AYOBAMI AWOYINFA

• Drove end‑to‑end delivery of large‑scale datacenter infrastructure programs, aligning cross‑functional teams across IT, network, logistics, and operations to improve deployment efficiency, reduce past‑due work, and accelerate overall site readiness.
• Managed complex datacenter IT/network deployments, overseeing workflow execution such as design validation, deployment readiness checks, hardware installation, labor tracking, and inventory coordination to ensure accuracy, compliance, and on‑time delivery.
• Led cross‑functional stakeholder alignment, coordinating engineers, program managers, logistics partners, and vendors to resolve constraints, optimize deployment schedules, mitigate risks, and maintain adherence to global operational standards.
• Implemented structured reporting and issue‑tracking practices to monitor deployment progress, identify bottlenecks, and escalate risks proactively to drive continuous improvement across multiple workstreams.
• Established operational discipline by standardizing processes, tracking deliverable status, and ensuring consistent execution across multi‑site environments.

• Managed the complete construction lifecycle of a Tier III AI data center, from scope development and contractor selection through execution and punch list closeout, ensuring full alignment with schedule, budget, and quality objectives.
• Directed the end-to-end IT infrastructure of a 420+ MW AI-driven data center, overseeing the installation and commissioning of 200,000+ NVIDIA GPU, 2000+ racks, and 750+ network devices across a 750,000 sq. ft. white space.
• Directed a cross-functional team of 100+ tradespeople and SMEs across electrical, mechanical, and network disciplines, with hands-on oversight of GPU rack builds, structured cabling, and critical infrastructure deployments.
• Led bidding processes and contractor negotiations, conducted constructability reviews of MEP designs, and evaluated RFP responses to secure cost-effective, technically sound vendors under favorable SLAs.
• Delivered commissioning reports and punchlists updates to client stakeholders, driving continuous improvement across commissioning workflows and standard operating procedures.
• Applied electrical expertise to manage power distribution systems, including PDU installations, breaker sizing, and redundancy planning, in accordance with NEC, NFPA, and OSHA standards.
• Facilitated QA/QC inspections and led root-cause failure analysis for equipment issues, reducing post-deployment faults by 40% during initial operational phase.
• Collaborated on the definition and documentation of system-level data center architecture, interfacing with design engineers to refine performance specifications and layout coordination.
• Conducted weekly executive reporting and construction metrics updates for 25+ internal/external stakeholders, utilizing MS Project, SharePoint, and Confluence to streamline visibility and accountability.
• Delivered key metrics and progress reports to stakeholders and executive management, ensuring transparency and proactive risk mitigation.
• Drove real-time resolution of onsite issues, from fiber routing and CRAH zoning to electrical switchgear configuration, safeguarding uptime and compliance with build codes and safety regulations.
• Continually engaged in fieldwork physically verifying installations, validating as-built conditions, and supporting commissioning efforts across power and environmental systems.

• Designed and deployed scalable Layer 2/3 network topologies within enterprise and hyperscale data center environments, supporting thousands of rack-mounted endpoints. Engineered secure and efficient traffic flows using VLAN segmentation, OSPF, inter-VLAN routing, NAT, and dynamic/static routing protocols tailored for high-throughput, low-latency workloads.
• Led cross-functional efforts across infrastructure deployment lifecycles—overseeing rack elevations, patching matrices, BOM validation, and cross-connect planning for Dell PowerEdge servers, Cisco UCS blade servers, and other high-density compute gear. Coordinated with construction teams, DC operations, and commissioning agents to ensure physical deployments, fiber paths, and IDF/MDF terminations met design intent and timeline
• Deployed and managed enterprise and data center switching platforms including Cisco Catalyst 9300/9500, Cisco Nexus, and Ubiquiti EdgeSwitch/EdgeRouter solutions. Configured advanced features such as STP, LACP, EtherChannel, port-channel load balancing, and 802.1Q trunking for fault tolerance and bandwidth optimization across ToR, spine-leaf, and core topologies.
• Installed and supported over 1300+ Cisco and Aruba Access Points, designing for high availability, seamless roaming, and minimal co-channel interference. Conducted wireless site surveys, heat mapping, and AP provisioning using RSSI thresholds and dynamic channel allocation, ensuring full RF coverage across white space, office zones, and NOCs.
• Configured and administered DHCP, DNS, and TFTP services to support automated endpoint provisioning and seamless IP address management across multiple subnets.
• Installed and supported over 500+ IP phones and 1300+ wireless access points, optimizing wireless deployments via site surveys, channel planning, and RSSI threshold tuning.
• Configured and maintained DHCP, DNS, and TFTP services supporting PXE boot imaging, automated endpoint provisioning, and dynamic IP management across isolated VLANs and multiple data center subnets. Integrated these services with CMDB and orchestration tools for streamlined lifecycle management.
• Reduced incident response time by 30% through proactive monitoring and documentation of network health using SNMP, Syslog, and remote CLI tools.
• Maintained accurate documentation of all deployed configurations, logical and physical diagrams, and client change logs using Visio, SharePoint, and internal CMDB platforms.

• Assisted in the installation and servicing of electrical systems across residential and light commercial sites, supporting over 15+ projects involving lighting, HVAC, audiovisual, and security infrastructure.
• Pulled, routed, and secured 1,000+ feet of electrical wire through conduit systems and structural cavities, ensuring compliance with NEC standards and job-specific schematics.
• Installed switches, outlets, and junction boxes, and connected circuits for audio/visual systems, signaling devices, and HVAC units, contributing to energy-efficient power distribution layouts.
• Interpreted and followed electrical blueprints and single-line diagrams, providing accurate layout support and pre-install assessments for system routing and breaker panel coordination.
• Conducted continuity and load testing using multimeters, ohmmeters, and oscilloscopes to ensure circuit integrity, proper grounding, and system safety prior to power activation.
• Spliced, joined, and connected wiring to fixtures and terminal devices using approved techniques, ensuring durable, code-compliant installations.
• Identified material requirements from drawings, prepared job kits, and maintained a clean, hazard-free workspace that improved task efficiency by 20%.
• Supported troubleshooting and diagnostic tasks for faulty circuits and overloads, reducing downtime and rework by assisting in real-time corrective actions with the Journeyman.
• Developed foundational expertise in conduit bending, load balancing, and panel wiring, contributing to successful inspections and sign-offs on multiple job sites.

• Delivered hands-on field support for network infrastructure, including troubleshooting and replacing switches, routers, firewalls, and modems across various environments (retail, commercial, and enterprise).
• Executed full-cycle low-voltage cabling installations (Cat5e/Cat6), including terminations, punch-downs, cable tracing, and certification testing for reliable connectivity.
• Installed and configured network hardware and VoIP systems from Cisco, Ubiquiti, Netgear, and Polycom; supported SIP and PoE integrations.
• Built and maintained network racks including patch panel dressing, switch/router configuration, power management (UPS), and environmental checks.
• Conducted Wi-Fi heat mapping and AP installations with proper channel planning and coverage validation.
• Supported office relocations and build-outs, ensuring end-to-end connectivity for all IT systems (LAN/WAN).
• Coordinated with NOCs and senior network engineers to assist in remote troubleshooting and Layer 1-3 diagnostics.
• Performed site surveys, signal testing, and asset audits to plan and document current network topology and hardware conditions.
• Ensured detailed service documentation, photo uploads, and ticket closures in line with Field Nation SOPs.
• Maintained excellent client and team communication, adhering to SLAs and project deadlines in fast-paced environments.

• Oversaw and executed technical installations for 25+ telecom and industrial infrastructure projects, serving as a key field engineer supporting end-to-end delivery across sites for MTN, Airtel, Etisalat, Oriental Foods, and a leading brewery.
• Led small teams of technicians and subcontractors on-site, ensuring adherence to installation timelines, safety protocols, and client specifications while maintaining high operational standards.
• Coordinated site readiness for radio and transmission base stations, managing the installation of BTS cabinets, rectifiers, RF transmission gear, hybrid power systems, and surge protection units.
• Supervised electrical wiring, load calculations, and circuit balancing for backup generators, solar inverters, and changeover panels, helping reduce system faults and power switchover time by 30%.
• Applied expert knowledge in structured cabling and low-voltage systems to route and terminate 5,000+ feet of Cat6, fiber, and power cable in compliance with telecom and industrial-grade standards.
• Managed on-site configuration and setup of critical network infrastructure, including Cisco switches, routers, wireless radios, and IP surveillance systems supporting live cutovers and troubleshooting across VLANs, DHCP scopes, and IP routing configurations.
• Conducted hands-on testing and validation using ohmmeters, multimeters, oscilloscopes, and signal analyzers, ensuring full circuit continuity, performance optimization, and grounding compliance.
• Interfaced with client engineers and project managers to review schematics, update redline drawings, and resolve change orders and RFIs ensuring clear documentation and effective communication between office and field teams.
• Played a key leadership role in ensuring safe, efficient, and quality installations across multiple remote and urban locations, improving first-time project pass rate by 25% and ensuring successful commissioning and handover.
• Gained broad expertise across power distribution, network infrastructure, and telecom site deployment, positioning self as a go-to engineer for cross-functional execution and on-site issue resolution.
• Automated electrical controls for industrial facilities using PLC programming (Siemens & Allen-Bradley) to streamline operations and reduce manual intervention across conveyor systems and generators(1.8MW- 5.4MW) and load controls.
• Directed the site synchronization and commissioning process for power and telecom systems, including validation of electrical loads, inverter backups, changeover logic, and final equipment handover to clients.

• Performed electrical maintenance operations across high-speed production lines, ensuring the reliability, safety, and efficiency of critical systems in a continuous manufacturing environment.
• Conducted routine inspections and troubleshooting on electrical systems to ensure optimal performance.
• 
  
• Performed preventive, predictive and corrective maintenance on low and medium-voltage switchgear, power distribution units, PLC-controlled machines, motors, and industrial control panels, reducing unplanned downtime by 30%.
• Programmed, troubleshot, and optimized PLC systems (Siemens S7, Allen-Bradley) and HMI interfaces to improve automation reliability and increase line efficiency.
• Conducted root cause analysis (RCA) on equipment failures and electrical faults, implementing corrective actions and long-term fixes to prevent recurrence.
• Coordinated with production, mechanical, and quality teams to support seamless plant operations, equipment upgrades, and integration of new electrical components.
• Reviewed and interpreted single-line diagrams, P&IDs, wiring schematics, and load calculations to support safe installations and ensure compliance with IEC and company electrical standards.
• Managed energy utilization audits and supported electrical optimization projects, contributing to a 10% reduction in plant energy consumption.
• Supported the planning and execution of shutdown maintenance, including full equipment overhauls, testing, and recommissioning within tight production schedules.
• Supervised external contractors and ensured adherence to BAT’s Health, Safety & Environmental (HSE) standards during project and maintenance activities.
• Maintained detailed logs, reports, and asset records through the plant’s Computerized Maintenance Management System (CMMS), aiding in long-term maintenance planning and compliance audits.

• Understudied electro-mechanical machines e.g. (Air handing units, industrial boilers, 4.MW generators, and chillers, etc.) and worked as a maintenance technician, with diligent guidance from qualified engineers
• Worked as a team with other industrial trainees to create more ideas during the general engineering department meeting
• Worked with diligence to make sure all equipment works fine for an effective productive day.
• Diagnosed technical issues and implemented effective solutions to minimize downtime in manufacturing processes.
• Operated and maintained production machinery to ensure optimal performance and compliance with safety standards.
• Operated machinery and equipment to ensure efficient production processes.