Summary
Overview
Work History
Education
Skills
Timeline
Generic
Cameron Weems

Cameron Weems

Millwright
Winnsboro,LA

Summary

Skilled Millwright with extensive knowledge and mechanical abilities, including HVAC system maintenance. Recognized expert in maintaining turbines and pump systems. Highly capable troubleshooter adept at performing root cause to determine performance issues. Able to disassemble machinery, inspect components and recommend repairs.

Overview

3
3
years of professional experience

Work History

Millwright

Trade link / duke
10.2023 - Current
  • Performed inspection and troubleshooting to keep machines operating at optimal functionality.
  • Assembled machines with bolts, welds, rivets and other fasteners.
  • Assembled and installed shafting, conveyors and tram rails using welder and other tools.
  • Facilitated production by inspecting machinery and completing preventive maintenance.
  • Read and interpreted blueprints, created shop sketches and used gauges, indicators and micrometers to make precision measurements.
  • Aligned machines and equipment using micrometers, squares, rules, hand tools, and other devices.
  • Built foundations for the machinery out of wood, cement, or steel.
  • Positioned steel beams supporting bedplates of machines and determined work procedures based on knowledgeable reading of available blueprints and schematic drawings.
  • Worked with the crane operators to coordinate the lowering of basic assembly unites onto the bedplates and aligning them with the centerline.
  • Dismantled machinery for resets and in-depth repairs to restore their proper functioning.
  • Leveled the bedplate and established the centerline using straightedges, levels, and transits.

Millwright

Ethos Energy
05.2025 - 05.2025
  • Replaced defective parts of machines and adjusted clearances and alignment of moving parts.
  • Made repairs and modified equipment by welding, soldering and brazing to avoid production delays.
  • Used hoisting and rigging equipment to move heavy machinery and equipment.
  • Operated machine tools to fabricate parts during overhaul, maintenance, or setup of machineries.
  • Adeptly utilized a range of hand tools, power tools, and precision measuring instruments to ensure accurate workmanship in all tasks.
  • Conducted comprehensive inspections of machinery to identify potential problems and ensure optimal performance.
  • Disassembled machinery parts and categorized properly before moving to storage.
  • Ensured proper lubrication of moving components by adhering to a strict preventive maintenance schedule based on manufacturer recommendations.
  • Troubleshot machinery problems and suggested accurate repairs.
  • Implemented standard safety procedures to prevent hazards related to industrial machinery and equipment.

Turbine Millwright / millwright

Allied power group
05.2023 - 09.2023
  • Read and interpreted blueprints, created shop sketches and used gauges, indicators and micrometers to make precision measurements.
  • Aligned machines and equipment using micrometers, squares, rules, hand tools, and other devices.
  • Facilitated production by inspecting machinery and completing preventive maintenance.
  • Assembled and installed shafting, conveyors and tram rails using welder and other tools.
  • Performed inspection and troubleshooting to keep machines operating at optimal functionality.
  • Leveled the bedplate and established the centerline using straightedges, levels, and transits.
  • Inserted shims, adjusted tension, and positioned parts to set the correct clearances between the moving and stationary parts.
  • Completed required preventive maintenance and repair, including replacing worn parts and lubricating high-friction components.
  • Positioned steel beams supporting bedplates of machines and determined work procedures based on knowledgeable reading of available blueprints and schematic drawings.
  • Helped team complete assignments to meet goals.
  • Kept work area organized and clutter-free.

Millwright

Concept
03.2023 - 06.2023
  • Assembled and installed shafting, conveyors and tram rails using welder and other tools.
  • Assembled machines with bolts, welds, rivets and other fasteners.
  • Improved maintenance efforts by identifying root causes and adjusting strategies to prevent similar breakdowns in future.
  • Read and interpreted blueprints, created shop sketches and used gauges, indicators and micrometers to make precision measurements.
  • Aligned machines and equipment using micrometers, squares, rules, hand tools, and other devices.
  • Dismantled machinery for resets and in-depth repairs to restore their proper functioning.
  • Leveled the bedplate and established the centerline using straightedges, levels, and transits.
  • Inserted shims, adjusted tension, and positioned parts to set the correct clearances between the moving and stationary parts.
  • Worked with the crane operators to coordinate the lowering of basic assembly unites onto the bedplates and aligning them with the centerline.
  • Supported operations with consistent maintenance and updates of corporate files and records.

Boilermaker

Chevron Phillips Chemical
04.2023 - 05.2023
  • Measured old structural parts or assemblies to determine dimensional requirements of replacements parts.
  • Maintained compliance with all safety procedures from both client and employer.
  • Tightened or replaced bolts and gaskets to repair leaks.
  • Inspected equipment and structures to determine scope of work (SOW).
  • Used hand signals to notify crane operator to lift components to specific positions.
  • Interpreted blueprints, sketches, and specifications for each job.
  • Identified issues and addressed each immediately with job foreman.
  • Promoted a culture of continuous improvement within the team, consistently seeking ways to enhance processes and performance standards.
  • Operated forklifts, bobcats and track hoes.
  • Used power hammers or weld pressure vessel tubes to achieve leakproof joints.
  • Removed boiler casings, grades, handrails, manhole, and hole covers to facilitate access to boilers or other vessels for repair.

Boilermaker

Universal plant service
09.2022 - 03.2023
  • Read blueprints, ISOs and field drawings to locate reference points for accurate installation.
  • Built complex pressure vessels in fabrication shop and checked fit prior to installation.
  • Assessed risk and used safe techniques to maneuver components into position.
  • Used scrapers, wire brushes and cleaning solvents to clean pressure vessel equipment.
  • Aligned components to assemble frames, tanks and vats of boilers.
  • Hammered and ground down edges to help parts fit together tightly.
  • Repaired or replaced defective parts found on different pressure vessels using torches, power saws, and welding equipment.
  • Carefully positioned, aligned and secured structural parts and assemblies to frames, tanks, and vats.
  • Utilized plumb bobs and straightedges to locate and mark reference points on boiler foundations.

Floorhand

Noram Drilling
07.2022 - 02.2023
  • Aided in pipe handling tasks, such as lifting, moving, and connecting pipes during drilling operations.
  • Moved or relocated materials and equipment required for drilling tool assembly to and throughout work site.
  • Carried out general manual labor activities to aid site productivity.
  • Assisted in rig-up and rig-down procedures, ensuring timely project completion.
  • Showcased strong physical stamina throughout long shifts while remaining alert and focused on completing assigned tasks efficiently.
  • Enhanced drilling efficiency by maintaining and repairing equipment as needed.
  • Maintained clean, organized, hazard-free work areas for optimized site safety.
  • Monitored shaker and mud tank operations.
  • Completed job tasks accurately under challenging weather conditions, demonstrating adaptability and resilience.
  • Selected appropriate pumps, valves and associated equipment for productive drilling operations.
  • Performed minor repairs on drilling equipment and tools to limit operational disruptions.
  • Promoted a clean work environment by regularly organizing tools and materials on the drill floor.
  • Supported drilling operations with precise handling of drill pipes and collars, ensuring accuracy.

Boilermaker Apprentice

Universal plant service
07.2022 - 09.2022
  • Hammered and ground down edges to help parts fit together tightly.
  • Read blueprints, ISOs and field drawings to locate reference points for accurate installation.
  • Built complex pressure vessels in fabrication shop and checked fit prior to installation.
  • Welded sections of iron and steel copper to form boilers and large tanks.
  • Assessed risk and used safe techniques to maneuver components into position.
  • Aligned components to assemble frames, tanks and vats of boilers.
  • Connected attachments such as water tubes to complete boiler systems.
  • Consulted welding chart specifications to select appropriate thickness and type of metal and weld.
  • Used scrapers, wire brushes and cleaning solvents to clean pressure vessel equipment.
  • Attached rigging to cranes and hoists for lifting frames into place.
  • Conducted hydrostatic pressure testing of boilers and pressure vessels.
  • Identified telltale signs of boiler and pressure vessel issues by opening and inspecting systems.
  • Utilized plumb bobs and straightedges to locate and mark reference points on boiler foundations.
  • Bolted or welded together structures of pressured vessels and components.
  • Signaled to operators to safely lift heavy frames and plate sections into place.
  • Repaired or replaced defective parts found on different pressure vessels using torches, power saws, and welding equipment.
  • Used details from mechanical drawings to make adjustments to boiler system equipment.
  • Accurately measured raw materials before cutting with saws.
  • Carefully positioned, aligned and secured structural parts and assemblies to frames, tanks, and vats.
  • Removed equipment fastenings to determine cause for machinery malfunction.
  • Communicated with supervisors, informing of maintenance activities performed.

Education

GED - undefined

Family community Christian school
Baskin, LA
05.2021

Skills

  • Precision measuring
  • Power Tool Operation
  • Component Installation
  • Repair work
  • Hand and power tools
  • Installation safety management
  • Parts Fabrication
  • System building
  • Hand tool operation
  • Safety Procedures
  • Cutting and threading
  • Pipe cutting
  • Frame alignment
  • Blueprint Reading
  • Heavy Lifting
  • Mechanical Aptitude

Timeline

Millwright

Ethos Energy
05.2025 - 05.2025

Millwright

Trade link / duke
10.2023 - Current

Turbine Millwright / millwright

Allied power group
05.2023 - 09.2023

Boilermaker

Chevron Phillips Chemical
04.2023 - 05.2023

Millwright

Concept
03.2023 - 06.2023

Boilermaker

Universal plant service
09.2022 - 03.2023

Floorhand

Noram Drilling
07.2022 - 02.2023

Boilermaker Apprentice

Universal plant service
07.2022 - 09.2022

GED - undefined

Family community Christian school

Similar Profiles

CREATE PROFILE