BRYLLE OCAÑA
Ar Rayyan
Overview
13
13
years of professional experience
Work History
Mechanical technican
Facilities Management and Maintenance Company, L.L.C.
Lusail City, Qatar
05.2024 - Current
- Daily routine inspection of all mechanical equipments such as centrifugal pumps, diesel generators, engine driven fire pump, electric motor driven fire pump, sump pumps, sewage pumps
- Performs planned preventative maintenance(ppm) quarterly and annually of mechanical equipments/ machineries according to expected date
- Follows task lists during ppm's per advice by the supervisor includes vibration checking, thermography, inspect for loose bolts, leaked pipes and gaskets, coupling for wear and tear
- Reports to supervior or foreman if found abnormalities in the machineries for immediate action or for scheduled repairs
- Follows safety procedure before doing any activities such as working permits, hot work permits and confined space permit compliance
- Repairs and replaced damaged mechanical components such as bearings, mechanical seals, gaskets, pipe leakages.
Mechanical technician/ Facility technician
Manchester Electronics(Testech Group)
Cebu, Philippines
09.2022 - 04.2024
- Maintain safe and efficient operations of air compressors (IHI, Atlas Copco, Mitsui Seiki), York centrifugal chillers(liquid cooled) centrifugal pumps, cooling towers, Reverse Osmosis, sewage treatment plant, make-up air unit , air handling unit , filter fan unit
- Installation of new machineries replacing the old and damaged with the use of hoist, jacks, powertools and forklifts, leveling and alignment
- Performing preventive maintenance on all machineries in the plant such as lubrication regreasing of pumps and motor bearings, pillow blocks, change oil of IHI turbo air compressor, inspecting tightness of base bolts, checking coupling run outs and realignment, adjusting the tightness of cooling tower v-belts, exhaust fans etc
- Vibration and thermal monitoring and checking of rotating machineries Replacing of suction filters of IHI turbo air compressors, solenoid valves, repairs of single acting actuator valves, cleaning and washing of intercoolers
- Overhaul and repair of centrifugal pumps, replaced bearings, mechanical seals, oil seals, repair damage footvalves, checkvalves, solenoid valves ,alignment of pumps amd motors, pneumatic actuators, directional control valves
- Performs welding and fabrication works with the use of electrode welding, oxy-acetylene gas cutting , drilling, bending and grinding
- Checks for pipe leakage, damaged/broken valves or chemical spillage report to immediate superior for repair and maintenance
- Performs other duties that the superior may assign from time to time
- Performs scheduled maintenance inspections, and adjusts, cleans and calibrates various systems to assure proper system operations Keeps all equipment and machinery parts well-lubricated all the time following established lubrication parameters to ensure that all equipment do not break down due to bearing or rotating element failure
- Assists other sections during repair of major equipment or installation, testing and commissioning of new mechanical equipment.
Mechanical technician
Saudi Brothers Commercial Company
Jeddah, Saudi Arabia
03.2018 - 11.2020
- Operation and maintenance of machineries in desalination plant facility Perform preventive maintenance of all pumps ( multistage pump, split type pump, vertical pumps, centrifugal pumps) Installation of r.o
- Vessels, semi-permeable membranes, motor, pumps, valves/check valves, foot valves, turbocharger, piping works etc
- Take water samples and carry out on site analysis as required in accordance with work instructions
- Daily check sheet monitoring of equipment instrumentation
- Checks for temperature and vibration of filter feed pumps, beachwell pumps and multistage pumps
- Report to immediate superior when unusual sound or overheat of machines, pipe leakage, damaged valves happens
- Performs welding and fabrication works
- Repairs and overhauling of centrifugal pumps, replaced damage bearings, oil seals and mechanical seals Performs shaft alignments using dial gauge.
Rubber Tyre Gantry Crane (RTG) Mechanic
International Ports Services
Dammam, Saudi Arabia
09.2015 - 09.2017
- Performs daily preventative maintenance on all rubber tyre gantry cranes such as degreasing and regreasing of bearings in pulleys, hoist motors, wire ropes, boogies, universal joints, pillow blocks etc
- Performs preventative maintenance of diesel generators includes replacing engine oil, oil filter, water filter, air filter, belt replacement, cleaning and washing of radiators, repair water pumps
- Change oils of differential gears and planetary gears, gearbox/ reducer, hydraulic tanks
- Replacement and installation of universal joints, tapered cylindrical bearings, planetary gears, differentials, wheel assembly, pulleys , brake motors, adjusting of tie rod ends
- Repairs of hydraulic system such as hose/pipe leakage, troubleshooting, disassemble and assemble of directional control valves, gear pumps and hydraulic cylinders Operates forklift, gantry cranes , manlift for moving and placing of heavy mechanical parts
- Performs welding and fabrication works for modification
- Response to breakdown calls of gantry cranes for troubleshooting and repair
- Performs shaft alginment of motor and gearbox, cable drums Leveling, measuring and balancing of gantry crane spreaders and conduct load testing for good lifting of containers inside the sea port.
Millwright fitter
International Metal and Construction Company
Abu Dhabi, United Arab Emirates
07.2013 - 07.2015
- Do installation and assembly of rubber tyre gantry crane, ship to shore cranes and rail mounted gantry cranes
- Placing and moving of heavy machineries and mechanical parts such as gear box, motors, drum cables , cabin, trolley wheels, spreaders, wire ropes with the use of fork lifts, overhead cranes or mobile cranes
- Performs erection works, hoisting and rigging
- Able to read and interpret drawings, layouting and planning before doing the installation works
- Assist surveyors in leveling using theodolite and dampy level during erection
- Performs welding and fabrication of structural parts such as ladders, handrails, skids, etc
- Use of liquid nitrogen in installation of bearings in the boggie wheels, trolley wheels, gearbox flanges
- Bolt tightening with the use of torque wrench Performs shaft alignment with the use dial gauge or laser alignment
- Installs and assembles bogie wheels, axles, planetary gears, differential gears, universal joints, tie rod end, brake motors, gear pumps and motor, hydraulic cylinders, direction control valves, pillow blocks, gearbox .
Fitter
Aboitiz Construction Group Inc. - Metaphil
Claver, Philippines
01.2012 - 12.2012
- Assist riggers in moving and placing of heavy materials or equipments and machineries at site with the use cranes Implements safety procedures which includes complete personal protective equipments and work permits
- Attend toolbox meeting with workmates, supervisors and engineers in planning the work to be done and keeping safe
- Reading and interpreting of drawings to do the work
- Installation of pumps, motors, gearbox, heat exchanger vessels, reactors etc
- Leveling and aligning using dumpy level or level bar during installation Bolt tightening with use of torque wrench
- Performs chipping and grouting in the foundation of motors and pumps
- Performs shaft alignment, run out test of pumps and motors using dial gauge.
Education
Computer Technician -
Divine Mercy Computer College
Electrical Installation and Maintenance NCll -
Technical Education and Skills Development Authority(TESDA)
08.2022
Millwright -
Training Institute for Marine Oil and Gas(TIMOG)
11.2020
Skills
- Performing preventive maintenance , repair works, overhauling pumps
- Disassemble and assemble of mechanical devices/ equipments
- Conducting diagnostic test to determine the root of problem
- Understanding and interpret drawings
- Ability to use precission tools ,inside/outside micrometers, vernier calipers, depth gauge, feeler gauge
- Installation, leveling, use of hand tools and powertools
- Can use oxy acetylene for cutting carbon steel, welding and fabrication
- Perform shaft alignment face and rim method, reverse alignment or laser alignment
- Operates forklift
Personal Information
- Age: 34 years old
- Place of Birth: Cebu City
- Height: 158cm
- Weight: 59kgs
- Date of Birth: 02/18/90
- Nationality: Filipino
- Marital Status: Married
- Religion: Roman Catholic
References
- Ariel Dagoy, Mechanical Engineer, MinebeaMitsumi
- Jilly Edisan, Plant Operations in charge, Saudi Brothers Commercial Company
- Nicolas Madrid, RTG Superintendent, International Ports Services
- Lourdino Diaz, Mechanical Supervisor, International Metal and Construction Company
- Delfin Careon, Millwright Supervisor, Aboitiz Construction Group Inc. Metaphil
Timeline
Mechanical technican
Facilities Management and Maintenance Company, L.L.C.
05.2024 - Current
Mechanical technician/ Facility technician
Manchester Electronics(Testech Group)
09.2022 - 04.2024
Mechanical technician
Saudi Brothers Commercial Company
03.2018 - 11.2020
Rubber Tyre Gantry Crane (RTG) Mechanic
International Ports Services
09.2015 - 09.2017
Millwright fitter
International Metal and Construction Company
07.2013 - 07.2015
Fitter
Aboitiz Construction Group Inc. - Metaphil
01.2012 - 12.2012
Computer Technician -
Divine Mercy Computer College
Electrical Installation and Maintenance NCll -
Technical Education and Skills Development Authority(TESDA)
Millwright -
Training Institute for Marine Oil and Gas(TIMOG)