Bric Garrett

• Performed regular inspections of raw materials, components, and finished products.
• Maintained records of test results, inspection findings, and corrective actions taken.
• Prepared detailed reports on quality performance metrics for management review.
• Collaborated closely with other departments to ensure high levels of customer satisfaction.
• Conducted periodic reviews of existing Quality Control documents for accuracy.
• Observed customer specifications by monitoring quality control of finished products.
• Reviewed welding procedures and work instructions to ensure compliance with applicable codes, standards, and customer specifications.
• Inspected welds for defects such as cracks, porosity, undercut, incomplete fusion, misalignment, and other irregularities using visual inspection techniques.
• Monitored activities of welding personnel to ensure that proper welding techniques were used.
• Ensured all welders had the appropriate certifications required by code or contract documents prior to performing any welding operations.
• Verified that welders had completed all required qualifications tests before beginning production operations.
• Maintained records of daily welding activities including number of joints made, type of process used, material used.
• Recommended modifications when necessary to improve quality or reduce costs associated with welding operations.
• Provided technical support regarding issues related to welding processes and materials selection during fabrication activities.
• Coordinated with project managers regarding scheduling of inspections and performance of corrective actions when needed.
• Documented inspection results by completing reports and logs and summarizing and entering data into quality database.
• Used specialized tools to take precise measurements of various aspects of samples.
• Marked materials with grade or acceptance status.

• Evaluated work against design specifications.
• Tracked information and authored daily reports using Procore.
• Identified production concerns and worked with supervisors to understand and remedy situations.
• Inspected, tested and measured materials for conformance to specifications and regulatory requirements.
• Marked materials with grade or acceptance status.
• Produced official reports of findings to meet regulatory standards and assist senior leadership with improving operations.
• Matched arriving materials with purchase orders, submitted discrepancy forms as necessary.
• Provided safety information to contractors, engineers, or test equipment operators.
• Conducted visual inspections and non-destructive testing of welds to ensure code compliance.
• Inspected welding operations for adherence to quality control standards.
• Performed destructive tests on welds as required by industry codes.
• Verified that all welders have the necessary qualifications prior to production welding.
• Monitored welders' performance during production welding activities.
• Documented inspection results in accordance with company policies and procedures.
• Assisted in the development of improved methods of fabrication or installation of various products.
• Maintained accurate records of all inspections conducted within the facility.

• Administered tests to welders to assess understanding of work and applicable code requirements.
• Evaluated work against design specifications.
• Tracked information and authored daily reports documenting welders and the welds made as well as daily project progression.
• Inspected, tested and measured materials for conformance to specifications and regulatory requirements.
• Notified supervisors or other relevant personnel of test or production issues.
• Performed weld inspections as per AWS and ASME Codes and Standards as well as Client Specifications.
• Able to interpret and implement engineering drawings, specification, and standards as it relates to welding.
• Demonstrated the ability to work in an outdoor environment performing piping system walk downs that included climbing.
• Generate weld inspection records and test records including weld mapping and providing unique identification numbers

• Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
• Read and analyzed blueprints, sketches and designs prior to constructing and laying out piping for assembly.
• Performed piping work in maintenance, repair and construction of different types of systems.
• Cut diverse pipe sizes and lengths to prepare for installation.
• Verified and gathered measurements to determine proper piping sizes.
• Layout, prep, and fabricated positioned butt weld, screw pipe, and socket weld pipe made of carbon steel, stainless steel, and other exotic alloys. As well as bending and installing stainless steel tubing.
• Inspected and tested installed systems to isolate and identify faults.
• Installed automated controls to regulate pressure and volume in pipe systems.
• Inspected installed systems using hydrostatic testing or pressure gauges.

• Assessed materials, parts and products for conformance with quality control requirements and production specifications.
• Wrote detailed reports outlining performance, quality and defect rates.
• Completed detailed daily reports of multiple crews progress and conducted continuous inspections of specific component installations.
• Documented nonconformities and recommended techniques for prompt resolution.
• Performed proper tagging and identification of parts and components, enabling rejected or non-repairable parts to be properly marked, quarantined and rendered unusable.
• Documented, filed and maintained proper inspection records and quality assurance documents.
• Inspected, tested and measured materials, products and installations against specifications.
• Conducted routine visual inspections of Boilermakers, Pipefitters, and Welders work to uncover issues with compliance and tolerances.
• Measured product dimensions to assess compliance with specifications.
• Documented inspection information and compiled data into reports for dissemination to management.
• Observed employee fieldwork and proper usage of materials for quality and consistency.

• Prepared and planned worksites to help jobs run smoothly.
• Delegated duties to employees based on skillset.
• Reported project progress, site problems and labor status to supervisors.
• Created work crew schedules and delegated assignments.
• Trained and monitored each employees personal performance to assign daily tasks according to their skill set and help improve individuals performance.
• Reviewed project drawings and specifications to determine number of workers needed to complete jobs.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.
• Prioritized and organized tasks to efficiently accomplish daily progress goals.

• Complete Reformer Retube Project
• Managed sites by focusing on safety, operations and productivity.
• Supervised projects to uphold schedule requirements and quality demands.
• Checked project details to verify job site materials and equipment.
• Communicated with employees to demonstrate high standards and mitigate issues.
• Established and maintained good working relationships with all other contractors and with the Client.
• Trained crew members how to perform high-quality work with safety and efficiency in mind.
• Delegated work to team members and checked for completion in compliance with company guidelines and customer needs.

• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
• Observed safe work rules and utilized fall protection and PPE.
• Drilled and tapped holes for installation of studs.
• Assembled and disassembled boilers, tanks, vats, pressure vessels, exchangers and heaters according to blueprint specifications.
• Identifying signs of potential problems with boilers, tanks and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
• Installed and replaced drain pipes and water supply lines.
• Filled piping systems with water and air to test for leaks.
• Cut openings in walls and floors to accommodate pipe and pipe fittings.
• Performed rigging and forklift operations to maneuver parts and machinery.
• Inspected and tested installed systems to isolate and identify faults.
• Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
• Communicated with customers regarding recommendations on repairs, replacements and upgrades of tanks, piping and equipment.
• Identified, removed and replaced worn components to maximize system functionality.
• Bored holes into existing structures to install piping to meet new system specifications.
• Applied specialized skills such as layout, cutting prepping, fitting, and welding to complete high-quality piping work.
• Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.

• Filled piping systems with water and air to test for leaks.
• Performed rigging operations to maneuver parts and machinery.
• Inspected worksites to determine presence of obstructions, unsafe conditions and crew errors.
• Read and analyzed isometric drawings, sketches and designs prior to constructing and laying out piping for assembly.
• Performed piping work in maintenance, repair and construction of different types of systems.
• Operated manlifts, scissor lifts, and other heavy machinery and tools, following strict safety measures.
• Operated hydraulic High Torque equipment and hand tools to repair leaks and make adjustments to pipes.
• Installed pipe assemblies, fittings and valves to complete piping systems and turn over to client.
• Inspected and tested installed systems to isolate and identify faults.
• Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.

• Observed safe work rules, including fall protection and PPE.
• Installed piping systems for high pressure steam lines between new steam drum and new flash drum.
• Oversaw two apprentices, answered questions and provided feedback on work.
• Managed movement of materials and equipment to different work sites on the project.
• Handled all responsibilities for piping systems, including pipe preparation, fabricating, assembling, rigging & Installation, and post weld prep for NDE/Shearwave.
• Performed hydrostatic pressure testing of boilers and pressure vessels.
• Assembled boilers, tanks, vats, pressure vessels, exchangers and heaters according to Isometric specifications.
• Performed rigging and forklift operations to maneuver parts and machinery.
• Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.

• Read and analyzed Isometric drawings, sketches and designs prior to constructing and laying out piping for assembly.
• Operated Metabo and Porta-band to repair leaks and make adjustments to pipes.
• Filled piping systems with water and air to test for leaks.
• Cut Carbon and Stainless Steel pipes with Metabo and Porta-band to prepare pipes for installation.
• Performed piping work in maintenance, repair and construction of different types of systems.
• Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.
• Worked closely with team members to deliver project requirements, develop solutions and meet deadlines.

• Observed safe work rules, including fall protection and PPE.
• Threaded pipes using specified machinery.
• Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
• Performed rigging and forklift operations to maneuver parts and machinery.
• Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.

• Observed safe work rules, including fall protection and PPE.
• Oversaw two apprentices, answered questions and provided feedback on work.
• Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing.
• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
• Read and interpreted specifications, diagrams and isometric drawings for job.
• Identifying signs of potential problems with boilers and pressure vessels, such as tube leakage, scaling, pitting, metals discoloration and refractory failures.
• Performed rigging and forklift operations to maneuver parts and machinery.
• Carefully inspected worksites to determine presence of any obstructions, unsafe conditions and crew errors.
• Cut Carbon and Stainless Steel pipes with portable band saw and Metabo to prepare pipes for installation.

• Studied project specifications to plan the sequence and schedule for pipe installations.
• Reported to pipe Superintendent daily with project updates and estimated completion dates, noting any delaying issues.
• Analyzed job sites daily to mitigate risks for crew members and other craft workers sharing the same work area.
• Maintained high standards of safety, productivity and quality for every job.
• Mentored crew members and implemented training in jobsite Safety and task specific Safety, improving our overall quality and productivity.
• Conferred with other foreman, managers, craft personnel and team leaders to coordinate efficient site work and maintain tight schedules.
• Created team member schedules and delegated individual assignments for work crew.
• Coordinated schedules and day-to-day activities of crew to satisfy project needs.
• Inspected worksites to survey for potential hazards or safety concerns.

T/A project @ CF Industries Port Neal, Iowa

Demo all Piping and structural steel from two upright HP Vessels.

pull upper head of vessel and replace LIP SEAL.

Replace all Piping and steel "in kind".

Toldeo Refining Company Spring T/A

• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining.
• Observed work being performed and ensure safe work rules, including fall protection and PPE were being followed.
• Read and interpreted piping P&ID specifications, isometric drawings and blueprints for the job.
• Coordinated work of 150+ employees by offering clear direction and motivational leadership.
• Coordinated work schedules and distributed tasks to 150+ employees in various departments so that work could be performed according to scheduled priority.
• Oversaw workforce schedules and allocated resources in order to achieve project goals.
• Coordinated extensive planning, development of project milestones and budget for complex contracts.
• Reviewed completed work to verify consistency, quality and conformance.
• Conferred with business leaders to evaluate business needs and implement operational improvements.

• Fabricated and positioned process pipe, socket weld pipe and stainless steel pipe, and Flare system Piping
• Cut existing pipe and replaced in kind with new pipe using the appropriate rigging to prepare pipes for installation
• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining

• Cut, fit, and welded metal components, including plate, structural shapes, and pipe
• Installed piping systems for various processes including high and medium pressure steam lines
• Performed Hydro-testing of systems following installation
• Handled all responsibilities for piping systems, including fabricating, assembling, installing and testing prior to turnover to the client
• Worked overtime, including evenings and weekends, to respond to emergencies and fix unsafe conditions

• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining
• Fabricated and positioned screw pipe, socket weld pipe and stainless steel tubing
• Fabricated and fit up nozzles and channel heads on steam condenser units

• Handled all responsibilities for piping systems, including fabricating, assembling, installing and maintaining
• Observed safe work rules, including fall protection and PPE
• Read and interpreted specifications, diagrams and Isometric drawings for the job

New Construction, Northstar Compression Station

• Handled all responsibilities for piping systems, including fabrication, assembly, installation and maintainence.
• Studied project specifications to plan sequence and schedule for pipe installations.
• Inspected worksites to survey for potential hazards or safety concerns.
• Prepared and planned worksites to help jobs run smoothly.
• Delegated duties to employees based on skillset.
• Kept production team moving forward for progress in daily site operations.
• Created work crew schedules and delegated assignments.
• Allocated material and labor resources to promote on-time and under-budget project completion.
• Implemented onsite safety protocols and procedures and properly trained team members on prevention measures.

New Construction of Google Data Center.

Installation of cooling water system.

New Construction of Pork Production Plant @ Eagle Grove, Ia.

T/A of Waste Water Treatment @ Unilever

T/A @ Husky Refinery, Superior Wisconsin.

Coating Inspector for D-600 Launcher/Receiver Cecil Panhandle to Lima, Ohio.

• Produced official reports of findings to meet regulatory standards and assist senior leadership with improving operations.
• Conducted inspections of environmental conditions, surface preparation, and coatings applied to any piping, and structures, including primer, mid-coat, top-coat and epoxy coatings.
• Noted changes in conditions during construction and testing in project documentation.
• Inspected, tested and measured materials for conformance to specifications and regulatory requirements.

Hydro test piping and boiler.

• Accurately estimated time and materials costs for projects.
• Provided accurate measurements and estimates for all projects.
• Requisitioned new supplies and equipment.
• Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.

• Set project goals and schedule with owners and team members.
• Used control tools to update and monitor project schedules.
• Assisted project manager in drafting schedules and related documentation.
• Served as point-of-contact to support order management, testing and reporting.
• Troubleshot and resolved non-technical issues using support documentation and training.
• Established and maintained quality performance metrics to meet objectives.
• Produced status reports for customers and senior management.
• Coordinated with department leads to identify and outline solutions to client-specified challenges.

Pipe Foreman in charge of all Critical Path Operations working on Flare Piping and Flare Structure

• Arthur, Ia Predown & Shutdown @ Flint Hills Refinery 
• Shell Rock, Ia following the completion @ Arthur from August through October of 2014.