Brent Ferguson

Work History

Residential Driver

Waste Connections Of Missouri (Timber Ridge)

2023.05 - Current

Drove trucks along established routes, through residential streets and alleys and business and industrial areas.
Positioned and returned container on customer's property with lids and doors properly replaced and containers located without risk of obstruction traffic flow or driveway entrances.
Performed post-trip truck inspection, cleaned cab of any trash or spills incurred en route and turned in vehicle condition report.
Immediately reported any unsafe situations or service related issues to dispatcher or supervisor.
Worked closely with supervisors to improve route efficiencies and identify best practices.
Inspected trucks prior to beginning routes to verify safe operating conditions.
Refueled trucks and added other necessary fluids such as oil and hydraulic fluid.
Executed and performed daily safety and maintenance checks on garbage truck and related equipment.
Communicated with dispatchers concerning delays, unsafe sites, accidents, equipment breakdowns and other maintenance problems.
Recorded time on route sheet at each customer stop.
Attended and participated in scheduled training programs, briefings and meetings required by company or assigned by supervisor.
Reported route delays or interruptions to supervisors and dispatchers.
Collected route as outlined in route sheet, documenting changes or obstacles to job execution through written descriptions and attachment of photos taken with company camera.
Verified assigned truck fully-fueled and safe to operate and required paperwork on board before leaving yard.
Notified supervisor of incidents injuries or property damage, awaiting direction and avoiding taking action or making statements without company authorization.
Estimated customer-loaded container volume by sight, reporting overweight boxes immediately to dispatcher for direction when at risk of exceeding maximum tonnage.
Tracked personal compliance with restrictions on daily hours of service, reporting immediately to supervisor if in danger of being out of compliance.
Noted customer complaints regarding service quality or timings of service to forward complaints to higher management.
Utilized proper protective gear while handling materials.
Reported any mechanical problems to supervisor immediately.
Followed all safety procedures and regulations when operating collection truck.
Adhered to local, state and federal regulations pertaining to refuse and recyclable collection.
Observed other vehicles and pedestrians around collection truck to keep safe distance.
Reported illegal dumping or hazardous materials to supervisor for proper handling.

Truck Driver

Environmental Restoration

2021.11 - 2023.05

Operated with safety and skill to avoid accidents and delays.
Demonstrated safe driving by following regulations and safety procedures, resulting in zero accidents.
Maintained daily, legible DOT log book and submitted corresponding documents.
Utilized GPS and other navigation tools to plan routes and stay on schedule.
Dropped and hooked trailers and changed configuration of equipment.
Maximized load safety by balancing, securing, and weighing products.
Maintained safe driving record by observing road rules, remaining cautious, and alert in unfamiliar areas and keeping control of vehicle.
Secured loads with proper strapping and bracing techniques to prevent damage to valuable assets across long-haul transports.
Inspected trucks for malfunctions and reported vehicles to management for corrective action.
Maneuvered trucks to correct locations for material drops, working with large equipment operators to correctly position loads for best distribution.
Hauled materials for road construction, large industrial use, construction and agriculture.
Inspected truck equipment and supplies such as tires, lights, brakes, gas, oil and water.
Maneuvered diverse vehicles on lots with obstacles and limited space.
Maintained required daily logs, vehicle inspection records and mileage.
Operated vehicles according to local, regional and federal transportation regulations.
Complied with truck driving rules as well as company policies and procedures regarding safe vehicle operations.
Fastened chains, straps, covers, and binders to secure load during transit.

Truck Driver

Wilson Truck Service

2022.02 - 2022.11

Drove tractor and trailer to weigh stations before and after loading and along routes to document weights and comply with state regulations.
Pre-tripped tractor and trailer to check condition of mechanical, safety and emergency equipment and notified supervisor of defects.
Loaded and unloaded trucks by operating special equipment to palletize freight and secure items for transport.
Maneuvered tractor and trailer into loading and unloading docks following crew signals to properly position freight.
Collected delivery instructions to verify freight and routes for on-time delivery and adjusted routes based on changing conditions.
Operated with safety and skill to avoid accidents and delays.
Demonstrated safe driving by following regulations and safety procedures, resulting in zero accidents.
Maintained daily, legible DOT log book and submitted corresponding documents.
Dropped and hooked trailers and changed configuration of equipment.
Clearly communicated with dispatchers to give updated information on estimated times of arrival and latest road conditions.
Inspected trucks for malfunctions and reported vehicles to management for corrective action.
Verified contents of inventory loads against Bills of Lading.
Inspected truck for defects and safe operating condition before, during and after trips.
Fastened chains, straps, covers, and binders to secure load during transit.
Complied with truck driving rules as well as company policies and procedures regarding safe vehicle operations.

Maintenance Technician

Hrm Services

2021.07 - 2022.01

Operated varied hand and power tools to complete repairs.
Used problem-solving skills to alleviate issues efficiently with minimal supervision.
Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
Completed daily, weekly, and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
Quickly responded to internal service calls regarding malfunctioning equipment and completed repairs.
Installed new locks, door handles, and door closers.
Monitored and documented work performance in maintenance logs in compliance with company guidelines.
Maintained restroom functionality by repairing leaking faucets, clogged toilets, and other equipment.
Worked with building managers to assess ongoing needs and plan preventive maintenance and cleaning schedules.
Followed instructions from supervisor regarding daily job tasks and duties.
Carried out building updates such as painting surfaces, replacing fixtures, and reorganizing rooms.
Performed scheduled maintenance on electrical, plumbing, and HVAC systems.
Worked quickly on emergency requests in order to minimize disruptions to operations.
Used standard housekeeping equipment, tools, and supplies to accomplish basic cleaning.
Sourced and obtained multiple quotes for parts and supplies per purchasing requirements.
Performed minor wall repair, installed drywall, and applied wallpaper.
Responded to emergency fire alarms, plumbing leaks and power outages to implement swift resolutions.
Supported safety with well-maintained grounds, parking lots and landscaping.
Inspected building systems to evaluate HVAC, electrical and plumbing maintenance needs.
Tested fire safety and emergency systems and inspected fire extinguishers and sprinkler systems.

Pest Control Service Technician

Orkin Pest Control

2019.11 - 2021.07

Inspected commercial and residential buildings and structures for pest issues.
Educated and advised customers on preventive measures to reduce pest infestations.
Applied pesticides to inside and outside of structures utilizing company protocols.
Applied chemical solutions on building surfaces to eliminate pests.
Deployed physical baits, glue boards, and traps to catch and eliminate interior pests.
Wrote detailed reports for each job, noting sanitation, and structural issues that could potentially lead to pest activity.
Drove to customer residences and places of business to inspect for pests.
Complied with safety guidelines and regulations with during pest control processes.
Responded to customer inquiries and complaints regarding pest control services and solutions.
Located and evaluated pest damage to buildings and grounds to determine extent and optimal corrective actions.
Responded to customer phone calls and emails quickly to maximize service and improve retention rates.
Completed required treatment documentation while on-site and returned paperwork to office for processing.
Adhered to most stringent safety procedures when applying chemicals.
Performed general pest control solutions such as bed bug and termite inspections and treatments.
Prepared reports and kept detailed records of pest control activities.
Conducted property and building walk-throughs to assess conditions, identify infestations, and isolate sources.
Determined most efficient method to get rid of pests depending upon type of bug and degree of infestation.
Successfully conducted integrated pest management practices in residential, commercial and industrial settings.
Performed routine maintenance on pest control equipment to manage wear and tear.
Coordinated with other departments and personnel to determine compliance of pest control standards and protocols.
Utilized computer software to manage customer information and service scheduling.

Haul Truck Operator

Trap Rock & Granite Quarries

2018.05 - 2019.11

Operated with safety and skill to avoid accidents and delays.
Remained alert and prepared to protect crew against danger.
Maneuvered diverse vehicles on lots with obstacles and limited space.
Inspected truck equipment and supplies such as tires, lights, brakes, gas, oil and water.
Maneuvered trucks to correct locations for material drops, working with large equipment operators to correctly position loads for best distribution.
Operated range of heavy equipment on regular basis with advanced skill.
Trained in diverse pieces of equipment and useful attachments to handle team needs.
Met project demands consistently through careful and consistent operation of heavy equipment.
Operated machining equipment safely with team of operators.
Performed thorough pre-shift and post-shift inspections and accurately completed equipment logs and reports.
Remove debris and leveled ground to prepare job sites for construction projects.
Loaded and moved materials such as dirt and rocks based on specific job needs.
Observed hand signals, grade stakes and other markings when operating machines.
Worked flexible hours across night, weekend and holiday shifts.

Construction Laborer

Jc Enterprises

2014.05 - 2017.07

Utilized hammers, saws, squares, levels, and fastening devices to complete projects.
Worked independently in fast-paced environment while meeting productivity and quality expectations.
Brought materials and tools from trucks and storage facilities to work site locations and organized for expected needs.
Worked with more knowledgeable professionals to grow understanding of principles and construction standards.
Worked with contractors and other tradespeople to meet project specifications and deadlines.
Gathered waste and trash from job sites for placement in refuse containers to keep job sites clean and organized.
Operated power equipment to move materials and promote job efficiency.
Installed drywall, flooring and other interior finishes to create finished and functional living and work spaces.
Demonstrated safe and proper operation of equipment and tools to prevent harm to team members.
Dug trenches and set up forms to specified requirements for concrete pours.
Used variety of hand and power tools to complete tasks.
Loaded and unloaded materials and equipment onto and off construction sites.
Cleaned and maintained tools, equipment and worksites.
Followed instructions and safety protocols to prevent accidents and injuries.
Provided labor support to carpenters, masons and other skilled trades.
Completed tear-down of existing structures to prepare for new construction.
Installed drywall, siding and other structural components.
Worked on sites, installing roofs and other exterior components.
Helped with erecting scaffolding and ladders.
Operated forklifts and boom lifts to complete various tasks.
Finished surfaces of woodwork or wallboard in houses and buildings with paneling, paint and hand tools.

Summary

Overview

Work History

Residential Driver

Truck Driver

Truck Driver

Maintenance Technician

Pest Control Service Technician

Haul Truck Operator

Construction Laborer

Education

High School Diploma -

Skills

Work Availability

Timeline

Similar Profiles

SHEILA BOLLMANSHEILA BOLLMAN

Michael MilesMichael Miles

Jace ComickJace Comick