Carlos Vazquez

Similar Profiles

• Rohit RathorRohit Rathor

  <ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group<ul><li>Production Block Incharge Job Role: Operations, Control and Monitoring</li><li>1. All activities related to production and monitoring the process as per SOPs.</li><li>2. Communicate day to day process deviations and breakdowns of the equipment to concerned persons.</li><li>3. Check and implement the process for cleaning of equipment as per the schedules.</li><li>4. Responsible for housekeeping and implementation of day to day cleaning of process area & clean room.</li><li>5. Preparation, review and approval of monthly Reports and BPRs BCRs, OOS, Deviation, investigations reports, validation protocols reports, validation reports.</li><li>6. Responsible for preparation of daily production planning and ensuring the same.</li><li>7. Production planning, ensuring that the batches are produced as per planning and meeting the dispatch targets.</li><li>8. Ensure proper utilization of equipment and manpower as and when required.</li><li>9. Planning and monitoring during execution of the process validation.</li><li>10. Manpower planning. Monitor the project modification activities.</li><li>11. Responsible to handle production processes.</li><li>12. Implementation of new technology w.r.t. process equipments or facility.</li><li>13. Supporting quality assurance team for DMF submission.</li><li>14. Executing and supervising training, validation, qualification and calibrations protocols.</li><li>15. To perform visual inspection and certification of cleaned equipment after product change over cleaning as per standard operating procedure.</li><li>CGMP:</li><li>1. Following departmental standard operating procedures (SOP) and providing suggestions for SOP simplification and any other improvements.</li><li>2. Making sure all the documents and checklist are verified before and after manufacturing.</li><li>3. Ensuring retention and destruction of records are maintained in a department.</li><li>4. Verifying status labeling of accessories, in-process instruments, containers, area & equipment.</li><li>5. Performing contemporaneous (on time) document entries.</li><li>EHS:</li><li>1. Following Environment, Health and Safety policies and practices.</li><li>2. Making sure personnel health, hygiene and organization practices are followed.</li><li>3. To conduct risk analysis of product, system, equipment, process as per standard procedure.</li><li>Training</li><li>1. Attaining training as per training need and providing training to sub-ordinates through available software of Learning Management System (LMS).</li></ul> at MSN Group

• Iman Al ZaabiIman Al Zaabi

  Planning & Process Engineer at Nomac / Acwa PowerPlanning & Process Engineer at Nomac / Acwa Power

• Neeraj GargNeeraj Garg

  <ul><li>Company Overview: Group Company of PUIG, Spain</li><li>Team Leadership & Process Excellence: Organised the transformation of the Finance & Accounts function, establishing performance-driven goals, and embedding a culture of accountability and continuous improvement. Drove operational efficiency through process redesigns, SOP implementation and optimal resource deployment, leading to measurable improvements in turnaround time and accuracy.</li><li>Strategic Partnering with CXOs: Acted as a key advisor to the CEO, CFO, and other CXOs on business planning, pricing strategies, and business model pivots to support scale-up and profitability. Contributed to investor communications with data-backed insights to enhance stakeholder confidence and secure strategic funding.</li><li>Cross-Functional & Global Stakeholder Management: Functioned as the strategic finance business partner to cross-functional heads and the PUIG global finance team, aligning local execution with global financial strategies and compliance requirements.</li><li>ERP Transformation & System Automation: Led end-to-end ERP reimplementation to address system gaps, enforce role-based controls, and automate core finance processes—resulting in enhanced data accuracy, faster reporting and improved internal controls.</li><li>Costing, Inventory & Profitability Optimization: Designed and implemented plant-level costing models to ensure accurate COGS determination. Improved inventory management across pricing, consumption tracking, and aging analysis—enabling better working capital control and cost efficiency.</li><li>Manufacturing Finance & Statutory Compliance: Supervised end-to-end accounting for manufacturing operations and ensured full statutory compliance.</li><li>Financial Reporting, MIS & Profitability Analytics: Delivered accurate and timely monthly MIS reports, including P&L, Balance Sheet and KPI dashboards with deep-dive variance analysis across stores, business verticals, and geographies. Supported board-level decision-making through insightful presentations on financial health and business performance.</li><li>Budgeting, Forecasting & Business Planning: Led the Annual Operating Plan (AOP) and rolling forecasts, ensuring alignment with strategic objectives and market dynamics. Monitored key financial metrics to enable business decisions and proactive cost management.</li><li>Statutory, Internal & Tax Audit Management: Finalized standalone and consolidated financials under Ind AS and IFRS, ensured timely group reporting and compliance with international standards. Delivered clean and timely closures of statutory, tax, and internal audits in coordination with Big 4 auditors. Strengthened audit readiness through pre-audit diagnostics and rectification of recurring control gaps.</li><li>Regulatory Compliance & Risk Management: Ensured end-to-end compliance which includes ROC, RBI, FEMA, Income Tax, GST, Transfer Pricing, DTAA, and Customs. Reviewed cross-border contracts and transactions to ensure arm’s length pricing, accurate TDS application, and proper documentation under Transfer Pricing regulations.</li><li>Commercial Negotiation & Contract Governance: Led commercial negotiations and structured deals with vendors and franchisees. Reviewed key business contracts to ensure financial viability, risk protection, and compliance with regulatory standards.</li><li>Treasury & External Commercial Borrowing (ECB): Managed fund planning and liquidity management including ECB drawdowns, bank negotiations, and interest optimization. Improved working capital cycles through proactive cash flow forecasting and receivables control.</li><li>Internal Controls & Governance Framework: Led organization-wide reviews of internal control systems, identified process gaps, and redesigned or implemented over 40 SOPs and IFCs. Established a governance structure for financial discipline, risk mitigation, and policy compliance across departments.</li></ul> at Kama Ayurveda Pvt. Ltd. & PUIG India Pvt. Ltd.<ul><li>Company Overview: Group Company of PUIG, Spain</li><li>Team Leadership & Process Excellence: Organised the transformation of the Finance & Accounts function, establishing performance-driven goals, and embedding a culture of accountability and continuous improvement. Drove operational efficiency through process redesigns, SOP implementation and optimal resource deployment, leading to measurable improvements in turnaround time and accuracy.</li><li>Strategic Partnering with CXOs: Acted as a key advisor to the CEO, CFO, and other CXOs on business planning, pricing strategies, and business model pivots to support scale-up and profitability. Contributed to investor communications with data-backed insights to enhance stakeholder confidence and secure strategic funding.</li><li>Cross-Functional & Global Stakeholder Management: Functioned as the strategic finance business partner to cross-functional heads and the PUIG global finance team, aligning local execution with global financial strategies and compliance requirements.</li><li>ERP Transformation & System Automation: Led end-to-end ERP reimplementation to address system gaps, enforce role-based controls, and automate core finance processes—resulting in enhanced data accuracy, faster reporting and improved internal controls.</li><li>Costing, Inventory & Profitability Optimization: Designed and implemented plant-level costing models to ensure accurate COGS determination. Improved inventory management across pricing, consumption tracking, and aging analysis—enabling better working capital control and cost efficiency.</li><li>Manufacturing Finance & Statutory Compliance: Supervised end-to-end accounting for manufacturing operations and ensured full statutory compliance.</li><li>Financial Reporting, MIS & Profitability Analytics: Delivered accurate and timely monthly MIS reports, including P&L, Balance Sheet and KPI dashboards with deep-dive variance analysis across stores, business verticals, and geographies. Supported board-level decision-making through insightful presentations on financial health and business performance.</li><li>Budgeting, Forecasting & Business Planning: Led the Annual Operating Plan (AOP) and rolling forecasts, ensuring alignment with strategic objectives and market dynamics. Monitored key financial metrics to enable business decisions and proactive cost management.</li><li>Statutory, Internal & Tax Audit Management: Finalized standalone and consolidated financials under Ind AS and IFRS, ensured timely group reporting and compliance with international standards. Delivered clean and timely closures of statutory, tax, and internal audits in coordination with Big 4 auditors. Strengthened audit readiness through pre-audit diagnostics and rectification of recurring control gaps.</li><li>Regulatory Compliance & Risk Management: Ensured end-to-end compliance which includes ROC, RBI, FEMA, Income Tax, GST, Transfer Pricing, DTAA, and Customs. Reviewed cross-border contracts and transactions to ensure arm’s length pricing, accurate TDS application, and proper documentation under Transfer Pricing regulations.</li><li>Commercial Negotiation & Contract Governance: Led commercial negotiations and structured deals with vendors and franchisees. Reviewed key business contracts to ensure financial viability, risk protection, and compliance with regulatory standards.</li><li>Treasury & External Commercial Borrowing (ECB): Managed fund planning and liquidity management including ECB drawdowns, bank negotiations, and interest optimization. Improved working capital cycles through proactive cash flow forecasting and receivables control.</li><li>Internal Controls & Governance Framework: Led organization-wide reviews of internal control systems, identified process gaps, and redesigned or implemented over 40 SOPs and IFCs. Established a governance structure for financial discipline, risk mitigation, and policy compliance across departments.</li></ul> at Kama Ayurveda Pvt. Ltd. & PUIG India Pvt. Ltd.

• Mahmoud ZaeiterMahmoud Zaeiter

  Civil Engineer - Junior Project Engineer/Planning and Construction Department at Ontario Transit GroupCivil Engineer - Junior Project Engineer/Planning and Construction Department at Ontario Transit Group