Cameron Williams
Fort Lauderdale,FL
Summary
As a UA Journeymen pipefitter my objective was to read blue prints, install pipe as per drawing, aid in helping with the on the job training for the apprentices. Working safely and efficiently to meet the deadlines for the scope of work. Educate and mentor other that are new to the pipefitting and plumbing industry. Solve problems that may come up unexpectedly. Following the United Association Standard of Excellence.
Overview
9
9
years of professional experience
Work History
Pipefitter
ACCO Engineered Systems
Boise, ID
04.2026 - Current
- Installation of stainless steel tubing
- Assisting orbital welder in fitting up tubing
- Installation of hanger and supports
- Teaching apprentices the skillset of being a pipefitter.
- Tube bending
- Supported fellow team members in their tasks, fostering a collaborative work environment that prioritized both safety and efficiency.
- Eliminated risks by correctly identifying potential safety hazards.
- Fabricated and installed piping systems for various industrial applications.
Quality Control Inspector
ACCO Engineered Systems
Reno, NV
01.2026 - 04.2026
- Conducted thorough inspections of products to ensure compliance with quality standards.
- Evaluated production processes to identify areas for improvement and enhance product quality.
- Collaborated with production teams to address quality issues and implement corrective actions.
- Developed and maintained inspection documentation to support traceability and accountability.
- Inspected quality of products, taking note of functionality, appearance and other specifications.
- Inspected incoming and outgoing materials for accuracy and quality.
- Performed visual inspections and non-destructive tests where appropriate.
Pipefitter
Harris
Saint Paul, MN
08.2025 - 01.2026
- Testing piping system and equipment with hydro and pneumatic applications
- Balancing piping systems
- Start up for CDU's
- Adjusting VFD's for each CDU
- Brazing copper piping
- Copper installation
- Victaulic piping repair
- Flushing cooling water system
- Testing CRAH units and FCW units.
Pipefitter Foreman
Pueblo Mechanical And Controls
Phoenix, AZ
06.2025 - 07.2025
- Reviewed and studied blueprints to double-check installation and implementation project requirements.
- Inspected completed work to verify adherence to specifications and industry regulations.
- Coordinated workflow among crew members to optimize productivity and efficiency on job sites.
- Enhanced customer satisfaction ratings by motivating team members to strengthen quality and increase productivity.
• Trained new employees on safety regulations, operational procedures, and proper pipefitting techniques.
• Assessed work area conditions for hazards to maintain safe operations.
• Coordinated with departments to ensure timely project completion.
• Created detailed reports on job progress and materials used for each project.
• Resolved customer complaints regarding quality issues related to installed piping systems.
• Adhered to company policies while working on-site at client locations.
Pipefitter Foreman
University Mechanical Contractors Inc.
Phoenix, AZ
10.2024 - 05.2025
- Supervised installation and maintenance of piping systems to ensure compliance with safety standards.
- Coordinated workflow among crew members to optimize productivity and efficiency on job sites.
- Trained apprentices' in techniques, tools, and safety protocols for effective performance.
- Inspected completed work to verify adherence to specifications and industry regulations.
- Implemented process improvements that enhanced team performance and reduced rework incidents.
- Lead teams in complex pipe system installations for Base Build and Tool Install at Intel Ocotillo using carbon steel, stainless steel pipe, PVDF, PFA tubing, stainless steel tubing, PE Pipe, HDPE, PVC, and copper pipe.
- Enhanced safety measures by conducting regular inspections of tools, equipment, and work areas.
- Established effective communication channels between field personnel, management staff, clients, vendors ensuring smooth operations from start to finish on each project undertaken.
- Ensured timely completion of projects by monitoring progress, addressing delays, and adjusting resources as needed.
- Installed and maintained industrial piping fittings, valves, flanges and clamps to complete systems setup.
Pipefitter
Southland Industries
Phoenix, AZ
03.2023 - 06.2024
- Planned pipe system layout, installation and repair according to specifications.
- Fabricated and installed piping systems for various industrial applications.
- Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
- Installed and maintained piping systems in compliance with industry standards and safety regulations.
- Conducted inspections to identify leaks and potential hazards, ensuring safe operational environments.
Pipefitter
BMWC Constructors
Portland, OR
09.2022 - 03.2023
- Fabricated, assembled, installed and maintained piping systems.
- Completed complex projects on time through efficient time management and prioritization of tasks.
- Ensured safe work environments by strictly adhering to industry safety standards and procedures.
- Followed safe work practices, which included fall protection and personal protective equipment.
- Read and interpreted blueprints and schematics to determine locations, quantities, and sizes of materials required.
- Improved project efficiency by skillfully reading and interpreting blueprints, plans, and specifications.
Pipefitting/Plumbing Apprentice
UA Local 719
Fort Lauderdale
07.2017 - 09.2022
- Gained valuable experience through hands-on training under the guidance of skilled journeymen.
- Demonstrated eagerness to learn by asking questions and seeking clarification when necessary.
- Learned proper and safe use and maintenance of power tools, hand tools and safety equipment.
- Exhibited strong work ethic by consistently arriving on time, completing tasks diligently.
- Honed strong communication, problem-solving and organizational skills while completing tasks and working with team.
UA Instructor
UA Local 719 Plumbers & Pipefitters
Fort Lauderdale, FL
08.2021 - 08.2022
- Attended professional development workshops to stay current on relevant industry trends, technologies, and teaching methodologies.
- Enhanced student comprehension by utilizing diverse teaching methods and materials.
- Provided instructional handouts, texts, audiovisual aids and other materials to facilitate learning.
- Maintained a positive classroom environment by fostering respect, open communication, and inclusiveness among all students.
- Mentored apprentices, fostering skill development and adherence to safety protocols in hands-on training.
Education
High School Diploma -
Plantation High School
Plantation, FL06-2016
Journeymen Pipefitter - Construction Trades
UA Local 719 Plumbers And Pipefitters JATC
Fort Lauderdale, FL09-2022
Bachelor of Science - Construction Management
National University
San Diego, CA10-2029
Skills
Rigging
- Crane Signaling
- Blue-Print Reading
- Pipe Installation
- Communication
- Problem-Solving
- Adept to mastering new skills
- Laying out dimensions on blue prints
- Pipe fitting
- Revit
- 3D Modeling
- Worksite safety
- Project management
- Attention to detail
- Effective communication
- Dedicated work ethic
- Crew leadership
- Critical thinking
- OSHA compliance
- Blueprint interpretation
- HVAC systems
- Multitasking and organization
- Team mentoring
- Dependable and hardworking
Timeline
Pipefitter
ACCO Engineered Systems
04.2026 - Current
Quality Control Inspector
ACCO Engineered Systems
01.2026 - 04.2026
Pipefitter
Harris
08.2025 - 01.2026
Pipefitter Foreman
Pueblo Mechanical And Controls
06.2025 - 07.2025
Pipefitter Foreman
University Mechanical Contractors Inc.
10.2024 - 05.2025
Pipefitter
Southland Industries
03.2023 - 06.2024
Pipefitter
BMWC Constructors
09.2022 - 03.2023
UA Instructor
UA Local 719 Plumbers & Pipefitters
08.2021 - 08.2022
Pipefitting/Plumbing Apprentice
UA Local 719
07.2017 - 09.2022
High School Diploma -
Plantation High School
Journeymen Pipefitter - Construction Trades
UA Local 719 Plumbers And Pipefitters JATC
Bachelor of Science - Construction Management
National University
Roles And Responsibilities
Get to work on time, teach and mentor, follow company rules and procedures, follow break and lunch times, work safely, write or help with PTP's, install piping systems, laying out, reading blue prints, BIM and CAD 3D modeling.
Personal Information
Title: Journeymen Pipefitter
References
- Anthony Salgado, UA Local 719 Business Manager, (754)-244-5193)
- Brandon Burns Foreman Pipefitter (754)-367-1708
- Charles Lopez General Foreman(602)-430-4098
- Mike Berger Area Manager QA/QC (989)-488-0620
- Paul Lindofer General Foreman (763)-464-4868
- Daniel Ochoa General Foreman (480)-369-5671
Leadership Experience
Under my leadership I ran a 10 man crew at Intel Ocotillo in Chandler Arizona. I was in charge of running all the low purity piping systems for the Wet-etch tools inside the subfab and main fab. It was my job to delegate work efficiently and safely while communicating with Intel management personnel and also my company's management personnel. Under my leadership and with the help of my crew we were able to have had the highest turnover rate for completed tools within the company's specific scope of Wet-Etch tools.
The most up to date leadership experience I have is currently in Boise Idaho at Micron. I am in charge of running a PCW system that consist of heat exchangers, an air separator, multiple pumps and filters working with stainless steel pipe and tubing as our main piping material. With plenty of flanges and field welds to make I am responsible for keeping a weld log for every weld being made by a welder and a torque log with all the torqued flanges that have been completed. I stay in constant communication with my supervisors about material needed and any potential problems that may arise. With the majority of the main piping complete, punchlists items and trim out are the main focal point in this scope of work.
Communication Skills
Communicate with different trades, apprentices, journeymen, supervisors, safety personnel etc.
Roles And Responsibilities
Get to work on time, teach and mentor, follow company rules and procedures, follow break and lunch times, work safely, write or help with PTP's, install piping systems, laying out, reading blue prints, BIM and CAD 3D modeling.
Personal Information
Title: Journeymen Pipefitter
References
- Anthony Salgado, UA Local 719 Business Manager, (754)-244-5193)
- Brandon Burns Foreman Pipefitter (754)-367-1708
- Charles Lopez General Foreman(602)-430-4098
- Mike Berger Area Manager QA/QC (989)-488-0620
- Paul Lindofer General Foreman (763)-464-4868
- Daniel Ochoa General Foreman (480)-369-5671
Leadership Experience
Teaches apprentices the correct, safe and efficient way to install pipe. Help Foreman's, and General Foreman with ordering material, fittings, pipe etc.
Communication Skills
Communicate with different trades, apprentices, journeymen, supervisors, safety personnel etc.
Roles And Responsibilities
Get to work on time, teach and mentor, follow company rules and procedures, follow break and lunch times, work safely, write or help with PTP's, install piping systems, laying out, reading blue prints, BIM and CAD 3D modeling.
Personal Information
Title: Journeymen Pipefitter
References
- Anthony Salgado, UA Local 719 Business Manager, (754)-244-5193)
- Brandon Burns Foreman Pipefitter (754)-367-1708
- Charles Lopez General Foreman(602)-430-4098
- Mike Berger Area Manager QA/QC (989)-488-0620
- Paul Lindofer General Foreman (763)-464-4868
- Daniel Ochoa General Foreman (480)-369-5671