Installed new fixtures and equipment as needed throughout the facility.
Updated records related to maintenance activities and inventory levels.
Repaired drywall, furniture, doors, windows, locksets., as required by tenants or management staff.
Operated snow removal equipment during winter months to ensure safe access to property grounds.
Managed vendor relationships for procurement of supplies necessary for ongoing maintenance work.
Collaborated with local fire departments on periodic fire drills and inspections.
Provided technical support for troubleshooting problems related to building systems.
Coordinated scheduling of preventive maintenance programs according to manufacturer's recommendations.
Implemented quality control measures designed to minimize risk associated with operations.
Reviewed blueprints or other documents prior to initiating any major renovation projects.
Coordinated building repair and construction projects, maintaining security and emergency response to provide preventive and corrective maintenance.
Assessed HVAC, electrical units and mechanical equipment to maintain functionality.
Monitored contractor performance, working with vendors to meet regulatory and organizational physical specifications.
Performed routine maintenance by inspecting drives, motors or belts.
Collaborated with professionals to assist server installation, removal, and other maintenance duties.
Ordered parts, supplies or equipment from catalogs or suppliers.
Implemented troubleshooting techniques to resolve issue.
Estimated costs to repair machinery, equipment or building structures.
Planned and laid out repair work using diagrams, drawings or schematic diagrams.
Repaired machines, equipment or structures using tools or equipment.
Assembled, installed or repaired electrical or electronic components and pipe systems.
Cleaned or lubricated shafts, bearings or other parts of machinery.
Maintained or repaired specialized equipment or machinery.
Dismantled machines, equipment, or devices to access and remove defective parts.
Set up and operated machine tools to repair or fabricate jigs, fixtures or tools.
Adjusted devices or control instruments using hand tools, levels or straightedges.
Aligned and balanced new equipment after installation.
Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
Installed equipment to improve energy or operational efficiency of residential or commercial buildings.
Designed equipment to aid repair or maintenance of machines, mechanical equipment or building structures.
Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.

Summary

Overview

Work History

Service Technician

Education

Tool Technology - Machinist

HVAC Apprenticeship - HVAC Installation And Repair Boiler Repair

Pipe Fitter And HVAC - Boiler Making / Refrigerant/HVAC

Skills

Languages

Timeline

Service Technician

Tool Technology - Machinist

HVAC Apprenticeship - HVAC Installation And Repair Boiler Repair

Pipe Fitter And HVAC - Boiler Making / Refrigerant/HVAC

Similar Profiles

William FrostWilliam Frost

Zachary LoeZachary Loe

Osonose AKPANOsonose AKPAN