Brandon Green
East Liverpool,OH
Summary
To enhance my professional skills, capabilities and knowledge in an organization which recognizes the value of hard work and trusts me with responsibilities and challenges. To use my experience to work hard to provide for my wife & three children. But, to learn something new everyday in my work & be the best employee I can be. Bringing to the table my 10+ yrs experience, I want the chance to continue my path in this feild because it's not just to feed my family but, unlike many I get to learn & work doing what I love to do which makes my job much easier, even on the bad days.. I'm happy with where I'm at but want the chance to become even better at what I do.
Overview
13
13
years of professional experience
Work History
Welder and Fabricater
Grayfin Manufacturing Inc
06.2011 - 07.2013
- Welded in flat, horizontal, vertical, and overhead positions.
- Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
- Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
- Fabricated shop parts directly from blueprints.
- Inspected welds and checked critical measurements to meet specifications.
- Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
- Clamped, held, tack-welded, heat-bent and bolted component parts to achieve required configurations and positions.
- Prepared welding equipment to perform advanced welding work.
- Enhanced welding quality by following precise welding procedures and maintaining proper equipment settings.
- I welded peal buckets and I welded these big heads that a chain gets attached to it and it drags it through the still mil and it gets shaved down and then we weld whatever dimensions on how much water to put on so the CNC Department could save it down to the right measurement and dimensions for the company, they had to be free to 500 Degrees before we could weld them.
- I did some work on these tubs for outta country I think it was for China and they got three round bar down them and they had to be tig welded and one bad weld the tube would be scrap. And the was like 100,000.00 dollar tubes.. so it was very important your welds was good.
Welder Ànd Fabricated
MAC Trailer Manufacturing
07.2013 - 02.2015
- Welded in flat, horizontal, vertical, and overhead positions.
- Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
- Demonstrated versatility in various welding methods including MIG, TIG, Stick, and Flux Core Welding techniques.
- Fabricated shop parts directly from blueprints.
- I work in the first station where we build the flat beds and put them together. We would start with the I beams and install them inside a jig that tightened them down and then we installed the cross members inside the two i beams and attack them, once it was tacked The Jig would lift up to one side so we could weld the verticals that were now Flats same thing for the other side, it made it a lot easier for us to weld, we would install the H beam that goes in the nose of the flatbed, we would do all the welding for the cross members and once them were done it got push to the next station.
Millwright
1102 Millwrights and Carpenters Union
05.2015 - 07.2018
- Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
- Made repairs and modified equipment by welding, soldering and brazing to avoid production delays.
- Used hoisting and rigging equipment to move heavy machinery and equipment.
- Adeptly utilized a range of hand tools, power tools, and precision measuring instruments to ensure accurate workmanship in all tasks.
- Operated machine tools to fabricate parts during overhaul, maintenance, or setup of machineries.
- Adhered to all workplace safety policies, regulations and compliances.
- Conducted comprehensive inspections of machinery to identify potential problems and ensure optimal performance.
- Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
- Improved workplace safety with diligent adherence to protocols, lockout/tagout procedures, and hazard identification.
- Reduced downtime for production lines by swiftly diagnosing and troubleshooting mechanical issues.
- Enhanced equipment reliability by performing regular maintenance and repairs on industrial machinery.
- Consistently met or exceeded company performance metrics for maintenance efficiency, equipment uptime, and safety compliance.
- Assisted in the planning and execution of major shutdowns, ensuring timely completion of critical tasks within budget constraints.
- Installed stationary industrial machinery and mechanical equipment according to layout plans.
Millwrights and Pile Drives
1090 Millwrights and Pile Union Hall
07.2018 - Current
- I switches my book to 1090 in 2018 when they was building the cracker plant.. and they just started mmmƙ⁵
- Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
- Used hoisting and rigging equipment to move heavy machinery and equipment.
- Made repairs and modified equipment by welding, soldering and brazing to avoid production delays.
- Adeptly utilized a range of hand tools, power tools, and precision measuring instruments to ensure accurate workmanship in all tasks.
- Operated machine tools to fabricate parts during overhaul, maintenance, or setup of machineries.
- Adhered to all workplace safety policies, regulations and compliances.
- Conducted comprehensive inspections of machinery to identify potential problems and ensure optimal performance.
- Aligned and leveled machines using precision measuring instruments to avoid unnecessary wear and tear.
- Improved workplace safety with diligent adherence to protocols, lockout/tagout procedures, and hazard identification.
- Enhanced equipment reliability by performing regular maintenance and repairs on industrial machinery.
- Reduced downtime for production lines by swiftly diagnosing and troubleshooting mechanical issues.
- Consistently met or exceeded company performance metrics for maintenance efficiency, equipment uptime, and safety compliance.
- Installed stationary industrial machinery and mechanical equipment according to layout plans.
- Assisted in the planning and execution of major shutdowns, ensuring timely completion of critical tasks within budget constraints.
- Inserted shims, adjusted tension on nuts and bolts and positioned parts, using hand tools and measuring instruments with Number% accuracy.
- Inspected and examined all machinery and equipment to detect malfunctions or irregularities.
- Read and interpreted blueprints and schematics to understand machinery design and layout.
- Achieved greater precision in machine alignment by utilizing laser technology during installation and repair projects.
- Disassembled machinery parts and categorized properly before moving to storage.
- Ensured proper lubrication of moving components by adhering to a strict preventive maintenance schedule based on manufacturer recommendations.
- Mentored junior millwrights as they acquired new skills and gained familiarity with complex industrial machinery operations..
Education
Journeymen - Millwrights And Carpenters
Union Training School
Detroit, MI08.2017
Diploma - K-12th Geade
Beaver Local High School
East Liverpool, OH05.2011
Welding Certification - Welding And Fabrication
Columbiana County Career And Technical Center
Lisbon, OH05.2011
OSHA 10 - Forklift Training
Copumbiana County Courier And Technical Center
Lisbon, OH10.2009
Skills
- Millwright and pile driving
- Rigging, reading dial indicators, micrometers, filler gauges, parallels,
- Welder
- Plasma cutting
- Fabricater
- Crane operater & rigger
- Forklift driver
- Skidstearer
- Pipe threader & pipe bender
- Stewert
- Mig, Tig, & Stick Welding
- Cutting & torching
- Quick learner
Personal Information
Date of Birth: 09/14/1992
References
- Jason Harris/ Millwright Forman, (330)986-6031
- Dan Siembida, Business Rep
- (330)402-7874
- Josh Milton
- 3303039803
- Brad Kasunich
- 3307076742
Timeline
Millwrights and Pile Drives
1090 Millwrights and Pile Union Hall
07.2018 - Current
Millwright
1102 Millwrights and Carpenters Union
05.2015 - 07.2018
Welder Ànd Fabricated
MAC Trailer Manufacturing
07.2013 - 02.2015
Welder and Fabricater
Grayfin Manufacturing Inc
06.2011 - 07.2013
Journeymen - Millwrights And Carpenters
Union Training School
Diploma - K-12th Geade
Beaver Local High School
Welding Certification - Welding And Fabrication
Columbiana County Career And Technical Center
OSHA 10 - Forklift Training
Copumbiana County Courier And Technical Center
Similar Profiles
Mathew AlexanderMathew Alexander
General Supply Chain Operations Manager at Nestle Dubai Manufacturing & Nestle Middle East ManufacturingGeneral Supply Chain Operations Manager at Nestle Dubai Manufacturing & Nestle Middle East Manufacturing
Mark D. PorterMark D. Porter
Setup Technician and Machine Operator – Ring and Spring Departments at Arcon Ring Manufacturing, LLC (formerly Arcon Manufacturing, Inc.)Setup Technician and Machine Operator – Ring and Spring Departments at Arcon Ring Manufacturing, LLC (formerly Arcon Manufacturing, Inc.)
Adam MoanderAdam Moander
Plant Manager at Menards/Midwest Manufacturing, Menards Distribution And Manufacturing CentersPlant Manager at Menards/Midwest Manufacturing, Menards Distribution And Manufacturing Centers