Summary
Overview
Work History
Education
Skills
References
Timeline
Generic

Carmen Biscaino

Lovington,NM

Summary

I am pursuing a career that will allow me to expand my options and open up new doors for better opportunities. I have been in the oil field industry since 2005. I am positive that I would be asset to your company. My experience is in different areas of the oil field such as production enhancement to completion tools. These different opportunities have allowed me to be more versatile in the oil and gas industry.. My experiences over the years have allowed me the ability to work with others as part of a team or to perform job tasks on my own taking the initiative to get the work completed.

Overview

26
26
years of professional experience

Work History

Hot Oiler Operator

Crain Hot Oil Service
Lovington, NM
10.2022 - Current
  • Comply with all D.O.T. regulations.
  • Hot Oil wells to keep rod pumps in good working condition and production flowing. Treat oil tanks with heat along with chemicals to clear out water and other BS from oil.
  • Flush oil thru Lact units at high temps to clean up lines going to and from unit.
  • Flush flow lines and pipelines at batteries to unplug lines.
  • Flush tubing with hot water to clean up tubing from paraffin before installing rod pump and rods.
  • Load/Test wells to check pump action or if tubing is in bad condition.

Operation Specialist 2

Champion X
Hobbs, NM
10.2020 - 10.2022
  • Chemical treating of all scheduled wells and locations on a regular basis
  • Maintain chemical inventory reports
  • Present a professional manner and work closely with sales people to satisfy customer requirements
  • Maintain regular communication with sales and supervisor in order to report field problems and/or safety hazards
  • Maintain truck and equipment in a safe and operable condition at all times by performing daily and periodic mechanical and safety inspections
  • Maintain driver's hours of service by using Turnpike and/or paper logbook reporting
  • Keep current on safety techniques and take advantage of all opportunities to improve driving and safety skills
  • Recognize and avoid safety hazards in the work environment
  • Properly load trucks, prepare daily bills of lading, schedule the order of daily treatments and submit treating reports to sales
  • Safeland/PEC
  • H2S Training
  • Lock Out / Tag Out Training
  • Defensive Driver Training
  • First Aid Responder
  • Forklift Certified
  • HAZMAT Certified

Service-Specialist Completion Tools

Halliburton
Odessa, TX
04.2014 - 04.2020
  • Oversaw the installation of the complex well completion products in the geographic area
  • Typically operated as a one-person crew
  • Accountable for onsite customer satisfaction with job execution and interpersonal interaction
  • Consulted with customers concerning products and services, promoted good customer relations at the well site, and insured customer satisfaction with results
  • Reviewed the job design and confirmed that the job packet included the proper equipment and processes to achieve the job purpose
  • Identified any additional contingencies that should have been provided for
  • Performed all aspects of the job in compliance with HMS processes
  • Applied technical knowledge to solve unanticipated situations, and consulted with HES operations base as needed
  • Demonstrated knowledge of pre and post-job product and service activities-varies by location
  • Properly maintained assigned equipment and monitors compliance with safety regulations and procedures
  • Interacted with third parties whose activities could have impacted the process of installing completion products to assure proper coordination
  • Trained service operators in areas of expertise
  • Promoted safety awareness and environmental consciousness, and complied with all applicable health, safety and environmental procedures and regulations
  • Conducted and documented all HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc
  • Promoted and took an active part in the quality improvement process
  • Able to use computer and applications
  • Such as Word, Excel, Power Point
  • Able to perform basic math calculations and downhole pressures
  • Set packers with mechanic or hydraulic setting tools
  • Safeland/PEC
  • H2S training
  • Lock out/Tag out training
  • Defensive Driving Training
  • First aid responder training
  • Forklift Driver

Safety Consultant

DXP Safety Services
Hobbs, NM
02.2011 - 04.2014
  • Ensured all contractors that arrived on Chevron locations were in compliance and in accordance with OSHA regulations as well as properly qualified for the job task to be performed
  • Inspected third party equipment to ensure that it was in good condition and safe enough to use
  • The equipment ranged from wire-line equipment to cement, Frac, coil tubing, B.O.P
  • Equipment, and cranes that arrived on location
  • Completed rig inspections to ensure rigs were in compliance and performed weekly safety drills with rig crews which included B.O.P
  • H2S & Fire Evacuation, Environmental, and Derrick Rescue drills
  • Completed permits for hotwork, critical lifting, excavations, confined space entry, and lock out tag out
  • Coached contractors on how to complete their job tasks safely by conducting safety meetings and assisting them with their Job Safety Analysis (JSA)
  • Instructed contractors on how to use the Tenets of Operation and how to use Stop Work Authority (SWA)
  • I worked in Eunice NM FMT for Chevron and also the Vacuum FMT also for Chevron in Buckeye NM
  • Working alongside the Well Site Managers here in Buckeye allowed me to learn and have a better understanding of well control and day to day operations
  • Due to Chevron cutting their budget unfortunately our company was released

Vacuum/Kill Truck Driver

Nabors Well Service
Hobbs, NM
08.2007 - 02.2011
  • Drove a commercial vehicle in accordance with D.O.T
  • Regulations
  • Delivering fluids to locations to kill gas coming from well-bore
  • Hauling off excess fluids to disposals to avoid spills on locations
  • I hauled fluids for acid jobs, cement jobs, and pumped chemical squeezes for Chevron
  • While on location I would be in compliance with OSHA regulations and communicate with contractors on location to reduce the hazards between myself and other contractors on location
  • I worked for Chevron in Eunice NM my first year and in Buckeye NM my last three years before going to work for DXP

Blender Tender Operator

BJ Services
Hobbs, NM
02.2005 - 08.2007
  • Drove a commercial vehicle in accordance with DOT regulations
  • I operated a blender and it was my responsibility to ensure the blender was programmed and operated according to what job type we were pumping
  • I had to check the gel water for the right viscosity and ensure that the sand being used was the right weight whether the job was a stair step or a ramp stage Frac
  • I also pumped various chemicals along with the gel and sand to fracture well formations at rates of 35 bbl a minute at 4,000 psi to 80 bbl a minute at around 9,000 psi

Floor-Hand

McVay Drilling Company
Hobbs, NM
01.2005 - 12.2005
  • Made drill pipe connections
  • Operated tongs, spinning chain and pipe spinners
  • I was able to work on a rig with a top drive
  • Worked with casing crews when we would run casing
  • I would operate a forklift to move pallets of mud mix to mud house
  • Helped with mud mixing and mixing of caustic in steel pits and also would monitor returns while circulating
  • I would operate the air hoist when lifting heavy objects up to rig floor

Production Supervisor

Lea County Cheese Plant (DFA)
Lovington, NM
09.1999 - 12.2004
  • Supervised production process and was supervisor to over 50 employees
  • Kept records of production quantity
  • Supervised sanitation during clean up and did inspections after clean up was completed
  • Met with U.S.D.A annually to review quality control and do complete system inspections throughout the entire factory
  • I was supervisor from 2002-2004

Education

High School Diploma -

Lovington High School
Lovington, NM
05.1995

Skills

  • Equipment monitoring
  • Equipment safety
  • Lubrication options
  • Schematic reading
  • Repairs understanding
  • Maintenance expertise

References

  • Robert Gonzalez, Operational Specialist II, Nalco Champion, Hobbs, NM, 88240, (432)-385-8631
  • George Dima, Service Specialist, Halliburton Completion Tools, 6155 W Murphy, Odessa, TX, 79763, 701-609-7636
  • Pedro Hernandez, Mewbourne Oil Frac Consultant, Hobbs, NM, 88240, 575-441-4678
  • Gary R. Carr Jr., New Mexico Territory Manager, Longhorn Tubular Services, Hobbs, NM, 88240

Timeline

Hot Oiler Operator

Crain Hot Oil Service
10.2022 - Current

Operation Specialist 2

Champion X
10.2020 - 10.2022

Service-Specialist Completion Tools

Halliburton
04.2014 - 04.2020

Safety Consultant

DXP Safety Services
02.2011 - 04.2014

Vacuum/Kill Truck Driver

Nabors Well Service
08.2007 - 02.2011

Blender Tender Operator

BJ Services
02.2005 - 08.2007

Floor-Hand

McVay Drilling Company
01.2005 - 12.2005

Production Supervisor

Lea County Cheese Plant (DFA)
09.1999 - 12.2004

High School Diploma -

Lovington High School

Similar Profiles

CREATE PROFILE
Carmen Biscaino