Berney Romero

• Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
• Tested equipment tools such as oscilloscopes, ammeters and test lamps.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors and wire and cable cutters to complete fast-paced work.
• Installed, maintained, repaired and tested equipment for electricity generation and utilization.
• Stored and maintained power tools and equipment for each job.
• Worked with various types of cableways, conduits and other electrical raceways.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.

• Planned layout and installation of electrical wiring, equipment and fixtures based on specifications and applicable code.
• Analyzed blueprints to diagnose potential electrical hazards and carry out risk assessments prior to starting new jobs.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Identified areas of potential state safety code violations and implemented revisions.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
• Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Worked with various types of cableways, conduits and other electrical raceways.

• Tested equipment tools such as oscilloscopes, ammeters and test lamps.
• Launched troubleshooting and tests on equipment post-installation to confirm compatibility and safety of electrical systems.
• Worked with various types of cableways, conduits and other electrical raceways.
• Inspected electrical systems, equipment and components to identify hazards, defects and repair requirements.
• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors and wire and cable cutters to complete fast-paced work.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Installed, maintained, repaired and tested equipment for electricity generation and utilization.

• Connected wires to circuit breakers, transformers, and other components.
• Installed, maintained and repaired electrical wiring, controls and lighting systems.
• Inspected transformers and circuit breakers for malfunctions.
• Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
• Tested circuit continuity to determine electrical compatibility and component safety.
• Repaired and replaced equipment, electrical wiring and fixtures.
• Attached power cables to equipment such as electric range and motor.
• Consulted manuals, schematics, wiring diagrams and engineering personnel to troubleshoot and solve equipment problems and determine optimum equipment functioning.
• Scheduled and supervised splicing or termination of cables in color-code order.
• Constructed, tested and maintained substation relay and control systems.
• Opened and closed switches to isolate defective relays, performing adjustments or repairs.

• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Tested equipment tools such as oscilloscopes, ammeters and test lamps.
• Installation and Maintenance of Equipment Above the Tower, Transformer-Rectifier Equipment and Repeaters Nokia and Ericsson Brands

• Performed electrical system installation of conduit, wire, power distribution and motor controls.
• Interpreted electric and electronic schematics and mechanical layouts to diagnose equipment problems.
• Worked in both commercial and residential buildings installing and maintaining fuses.
• Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
• Interpreted and validated technical issues, test solutions, follow-up and escalate when necessary.
• Installed electrical conduit and wiring for power, controls and lighting.
• Installed electrical and mechanical equipment in accordance with National Electric Code.
• Maintained and repaired solenoids and regulators on co-generation systems.
• Disconnected and removed motors and pumps.

• Observed equipment functioning to detect electronic and mechanical hazards or problems for service, repair or replacement.
• Obtained forklift and aerial lift platform licenses to meet optimum labor utilization.
• Maintained neat and clean work area to eliminate hazards.
• Repaired, maintained and installed motors, drives and wiring devices.
• Investigated electrical malfunctions with ammeter, multimeter and temperature probe test instruments to determine problems and apply solutions.
• Fixed, serviced and mounted pumps, gearboxes and piping systems.
• Read and interpreted blueprints and created engineering drawings and sketches.
• Installed electrical components in housings by soldering parts to assemblies.
• Read blueprints, schematics or technical orders to determine methods and sequences of assembly.
• Operated hand and power tools safely to completed detailed work on various components.

• Inspected train in motion and stationary to determine proper functionality.
• Performed daily inspections on switches.
• Cut, switched and supervised loading and unloading of railcars.
• Made public announcements on routes and delays.
• Communicated with train dispatchers to obtain and adjust directions.
• Maintained strict schedules for passengers and cargo.
• Performed air brake and electrical connection coupling.
• Collaborated with engineers to determine maintenance schedules and repairs, plan out-of-service times and coordinate returns to service.
• Adapted routes and schedules based on weather conditions to prevent delays and alerted supervisors of changes.
• Inspected locomotives and rail cars for necessary maintenance before, during and after long routes and for regular maintenance requirements.
• Kept records of contents and destination of each train car and made arrangements to add or remove cars at proper points on routes.
• Operated controls to activate track switches and traffic signals.
• Signaled to engineers regarding train stopping, starting, directional switches or emergencies.

• Used testing instruments such as ohmmeters, voltmeters, ammeters and multimeters.
• Worked from ladders, scaffolds and lifts to install, maintain or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors and wire and cable cutters to complete fast-paced work.
• Read and interpreted electrical, mechanical and architectural drawings and electrical code specifications for wiring layouts.
• Worked with various types of cableways, conduits and other electrical raceways.
• Installed, maintained, repaired and tested equipment for electricity generation and utilization.

• Assembled and fabricated electrical and electronic components and appliances.
• Distributed ordered components to appropriate technicians to complete repairs.

Manufacture in Installation of Electric Rack