Casey Lynch

* Hold a Class A CDL. Endorsements NT. Heavy Haul experience.

* Operated and Supervised Wireline/Frac Pump Downs, Toe Preps, Coil Assist, Fishing Processes, Acidizing Work, Well Stimulation, Drillouts using Snubbing Units and Workover Rigs as well as rigging in Nitrogen Units for a better return rate.

* Operated and Supervised Pump Operating systems including, PRIME, MDT, SERVA, LIME, CONCEPT CONTROLS on 2250 to 2500 HP Frac Pumps, Tub Pumps, Double Pumpers. Operated other control systems operating skid pumps.

* Built, Operated and Supervised Costumer specific rig ups, flowback and Bleed Offs according to the process and Company Safety Specifications.Streamlined workflow processes for improved efficiency in the management of pump systems, rig ups and specified processes determined by the Company providing services to.

• Optimized pump performance through regular inspection, preventative maintenance, cleaning, and lubrication of equipment components.
• Stayed calm and focused in emergency situations to provide efficient fixes for diverse mechanical and pressure issues.
• Ensured continuous operation of pumps by monitoring system performance and addressing issues promptly.
• Monitored pump rate, suction pressure, engine gauges and flowmeters and inspected equipment to verify fluid levels, temperatures and pressures remained at specified levels, reporting abnormalities as necessary.
• Corrected unsafe conditions or practices immediately upon recognition to eliminate workplace accidents.
• Improved customer satisfaction with timely response to inquiries, addressing concerns, and finding effective solutions.
• Troubleshot and repaired day-to-day operational issues to keep productivity levels high and prevent safety hazards.
• Managed emergency situations effectively, minimizing damage to equipment and ensuring safety at all times.
• Conducted daily inspections of surface equipment and pumps to identify and address worn valves, seats, packing and seal leaks, improper priming and other minor operational inefficiencies.
• Conducted comprehensive testing procedures to verify proper functioning of newly installed or repaired pump systems before returning them to service.

* Hold a Class A CDL. Endorsements NT. Heavy Haul experience.

* Operated and Supervised Wireline/Frac Pump Downs, Toe Preps, Coil Assist, Fishing Processes, Acidizing Work, Well Stimulation, Drillouts using Snubbing Units and Workover Rigs as well as rigging in Nitrogen Units for a better return rate.

* Operated and Supervised Pump Operating systems including, PRIME, MDT, SERVA, LIME, CONCEPT CONTROLS on 2250 to 2500 HP Frac Pumps, Tub Pumps, Double Pumpers. Operated other control systems operating skid pumps.

* Built, Operated and Supervised Costumer specific rig ups, flowback and Bleed Offs according to the process and Company Safety Specifications.Streamlined workflow processes for improved efficiency in the management of pump systems, rig ups and specified processes determined by the Company providing services to.Managed emergency situations effectively, minimizing damage to equipment and ensuring safety at all times.

• Conducted comprehensive testing procedures to verify proper functioning of newly installed or repaired pump systems before returning them to service.
• Streamlined workflow processes for improved efficiency in the management of pump systems, rig ups, safety and the specified process the Company requires for that Location
• Optimized pump performance through regular inspection, cleaning, preventative maintenance and lubrication of equipment components.
• Ensured continuous operation of pumps by monitoring engine and pump system performance and addressing issues promptly.
• Corrected unsafe conditions or practices immediately upon recognition to eliminate workplace accidents.
• Adapted quickly to new technologies introduced into the field of pump operation, integrating them seamlessly into existing workflows.
• Troubleshot and repaired day-to-day operational issues to keep productivity levels high and prevent safety hazards.
• Facilitated timely repairs by maintaining an organized inventory of spare parts and tools required for servicing pumps.
• Conducted daily inspections of surface equipment and pumps to identify and address worn valves, seats, packing and seal leaks, improper priming, air locks and other minor operational inefficiencies.
• Provided exceptional customer service by addressing client concerns promptly and professionally while seeking opportunities for improvement in pump service delivery methods.
• Enhanced workplace safety by adhering to industry standards and company guidelines during all operations.
• Improved pump system efficiency by conducting regular maintenance and repairs.
• Monitored all engine, power end, fluid end gauges and flowmeters and inspected equipment to verify fluid levels, temperatures and pressures remained at specified levels, reporting abnormalities as necessary.
• Maintained safe and accurate pump levels and closely watched pump gauges.
• Kept shop workspaces and various fieldwork locations clean and organized for maximum productivity.
• Stayed calm and focused in emergency situations to provide efficient fixes for diverse mechanical problems.
• Improved customer satisfaction with timely response to inquiries, addressing concerns, and finding effective solutions.
• Generated reports detailing daily operations, findings, corrective actions taken and recommendations.

* Hold a Class A CDL. Endorsements NT. Heavy Haul experience.

* Operated and Supervised Wireline/Frac Pump Downs, Toe Preps, Coil Assist, Fishing Processes, Acidizing Work, Well Stimulation, Drillouts using Snubbing Units and Workover Rigs as well as rigging in Nitrogen Units for a better return rate.

* Operated and Supervised Pump Operating systems including, PRIME, MDT, SERVA, LIME, CONCEPT CONTROLS on 2250 to 2500 HP Frac Pumps, Tub Pumps, Double Pumpers. Operated other control systems operating skid pumps.

* Built, Operated and Supervised Costumer specific rig ups, flowback and Bleed Offs according to the process and Company Safety Specifications.

• Managed emergency situations effectively, minimizing damage to equipment and ensuring safety at all times.
• Optimized pump performance through regular inspection, preventative maintenance, cleaning, and lubrication of equipment components.
• Ensured continuous operation of pumps by monitoring the engine, power end, fluid end system performance and addressing issues promptly.
• Corrected unsafe conditions or practices immediately upon recognition to eliminate workplace accidents.
• Troubleshot and repaired day-to-day operational issues to keep productivity levels high and prevent safety hazards.
• Facilitated timely repairs by maintaining an organized inventory of spare parts and tools required for servicing pumps.
• Conducted daily inspections of surface equipment and pumps to identify and address worn valves, seats, packing and seal leaks, improper priming, air locks and other minor operational inefficiencies.
• Reduced downtime with proactive identification of potential problems and implementing preventive measures.
• Enhanced workplace safety by adhering to industry standards and company guidelines during all operations.
• Monitored pump rate, PR pressure, suction pressure, lube pressure and all gauges and flowmeters and inspected equipment to verify fluid levels, temperatures and pressures remained at specified levels, reporting abnormalities as necessary.
• Communicated with other workers using signals, radios or telephones to start and stop flows of materials or substances.
• Stayed calm and focused in emergency situations to provide efficient fixes for diverse mechanical problems.
• Improved customer satisfaction with timely response to inquiries, addressing concerns, and finding effective solutions.
• Demonstrated commitment to the organization''s core values, leading by example and fostering a culture of excellence.
• Oversaw compliance with industry regulations and company policies, ensuring safe and legal operational environment.
• Generated daily job reports detailing findings, corrective actions and recommendations.

• Performed Maintenance on the Fluid End and Power End. Changed valves, seats, springs, packing, seals, wedding bands, plungers when needed. Made sure the power end Lube Reservoir stayed correctly filled.
• Performed Scheduled Preventative Maintenance on engines , Drain engine oil, Trans oil, changed Fuel and Oil filters, change Water/Fuel Separator filters, Air Filters and put new oils in according to the engine type and specs.
• Ensured continuous operation of pumps by monitoring system performance and addressing issues promptly.
• During Operational hours I would walks the Pumps checking for leaks, listening for abnormal noises and feeling the fluid end and power end for knocks and unwanted vibrations. Also checking fluid levels once an hour.
• Depending on the process or service being provided i would work the Valves, bleeds, and Actuators. Also working the Valves off Frac Tanks when necessary and would also run Valves during acid work.
• Rigged Up 2" & 3" Iron and fittings, Whatever service we were providing would determine what the Company Safety Standard is for that process and what the Pump Rate and Working Pressure will be during operations.
• Rig Down Iron after completion of job and clean, organize and load to move to next job or location.
• Learn the operations being used, good communication, hand signals, maintenance, and the safe operations of running the pump and knowing its limitations and how to get out of bad situations during pumping if they arise or occur.
• STAY OUT OF REDZONES!
• Corrected unsafe conditions or practices immediately upon recognition to eliminate workplace accidents.
• Enhanced workplace safety by adhering to industry standards and company guidelines during all operations.

* Qualified 6G SMAW Welder by the Oklahoma Labor Commission. I was also certified at Cimarron Energy to Weld SMAW, GMAW, FCAW, and SAW on any code vessel or piping adhering to X-Ray and high pressure testing.

* Code Department Supervisor for four years before becoming Manufacturing Manager.

* Reviewed ISO's, Blueprints, made necessary changes with approval from Engineers

* Led daily safety meetings and oversaw our Monthly employee safety meeting.

* Made sure deadlines were met and targeted budgets were maintained throughout the process of each individual unit built for that specific company

• Conducted root cause analysis investigations to identify areas for improvement in manufacturing processes, leading to increased efficiency and fewer defects.
• Enhanced product quality by performing regular audits, enforcing strict adherence to industry standards, and implementing corrective actions when necessary.
• Enforced health and safety protocols to promote safe working environment.
• Evaluated employee performance and provided feedback and training as needed.
• Trained in and implemented emergency response procedures to protect team members and property.
• Maintained clean working environment by consistently organizing tools and equipment, promoting workplace safety.
• Inspected welds and checked critical measurements to meet specifications.
• Operated hoists, cranes, and power tools to dismantle equipment to find and remove defective parts.
• Removed and repaired unacceptable welds with air arc and grinder to meet quality guidelines.
• Collaborated with team members for seamless project execution, improving overall productivity.
• Streamlined work processes through effective communication with supervisors and team members about project requirements and progress updates.
• Improved project completion times by streamlining welding processes for structural components.

* Graduated Duncan High School 1991

* 1991 Southwest Oklahoma Senior Bowl

* 1991 4A Golf State Champions

* 1991 4A Golf All Stater

* 74 hrs. of College credits completed at Northeastern State University

• Honor Roll Fall 1991 & Spring 1992 Northeastern State University
• Awarded a dual scholarship in Football & Golf to Northeastern State University
• 2011 Vocational Training in Welding
• 2011 Certified by Oklahoma Department of Labor for Passing my 6G SMAW
• 2024 Certified as a CPWI (Certified Pipeline Welding Inspector)