Summary
Overview
Work History
Education
Skills
Languages
Timeline
Generic

Carlos Negron

Edison,NJ

Summary

Enthusiastic Boilermaker offering 10 years of experience interpreting work orders and applying information to project needs. Strong work ethic, adaptability and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills. Promoting safety in every task. Sharp and highly trained with desire to work within heating/cooling sector.

Overview

14
14
years of professional experience

Work History

Boilermaker

Control System Services
Washingtonville, NY
07.2015 - Current
  • Installed and repaired boilers, pressure vessels, tanks, and other heavy metal fabrications.
  • Welded components in flat, vertical, or overhead positions.
  • Measured and marked cutting lines on material using a ruler or scribe.
  • Cut materials to size with torches and hand tools.
  • Assembled parts into complete units by welding them together.
  • Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.
  • Adjusted controls to generate specified electric power or steam output.
  • Cleaned boiler firetubes with wire brushes to remove soot deposits after shutdowns.
  • Installed insulation on pipes, tanks, and other mechanical systems.
  • Removed old insulation from pipes prior to installation of new insulation.
  • Tested equipment for proper operation following repairs or maintenance activities.
  • Maintained records of all repair work performed on boilers and related machinery.
  • Followed safety procedures when working around high-pressure systems.
  • Used oxyacetylene torch to cut through steel plate for fabrication purposes.
  • Replaced gaskets, valves, piping connections, and other components as needed.
  • Diagnosed problems with boilers and related equipment using technical manuals.
  • Operated cranes and hoists to move large objects during repair projects.
  • Assisted in the construction of new boilers from scratch according to customer specifications.
  • Followed safety procedures and protocols to minimize equipment mishaps.
  • Signaled to crane operator to lift components to specific positions.
  • Identified issues and brought to attention of foreman.
  • Managed movement of materials and equipment to different job sites.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
  • Used hoist to load structural parts of boilers, pressure vessels and tanks on pallets.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Cleaned pressure vessel equipment by using scrapers, wire brushes and cleaning solvents.
  • Assembled and checked each boiler for defects.
  • Mentored 18 apprentices and inspected finished work to verify compliance with established requirements.
  • Cut, formed and welded steel to make and repair metal components.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
  • Opened, cleaned and repaired pressure vessels.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Shaped seams, joints and irregular edges of pressure vessel sections and structural parts to attain specified fit of parts.

Safeguard Driver Guard/Messenger

Dunbar Armored
Kenilworth, NJ
04.2013 - 10.2015
  • Delivered packages to customers in a timely and efficient manner.
  • Inspected vehicles for mechanical items and safety issues, ensuring they are in proper working condition.
  • Maintained accurate logs of vehicle inspections and repair status.
  • Checked loads to ensure that cargo was secure and distributed evenly.
  • Followed all applicable traffic laws, regulations, and defensive driving techniques while operating company vehicles.
  • Verified the contents of inventory loads against shipping papers.
  • Provided excellent customer service by responding promptly to customer inquiries and complaints.
  • Loaded and unloaded goods from truck using hand-trucks or pallet jacks.
  • Ensured compliance with DOT regulations and other applicable laws governing transportation of cargo.
  • Prepared documents such as bills of lading, invoices, receipts, proof of delivery documents.
  • Monitored road conditions during trips to determine if any adjustments need to be made due to weather or traffic delays.
  • Communicated effectively with dispatchers regarding pick-ups and deliveries status updates.
  • Reported any incidents involving the truck or its cargo to management immediately.
  • Assisted with loading and unloading freight when necessary.
  • Adhered to company policies and procedures related to safety and security standards.
  • Participated in training sessions regarding safe driving practices and defensive driving techniques.
  • Conducted pre-trip inspections prior to departure including verifying load details and confirming route information.
  • Performed emergency roadside repairs such as changing tires or jump starting batteries when needed.
  • Delivered goods and services to customers on time and in excellent condition.
  • Inspected vehicles for cleanliness and checked gas and oil levels prior to departure.
  • Utilized GPS to optimize routes and continuously meet estimated delivery times.
  • Secured merchandise, avoiding damage during transportation.
  • Documented daily mileage, gas and other data.
  • Monitored traffic conditions and applied defensive strategies to avoid accidents.
  • Determined most expedient trip by mapping out driving routes ahead of time.
  • Achieved consistently high customer scores due to exceptional service.
  • Saved fuel by leveraging GPS to identify faster routes.
  • Drove trucks to and from job sites to deliver supplies.
  • Delivered customer orders and collected payments to keep accounts current.
  • Reviewed work orders to perform freight movement and deliveries.
  • Operated standard warehouse equipment to assist with loading and unloading of deliveries.
  • Interacted with customers pleasantly to meet needs and drive satisfaction.
  • Demonstrated professional conduct with clients to deliver outstanding customer service.
  • Checked vehicle after shift for damage.
  • Performed activities on time while maintaining regular attendance and punctuality to support scheduling and work coverage.
  • Loaded and unloaded merchandise efficiently to meet demanding route targets.
  • Coordinated with team members and remained flexible in work scheduling to meet service needs.

Boilermaker

American Quality Boiler Repair
Roselle Park, NJ
01.2010 - 05.2013
  • Installed and repaired boilers, pressure vessels, tanks, and other heavy metal fabrications.
  • Welded components in flat, vertical, or overhead positions.
  • Measured and marked cutting lines on material using a ruler or scribe.
  • Cut materials to size with torches and hand tools.
  • Assembled parts into complete units by welding them together.
  • Repaired worn or damaged parts of boilers, tanks, and vats by cutting out defective areas and replacing them with new plates or sections.
  • Adjusted controls to generate specified electric power or steam output.
  • Cleaned boiler firetubes with wire brushes to remove soot deposits after shutdowns.
  • Installed insulation on pipes, tanks, and other mechanical systems.
  • Removed old insulation from pipes prior to installation of new insulation.
  • Tested equipment for proper operation following repairs or maintenance activities.
  • Maintained records of all repair work performed on boilers and related machinery.
  • Followed safety procedures when working around high-pressure systems.
  • Used oxyacetylene torch to cut through steel plate for fabrication purposes.
  • Replaced gaskets, valves, piping connections, and other components as needed.
  • Diagnosed problems with boilers and related equipment using technical manuals.
  • Operated cranes and hoists to move large objects during repair projects.
  • Assisted in the construction of new boilers from scratch according to customer specifications.
  • Followed safety procedures and protocols to minimize equipment mishaps.
  • Signaled to crane operator to lift components to specific positions.
  • Identified issues and brought to attention of foreman.
  • Managed movement of materials and equipment to different job sites.
  • Examined boilers, pressure vessels, tanks and vats to locate leaks, weak spots and defective sections.
  • Analyzed specifications, diagrams and blueprints for each job.
  • Used welding and soldering equipment to join sheet metal components following blueprints and job specifications.
  • Used hoist to load structural parts of boilers, pressure vessels and tanks on pallets.
  • Requisitioned tools and equipment and selected type and size of pipes for transport to worksite.
  • Cleaned pressure vessel equipment by using scrapers, wire brushes and cleaning solvents.
  • Assembled and checked each boiler for defects.
  • Mentored 18 apprentices and inspected finished work to verify compliance with established requirements.
  • Cut, formed and welded steel to make and repair metal components.
  • Worked with team to lift heavy sections into place using rigging and signals.
  • Inspected and assembled tubes, fittings, valves, controls and auxiliary mechanisms to locate defects.
  • Opened, cleaned and repaired pressure vessels.
  • Installed manholes, handholes, taps, tubes, valves, gauges and feedwater connections in drums of water tube boilers.
  • Designed, installed and repaired boilers used to heat water for generating electric power or providing heat.
  • Prepared materials using plate shears, punch presses and bending rolls.
  • Shaped seams, joints and irregular edges of pressure vessel sections and structural parts to attain specified fit of parts.

Education

Criminal Justice

Union County College
Cranford, NJ

Skills

  • Material prepping
  • Installation and inspection
  • System Tests
  • Rigging
  • Cutting and threading
  • Demolition and dismantling
  • Component Installation
  • Repair work
  • Welding
  • Shielded Metal Arc Welding
  • Precision measuring
  • Pipefitting
  • Blueprint Interpretation
  • Safety Procedures
  • Equipment operations
  • Heavy Lifting
  • Metal cutting
  • Leak detection
  • Welding expertise
  • Code Compliance
  • Hand and power tools
  • Pipe cutting
  • Maintenance Scheduling

Languages

Spanish
Native/ Bilingual

Timeline

Boilermaker

Control System Services
07.2015 - Current

Safeguard Driver Guard/Messenger

Dunbar Armored
04.2013 - 10.2015

Boilermaker

American Quality Boiler Repair
01.2010 - 05.2013

Criminal Justice

Union County College

Similar Profiles

CREATE PROFILE
Carlos Negron