Billy Jennings Jr
Kingsland,GA
Summary
Results-driven Work Leader with expertise in team leadership, process optimization, and conflict resolution. Recognized for high productivity and efficient task completion. Proficient in communication, time management, and adaptability.
Overview
14
14
years of professional experience
Work History
Paint Work Leader
Trident Refit Facility
Kingsland, GA
02.2019 - Current
- Prepared surfaces by washing, scraping, sanding and patching holes;.
- Mixed paints to desired color and texture;.
- Applied primers and sealers to prepare new surfaces for painting;.
- Measured, cut, and installed wallpaper;.
- Applied paint with brushes, rollers, spray guns or other equipment;.
- Cleaned up job sites after completion of projects;.
- Inspected painted surfaces for defects such as cracking, blistering or fading;.
- Consulted with clients regarding colors and finishes;.
- Estimated cost of materials needed for the project;.
- Provided expert advice on best products to use for various jobs;.
- Assessed work areas to determine safety measures required before beginning job;.
- Used ladders and scaffolds to reach high walls and ceilings;.
- Sanded woodwork prior to staining or painting;.
- Selected appropriate paint colors based on customer preferences;.
- Removed old wall coverings before applying new ones;.
- Repaired cracks in drywall prior to painting or wallpapering rooms;.
- Followed manufacturer's instructions when mixing chemicals for special applications ;.
- Performed minor repairs such as caulking windowsills before painting them ;.
- Protected furniture from dust generated during preparation of walls ;.
- Ensured proper ventilation while using solvents or oil-based paints ;.
- Wore protective clothing such as masks, respirators and gloves.
- Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.
- Used power and hand tools safely and effectively.
- Cleaned and properly stored paint equipment and supplies at end of each workday.
- Performed repairs to defects in walls by patching holes and scrapes prior at project start.
- Primed, smoothed and cleaned trim, walls and ceilings to prepare for painting tasks.
- Cleaned and smoothed surfaces prior to painting.
- Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
- Applied paints, sealers and solvents to plaster, sheetrock, concrete and wood.
- Spread undercoats and finish materials using rollers and spray equipment.
- Smoothed and finished surfaces on walls, trim and cabinetry.
- Chose correct brushes and materials for jobs and purchased from vendors.
- Prepared sheetrock, metal and wood surfaces for painting.
- Sprayed prepared surfaces with specified amounts of primers and finish coatings.
- Mixed and applied paints, varnishes and sealants to promote lasting finish.
- Identified surface to be covered and characteristics of finish to properly select roller, power sprayer and right size brush.
- Inspected work sites to measure dimensions, lay out work and estimate materials for each job.
- Performed series of surface preparation techniques to maximize paint durability.
- Operated airless spray equipment and motorized lifts.
- Selected, mixed and applied surface coatings to match and restore interior or exterior surfaces.
- Performed minor plaster repair, blending newly renovated wall surfaces with existing plaster.
- Mixed paints and solutions and monitored consistencies.
- Maintained thorough inventory of paint equipment and supplies by checking product levels.
- Documented progress and provided estimated completion time for clients.
- Recommended blending, harmonizing and contrasting color options to customers.
- Smoothed surfaces using sandpaper, scrapers or sanding machines.
- Covered floors before prepping, priming and painting walls and ceilings to protect them from chemicals and paint.
- Filled cracks, holes or joints using caulking guns or putty knives.
- Mixed and matched paint, stain or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
- Completed high-volume weekly painting jobs with consistently positive customer feedback.
- Applied primers or sealers to prepare bare wood or metal for finish coats.
- Removed old finishes by stripping, sanding or using water or abrasive blasting.
- Monitored paint supplies, placing orders whenever needed and properly and safely disposed of old paint.
- Erected scaffolding or swing gates or set up ladders to work above ground level.
- Calculated amounts of materials and estimated cost based on surface measurements or work orders.
- Washed and treated surfaces with oil, turpentine or other preparations.
- Calculated cost and quantities of required materials based on surface measurements or work orders.
- Selected and purchased tools or finishes for surfaces to be covered.
- Constructed scaffolding and supports to complete work above ground-level.
- Completed diverse repairs on commercial and residential buildings and equipment.
- Developed and maintained a comprehensive system for tracking progress on projects.
- Provided guidance to team members in completing assigned tasks.
- Assisted with the development of new processes and procedures to improve efficiency.
- Monitored workflow and ensured deadlines were met for all projects.
- Coordinated meetings with other departments to ensure project goals were achieved.
- Analyzed reports to identify areas of improvement and implemented solutions accordingly.
- Ensured compliance with safety regulations, policies, and procedures within the work area.
- Created performance metrics to measure employee productivity levels.
- Resolved any conflicts between team members that arose during projects or assignments.
- Conducted regular staff meetings to discuss updates on current projects and initiatives.
- Collaborated with other departments to develop cross-functional strategies for achieving organizational objectives.
- Trained new employees on company policies, procedures, and job duties.
- Maintained records of personnel performance evaluations and disciplinary actions.
- Identified potential problems before they arise and took appropriate action to prevent them from occurring.
- Promoted a positive work environment by encouraging collaboration among team members.
- Reviewed incoming requests for assistance from other departments or external customers.
- Managed inventory levels of supplies used in production activities.
- Advised management on changes needed to improve operational efficiencies.
- Provided technical support as needed when issues arose during production activities.
- Implemented corrective measures as necessary when quality standards were not met.
- Helped achieve team goals by rotating production lines and daily duties to meet demand.
- Used hand trucks and forklifts to unload, load and transport items.
- Followed daily preventive maintenance schedule for cleaning and lubricating machinery.
- Looked through work orders to determine type and quantity of materials needed for each production batch.
- Produced quality products by palletizing, packaging and assembling finished items.
- Used daily system logs to document production information, discussing issues with management.
- Reduced health and safety risks with strict adherence to safety protocols and PPE requirements.
- Set up and operated production machinery according to specific standards and protocols of company.
- Calibrated machines to adhere to quality standards and maintain required productivity levels.
- Prepared for work to be completed by studying assembly instructions, blueprint specifications and part lists.
Painter
Fleet Readiness Center Southeast
Jacksonville, Florida
07.2017 - 02.2019
- Prepared surfaces by washing, scraping, sanding and patching holes;.
- Mixed paints to desired color and texture;.
- Applied primers and sealers to prepare new surfaces for painting;.
- Applied paint with brushes, rollers, spray guns or other equipment;.
- Cleaned up job sites after completion of projects;.
- Inspected painted surfaces for defects such as cracking, blistering or fading;.
- Consulted with clients regarding colors and finishes;.
- Estimated cost of materials needed for the project;.
- Provided expert advice on best products to use for various jobs;.
- Assessed work areas to determine safety measures required before beginning job;.
- Used ladders and scaffolds to reach high walls and ceilings;.
- Sanded woodwork prior to staining or painting;.
- Selected appropriate paint colors based on customer preferences;.
- Removed old wall coverings before applying new ones;.
- Followed manufacturer's instructions when mixing chemicals for special applications ;.
- Protected furniture from dust generated during preparation of walls ;.
- Ensured proper ventilation while using solvents or oil-based paints ;.
- Wore protective clothing such as masks, respirators and gloves.
- Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.
- Used power and hand tools safely and effectively.
- Cleaned and properly stored paint equipment and supplies at end of each workday.
- Cleaned and smoothed surfaces prior to painting.
- Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
- Spread undercoats and finish materials using rollers and spray equipment.
- Chose correct brushes and materials for jobs and purchased from vendors.
- Prepared sheetrock, metal and wood surfaces for painting.
- Sprayed prepared surfaces with specified amounts of primers and finish coatings.
- Mixed and applied paints, varnishes and sealants to promote lasting finish.
- Identified surface to be covered and characteristics of finish to properly select roller, power sprayer and right size brush.
- Inspected work sites to measure dimensions, lay out work and estimate materials for each job.
- Performed series of surface preparation techniques to maximize paint durability.
- Operated airless spray equipment and motorized lifts.
- Selected, mixed and applied surface coatings to match and restore interior or exterior surfaces.
- Mixed paints and solutions and monitored consistencies.
- Maintained thorough inventory of paint equipment and supplies by checking product levels.
- Documented progress and provided estimated completion time for clients.
- Recommended blending, harmonizing and contrasting color options to customers.
- Smoothed surfaces using sandpaper, scrapers or sanding machines.
- Covered floors before prepping, priming and painting walls and ceilings to protect them from chemicals and paint.
- Mixed and matched paint, stain or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
- Completed high-volume weekly painting jobs with consistently positive customer feedback.
- Applied primers or sealers to prepare bare wood or metal for finish coats.
- Removed old finishes by stripping, sanding or using water or abrasive blasting.
- Monitored paint supplies, placing orders whenever needed and properly and safely disposed of old paint.
- Erected scaffolding or swing gates or set up ladders to work above ground level.
- Calculated amounts of materials and estimated cost based on surface measurements or work orders.
- Washed and treated surfaces with oil, turpentine or other preparations.
- Calculated cost and quantities of required materials based on surface measurements or work orders.
- Selected and purchased tools or finishes for surfaces to be covered.
- Constructed scaffolding and supports to complete work above ground-level.
Painter
Albany Marine CORP Logistics Base
Albany, Georgia
04.2011 - 05.2017
- Prepared surfaces by washing, scraping, sanding and patching holes;.
- Mixed paints to desired color and texture;.
- Applied primers and sealers to prepare new surfaces for painting;.
- Applied paint with brushes, rollers, spray guns or other equipment;.
- Cleaned up job sites after completion of projects;.
- Inspected painted surfaces for defects such as cracking, blistering or fading;.
- Estimated cost of materials needed for the project;.
- Provided expert advice on best products to use for various jobs;.
- Assessed work areas to determine safety measures required before beginning job;.
- Used ladders and scaffolds to reach high walls and ceilings;.
- Sanded woodwork prior to staining or painting;.
- Selected appropriate paint colors based on customer preferences;.
- Followed manufacturer's instructions when mixing chemicals for special applications ;.
- Ensured proper ventilation while using solvents or oil-based paints ;.
- Wore protective clothing such as masks, respirators and gloves.
- Painted walls and other surfaces using traditional and sprayer methods and worked efficiently to complete jobs within required timeframes.
- Used power and hand tools safely and effectively.
- Cleaned and properly stored paint equipment and supplies at end of each workday.
- Cleaned and smoothed surfaces prior to painting.
- Readied surfaces and surrounding areas for painting with sandpaper, tape and other materials.
- Spread undercoats and finish materials using rollers and spray equipment.
- Chose correct brushes and materials for jobs and purchased from vendors.
- Sprayed prepared surfaces with specified amounts of primers and finish coatings.
- Mixed and applied paints, varnishes and sealants to promote lasting finish.
- Identified surface to be covered and characteristics of finish to properly select roller, power sprayer and right size brush.
- Inspected work sites to measure dimensions, lay out work and estimate materials for each job.
- Performed series of surface preparation techniques to maximize paint durability.
- Operated airless spray equipment and motorized lifts.
- Selected, mixed and applied surface coatings to match and restore interior or exterior surfaces.
- Mixed paints and solutions and monitored consistencies.
- Maintained thorough inventory of paint equipment and supplies by checking product levels.
- Documented progress and provided estimated completion time for clients.
- Recommended blending, harmonizing and contrasting color options to customers.
- Smoothed surfaces using sandpaper, scrapers or sanding machines.
- Mixed and matched paint, stain or varnish with oil or thinning and drying additives to obtain desired colors and consistencies.
- Completed high-volume weekly painting jobs with consistently positive customer feedback.
- Applied primers or sealers to prepare bare wood or metal for finish coats.
- Removed old finishes by stripping, sanding or using water or abrasive blasting.
- Monitored paint supplies, placing orders whenever needed and properly and safely disposed of old paint.
- Erected scaffolding or swing gates or set up ladders to work above ground level.
- Calculated amounts of materials and estimated cost based on surface measurements or work orders.
- Calculated cost and quantities of required materials based on surface measurements or work orders.
- Selected and purchased tools or finishes for surfaces to be covered.
- Constructed scaffolding and supports to complete work above ground-level.
Education
High School Diploma -
Colquitt County High School
Moultrie, GA06-1999
Some College (No Degree) - Automotive Collision Repair
Moultrie Technical College
Moultrie, GASkills
- Forward-Thinking Strategy Design
- Project Estimation
- Production Quality Metrics
- Comprehension Proficiency
- Product Completion Expertise
- Process Management
- Quality assurance standards
- Repair equipment
- Critical Thinking
- Production Scheduling
- Mechanical Aptitude
- Inventory Management
- Technical Documentation
- Quality Control
- Lean Manufacturing
- Inspect parts
- Equipment Calibration
- Production cycling
- Assembly procedures
- Palletizing
- Product Inspection
- Organize supplies
- Record-keeping
- Reliability
- Production Planning
- Order Fulfillment
- Process Improvement
- Problem-solving abilities
- Parts inspection
- Tool operation
- Multitasking Abilities
- Manual Dexterity
- Worksite safety
- Physical Stamina
- Workflow Optimization
- Supply Chain Management
- Production deadline management
- Loading Protocols Management
- Dependable Time Management
- Detailed Measurement Techniques
- Analytical Issue Resolution
- Thoroughness In Tasks
- Organizational Supply Coordination
- Essential Math Competence
- Strategic Team Engagement
- Skilled at Multitasking
- Risk Management Procedures
- Equipment Maintenance
- Precision Machinery Use
- Data Analysis Reporting
- Proficiency in Production Environments
- Template Evaluation
- Prioritization and Planning
- Maintenance and Repair
- Strong Professional Etiquette
Affiliations
- Deer Hunting
- Camping
- Fishing
Languages
English
Professional
Timeline
Paint Work Leader
Trident Refit Facility
02.2019 - Current
Painter
Fleet Readiness Center Southeast
07.2017 - 02.2019
Painter
Albany Marine CORP Logistics Base
04.2011 - 05.2017
High School Diploma -
Colquitt County High School
Some College (No Degree) - Automotive Collision Repair
Moultrie Technical College
Similar Profiles
Zachary KnightZachary Knight
Marine Machinery Mechanic at Trident Refit FacilityMarine Machinery Mechanic at Trident Refit Facility
Jordan KruchtenJordan Kruchten
Information Technology Specialist at Trident Refit Facility BangorInformation Technology Specialist at Trident Refit Facility Bangor
Nicholas GoldschmidtNicholas Goldschmidt
Quality Assurance Inspector at Trident Refit Facility - BangorQuality Assurance Inspector at Trident Refit Facility - Bangor