CESAR TITONG
Salem,USA
Summary
Waveform designer, Commissioning Engineer and construction in the Oil & Gas, Health care Facilities, Telecommunication and Power Stations industries with over 19 + years of experience (Domestics and Overseas) implementing successful programs projects and solutions incorporating a wide variety of technologies and applications. Seeking responsible position as an Electro Mechanical Engineer to utilize my experience in a renowned organization. In addition, my Electronics and communication background can be a big advantage in dealings with instrumentation process control.
Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Demonstrates strong analytical, communication, and teamwork skills, with proven ability to quickly adapt to new environments. Eager to contribute to team success and further develop professional skills. Brings positive attitude and commitment to continuous learning and growth.
Overview
44
44
years of professional experience
Work History
Waveform Designer
Eink Corporation
08.2013 - 08.2024
- Worked as waveform designer to customize waveform in eliminating ghosting and graytones into right perspective active matrix display platforms inspired innovative design
- Run process calibration of multiplex machine and validate radiometric cameras to meet the optimum functions of the system softwares
- Performed fresh updates of softwares for use on certain project involve and correct and interpret error issues in the system crash notifier
- Conduct and develop playback experiment projects in collecting the right waveform data analysis
Production Engineering Technician
GE Health Care
01.2012 - 11.2012
- Receiving of document for inspection of project specification prior to collections of materials lot and distributions to assembly technician
- Close supervision during the Assembly process to determine the proper methods and sequence of operation in Performing wiring, component installation, cable harnessing and set ups to Adjustment to holding tolerance design product specifications
- Perform critical repairs on recalled components from field service engineer which involved instrumentation test and repairs as manufacturer’s warranty
- Performed a wide variety of electronic or electro-mechanical assembly operations on assemblies or sub-assemblies
- Determines and/or follows methods and sequence of operations in performing wiring, component installation, hand soldering and cable harnessing on assembly units
- Makes setups and adjustments holding tolerances to blueprint specifications
- Responsible for different type of cable / cabling assembly which are used for MRI components and accessories on both video and audio I/O
- Receive documents from team lead and study every detail instruction prior to assembly
- Review printed drawings prior to assembly
- Collect additional parts needed
- Assembled different electronics components for MRI machines
- Able to assembled with critical soldering process
- Critical repairs or reworks on every recalled component from field service engineering
- Involved with the used of test instrument in repairs / trouble shooting analysis
- Soldering Certification – April 2011
Test Technician and Assembler
EMD Millipore
08.2011 - 01.2012
- Study blueprint/drawing plans, inspect and check each material and proceed to first peace article assembly
- Perform leak test for documentation of every first peace article assembly prior to whole order lot assembly
- In some cases, act as a team leader on a team cell assembly job assignment
- Handling different types of automated and manual machines
Self Employed
06.2005 - 01.2011
- Company Overview: General Contractor
- Projects on house wiring/re – wiring, Electrical panel and breakers replacement
- Bathroom restoration / Plumbing relocation Full basement construction
- Coordinate with city inspectors for rough and final inspection and approval of the projects
- General Contractor
Utility Service Aide - Main O/R
Salem Hospital
01.2003 - 01.2005
- Responsible for re-set rooms post-surgery with preparation of OR bed for the next procedure plus instruments completion on next cases
- Adhere to correct procedures in providing clean and sanitized rooms for the next surgery case and cleaning instruments
- Made beds; maintained cleanliness of surgery rooms, equipment and work areas
- Performed direct care related duties as assigned such as turn, reposition, transfer, or lift the patients, and picked up blood orders from medical laboratory
Project Commissioning Engineer / Site Manager
Royal Saudi Air Defense Force
12.1999 - 04.2002
- Siemens Gas Turbines 25 MW, Cummins Detroit Diesel Power Generator, Steam Boiler Plants and HVAC – Chillers Central A/C, Water Treatment of Chilled Water and Boilers
- Reverse Osmosis Plant Operation for Domestic consumption
- Commission and oversee the installation of systems, Plants and equipment
- Maintained access database for 1000+ instruments and maintained project schedule and develop project documentation such as detail design specifications and training materials
- Take part in supervision installation of all Rotating and Reciprocating equipment on HVAC accessories and Chillers
- Testing of equipment to make sure they function correctly and produce the expected results
- Coordinated the testing and commissioning activities and providing advice on testing of procedures and documentations
- Monitoring progress, recorded all test results parameters, witnessing final testing and acceptance of equipment
- Ensuring the safe testing and commissioning of all plant’s equipment and accessories
- Always make it sure all systems are designed, installed, tested, operated and maintained according to standard operation procedures as per requirements of the owner or client
Hospital / Commissioning Plant Engineer
Makkah Medical Center
09.1996 - 03.1999
- Commissioning and Testing of all Plants Equipment and accessories of 375 Bed Capacity First Class Hospital
- Commissioned and installed to operational functions all Plants equipment instrumentation and accessories to standard operational condition according to Documents specifications with the adjusted parameters to meet the specified tolerance from the standard codes prior to turn over of project to client or owner
- Equipment is here as follows: Steam Boiler and Water Treatment Plant, Reverse Osmosis Plant for Kidney Dialysis, Vacuum and Medical Gas Plants and Compressors, Power Station Plant and Switchgears Station, HVAC and Chiller Plant, Sprinkler Fire Water Station and High Pressures Pumps, Building Management System (BMS)
- Prepared and implemented a Policy and Procedure (PNP) for Operation and Maintenance of the Plants and Corrective & Preventive Maintenance operation Documents and handed over to clients or owner of the Medical Center
Chief Mechanical Engineer / Plant Commissioning Engineer
Ministry of Health Jeddah Saudi Arabia
05.1993 - 07.1996
- Commissioning and Testing to Operate transfer contract of all Plants and Equipment
- Power Plant Station and Switch Gears Electrical Station, Steam Boiler and Water Treatment Plant, Sewage Treatment Plant and Process Control Room, Reverse Osmosis and Pumping Station, Chiller Farms and HVAC
- Study all Documentations and Plants specifications and design and meeting with clients to discuss possible target turnover of project
- Involve in procurements of emergency materials and special tools if needed
- Conducting site inspection with P&ID /PFD to ensure the right positioning and technical aspect are in orders
- Commissioning and Final testing of Plants prior to turnover and parameters adjustment to required level + or – in tolerance as per standards specification of codes
Project Plant Engineer for Operation
Saudi Telecom and Telegraph
10.1983 - 02.1993
- Study on site prior and documentation of project implementation
- Reviews on design drawing and specifications of equipment and accessories involve on power station project
- Set up schedule for moving of equipment to start up
- Involve in coordination on Manufacturer O&M representative during commissioning
- Supported all commissioning and start up activities on both Caterpillar and Cummins Diesel Generators
- Check all requirements on UPS control system to avoid interruption of Power supplies on Data centers and Telecom Towers
- Coordinate with other commissioning discipline (advance control system, Instrumentation) to start up, test and trouble shoot multiple integrated plant system
Oil & Gas Junior Engineer tech.
Pilipinas Shell Petroleum Company
03.1980 - 09.1983
- Involve in O&M to all Rotating Equipment with Preventive and Corrective Maintenance with a priority on multiple stage pumps, Separators, Gas Turbine, Motorize valves, Compressors and minor diesel generators
- Make sure on all plants are on hourly checked on every daily normal operation and documented every parameter and technical analysis is logged
- Engage in repair and replace of scheduled shot down equipment
- Safety is the goal of the team every time on routine for technical inspection and analysis of equipment
Education
Degree - Electronics and Communication Engineering
ITT Technical Institute
Wilmington, MA06.2014
Diploma - Steam Power Plant Operation
Peterson School of Engineering
Woburn, MA06.2005
Degree - Mechanical Engineering Technology
Don Bosco Technical College
10.1983
Skills
- Teamwork skills
- Layout design
- Concept development
- Computer literate
Timeline
Waveform Designer
Eink Corporation
08.2013 - 08.2024
Production Engineering Technician
GE Health Care
01.2012 - 11.2012
Test Technician and Assembler
EMD Millipore
08.2011 - 01.2012
Self Employed
06.2005 - 01.2011
Utility Service Aide - Main O/R
Salem Hospital
01.2003 - 01.2005
Project Commissioning Engineer / Site Manager
Royal Saudi Air Defense Force
12.1999 - 04.2002
Hospital / Commissioning Plant Engineer
Makkah Medical Center
09.1996 - 03.1999
Chief Mechanical Engineer / Plant Commissioning Engineer
Ministry of Health Jeddah Saudi Arabia
05.1993 - 07.1996
Project Plant Engineer for Operation
Saudi Telecom and Telegraph
10.1983 - 02.1993
Oil & Gas Junior Engineer tech.
Pilipinas Shell Petroleum Company
03.1980 - 09.1983
Diploma - Steam Power Plant Operation
Peterson School of Engineering
Degree - Mechanical Engineering Technology
Don Bosco Technical College
Degree - Electronics and Communication Engineering
ITT Technical Institute
Similar Profiles
Rebecca BolnerRebecca Bolner
Coordinating Center Associate at United United BioSource Corporation CorporationCoordinating Center Associate at United United BioSource Corporation Corporation
Sandhya YSandhya Y
System Supervisor at Karnataka State Road Transport Corporation(KSRTC) & Bengaluru Metropolitan Transport CorporationSystem Supervisor at Karnataka State Road Transport Corporation(KSRTC) & Bengaluru Metropolitan Transport Corporation
MARK ANTHONY T. MANALOMARK ANTHONY T. MANALO
Chief Cook at Bright Maritime Corporation (Principal: Evalend Shipping Corporation)Chief Cook at Bright Maritime Corporation (Principal: Evalend Shipping Corporation)
FAY J. REESERFAY J. REESER
SharePoint Front-End Developer at Oregon Health Authority Public Health DivisionSharePoint Front-End Developer at Oregon Health Authority Public Health Division
Syed Raheel RizviSyed Raheel Rizvi
Family Intervention Specialist at Youth VillagesFamily Intervention Specialist at Youth Villages