Hardworking Asphalt Laborer known for high productivity and efficiency in task completion. Skilled in asphalt paving, maintenance, and repair with deep understanding of machinery operation and safety protocols. Excels at teamwork, communication, and problem-solving to deliver quality work under tight deadlines.
Also diverse in other fields of construction, i grew up around it all and working most fields in the industry.
Overview
11
11
years of professional experience
Work History
Asphalt Laborer
PC Maintenance
Boise, ID
02.2022 - 09.2024
Loaded asphalt into paving machines, spreaders and other related equipment.
Maintained cleanliness of tools, machinery and work areas.
Assisted with the installation of curbs, gutters and sidewalks.
Operated power tools such as jackhammers, tampers and saws.
Performed minor repairs to asphalt surfaces using cold patch material.
Unloaded asphalt from trucks onto job sites as needed.
Measured and mixed asphalt according to standard formulas.
Repaired potholes in existing pavement surfaces.
Cleaned up all debris after each job was completed.
Inspected equipment daily for any damage or malfunctions.
Ensured that safety protocols were followed at all times while on the job site.
Installed drainage systems when necessary prior to paving operations.
Removed old asphalt surfaces by means of shoveling or using a bobcat machine.
Leveled out uneven surfaces using rakes or shovels prior to laying down new asphalt.
Prepared sub-grade for new pavements by grading it properly with a motor grader.
Tamped down soil with hand tamps before applying hot mix asphalt layers.
Applied tack coat between layers of hot mix asphalt during the paving process.
Spread gravel over newly laid hot mix asphalt layers to provide traction.
Sprayed liquid bitumen over top layer of hot mix asphalt before rolling it out smooth.
Marked off areas where new pavement was being installed so traffic could be re-routed around them appropriately.
Utilized wheelbarrows or dump trucks to transport materials from one area to another on the job site.
Used range of hands tools, power tools and construction equipment to spread gravel and asphalt.
Prepared site areas for day's asphalt load.
Worked with team to safely direct traffic around work site.
Moved, arranged, and retrieved various supplies and tools to support job needs.
Completed accurate measurements and calculations to for project requirements.
Loaded and moved dirt, rocks, equipment and materials.
Operated tamping equipment to pack and make level.
Operated machines to spread and smooth stone and concrete on road beds.
Applied crack fill material using crack seal kettle and wand.
Controlled traffic around job sites to prevent dangerous situations and job interruptions.
Maintained equipment on-site with regular maintenance and repairs.
Signaled directions to other workers to keep operations safe and accurate.
Maintained close eye on material usage and adjusted settings to keep proper flow.
Completed equipment safety inspections and handled repairs.
Drove and operated curbing machines to extrude concrete or asphalt curbing.
Asphalt Laborer
curtis clean sweep
Boise, ID
07.2016 - 12.2021
Loaded asphalt into paving machines, spreaders and other related equipment.
Maintained cleanliness of tools, machinery and work areas.
Assisted with the installation of curbs, gutters and sidewalks.
Operated power tools such as jackhammers, tampers and saws.
Unloaded asphalt from trucks onto job sites as needed.
Performed minor repairs to asphalt surfaces using cold patch material.
Measured and mixed asphalt according to standard formulas.
Repaired potholes in existing pavement surfaces.
Cleaned up all debris after each job was completed.
Inspected equipment daily for any damage or malfunctions.
Ensured that safety protocols were followed at all times while on the job site.
Installed drainage systems when necessary prior to paving operations.
Removed old asphalt surfaces by means of shoveling or using a bobcat machine.
Leveled out uneven surfaces using rakes or shovels prior to laying down new asphalt.
Prepared sub-grade for new pavements by grading it properly with a motor grader.
Tamped down soil with hand tamps before applying hot mix asphalt layers.
Applied tack coat between layers of hot mix asphalt during the paving process.
Spread gravel over newly laid hot mix asphalt layers to provide traction.
Sprayed liquid bitumen over top layer of hot mix asphalt before rolling it out smooth.
Marked off areas where new pavement was being installed so traffic could be re-routed around them appropriately.
Utilized wheelbarrows or dump trucks to transport materials from one area to another on the job site.
Used range of hands tools, power tools and construction equipment to spread gravel and asphalt.
Prepared site areas for day's asphalt load.
Worked with team to safely direct traffic around work site.
Moved, arranged, and retrieved various supplies and tools to support job needs.
Completed accurate measurements and calculations to for project requirements.
Loaded and moved dirt, rocks, equipment and materials.
Operated tamping equipment to pack and make level.
Operated machines to spread and smooth stone and concrete on road beds.
Applied crack fill material using crack seal kettle and wand.
Controlled traffic around job sites to prevent dangerous situations and job interruptions.
Maintained equipment on-site with regular maintenance and repairs.
Signaled directions to other workers to keep operations safe and accurate.
Maintained close eye on material usage and adjusted settings to keep proper flow.
Completed equipment safety inspections and handled repairs.
Drove and operated curbing machines to extrude concrete or asphalt curbing.
Pipefitter
treasure valley fire protection
Boise, ID
01.2016 - 06.2016
Read blueprints and diagrams to determine the type of pipe and tools needed for each job.
Install, maintain, and repair pipes used in heating, cooling, lubricating, sprinkler systems, manufacturing processes, and waste disposal.
Cut openings in walls and floors to accommodate pipe and pipe fittings.
Assemble and secure pipes by welding joints or using cement or solder.
Measure, cut, thread, groove, bend and install piping according to specifications.
Inspect work areas to ensure that they are clean and free from obstructions.
Test plumbing systems for leaks using air pressure gauges or other testing devices.
Repair or replace worn parts such as seals and bearings on pumps and valves.
Adjust flow rates within specified limits by changing valve positions or altering lengths of pipe sections.
Perform routine maintenance on equipment such as checking fluid levels or replacing gaskets when necessary.
Security Officer
United Security Services
Boise, ID
01.2015 - 12.2015
Checked for safety hazards and took corrective action when necessary.
Monitored surveillance cameras and responded to suspicious activity.
Conducted regular security patrols of the facility grounds, parking lots, and perimeter areas.
Enforced access control measures in accordance with established procedures.
Responded to alarms and conducted investigations as required.
Confirmed visitor identification prior to granting entry into the building.
Maintained accurate logs of all security related activities.
Provided escorts for visitors as needed throughout the facility.
Participated in training sessions to stay up-to-date on current security trends and best practices.
Greeted staff, guests, vendors, contractors. upon arrival at the facility entrance.
Line Cook
Lucky Fins
Boise, ID
01.2014 - 07.2014
Prepared food items consistently and in compliance with recipes, portioning, cooking and waste control guidelines.
Cleaned food preparation areas, cooking surfaces, and utensils.
Stocked and restocked kitchen supplies as needed.
Operated various kitchen appliance such as a blender, oven, grill, or stand mixer.
Ensured freshness of food and ingredients by checking for quality, keeping track of old and new items, and rotating stock.
Performed basic knife skills such as dicing onions or slicing meats.
Followed health and safety standards to ensure safe working environment for employees and customers alike.
Education
GED -
College of Western Idaho
Nampa, ID
01-2013
Skills
Debris collection
Raking
Asphalt Paving
Site readiness
Hand tools proficiency
Worksite preparation
Traffic Management
Road Construction
Safety
Traffic Control
Materials Management
Materials Organization
Heavy Equipment Operation
Active Listening
Problem-solving abilities
Continuous Improvement
Maintenance knowledge
Problem-Solving
Equipment Repair
Team Collaboration
Attention to Detail
Adaptability and Flexibility
Time Management
Detail orientation
Affiliations
Gold panning and prospecting is one of my passions.
I am also an outdoorsman, love camping when i have the time as well as fishing.
Accomplishments
I grew up doing martial arts and have won many awards in competitions.
Me
i look forward to my future and want to build my life the best possible way, despite the set backs i have had ion my life my goals are big and my motivation to advance in life is even bigger. given the chance to shine and to succeed that's what i will do.
References
References available upon request.
Timeline
Asphalt Laborer
PC Maintenance
02.2022 - 09.2024
Asphalt Laborer
curtis clean sweep
07.2016 - 12.2021
Pipefitter
treasure valley fire protection
01.2016 - 06.2016
Security Officer
United Security Services
01.2015 - 12.2015
Line Cook
Lucky Fins
01.2014 - 07.2014
GED -
College of Western Idaho
Similar Profiles
Morrison BerriochoaMorrison Berriochoa
Account Manager at PC MaintenanceAccount Manager at PC Maintenance