Summary
Overview
Work History
Education
Skills
Timeline
Generic

Charles Berrios

Clarksville,TN

Summary

Certified Industrial Electrical Maintenance Technician through Tennnessee College Of Applied Technology. With 8 years experience in residential and commercial electrical installation, remodeling, repairs, etc.

Overview

8
8
years of professional experience

Work History

Electrician

Electirician, GED ELECTRIC
07.2021 - 06.2023
  • Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
  • Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
  • Performed routine and complex maintenance and repairs on various electrical equipment.
  • Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
  • Installed ground leads and connected power cables to equipment.
  • Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
  • Inspected worksites and installations to verify compliance with state safety codes.
  • Troubleshot and repaired malfunctioning systems and components.
  • Connected wires to circuit breakers, transformers or other components.
  • Replaced and repaired lighting fixtures and electrical control and distribution equipment.
  • Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
  • Followed state and local building regulations based on National Electrical Code.
  • Spliced, joined and connected wire to fixtures and other electrical components.
  • Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
  • Examined electrical units for loose connections and broken insulation.
  • Installed 120/208 volt systems and 347/600 volt systems.

Electrician Archer Electric, Residential Electrician

ElectriCare, Inc
05.2020 - 07.2021
  • Commercial, Industrial, Residential, Kody Electrical
  • Commercial and Residential electrical work.
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
  • Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
  • Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
  • Performed routine and complex maintenance and repairs on various electrical equipment.
  • Installed ground leads and connected power cables to equipment.
  • Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
  • Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
  • Stored and maintained power tools and equipment for each job.
  • Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
  • Repaired or replaced wiring, equipment and fixtures using hand tools and power tools.
  • Troubleshot and repaired malfunctioning systems and components.
  • Connected wires to circuit breakers, transformers or other components.
  • Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
  • Replaced and repaired lighting fixtures and electrical control and distribution equipment.
  • Followed state and local building regulations based on National Electrical Code.
  • Spliced, joined and connected wire to fixtures and other electrical components.
  • Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
  • Installed 120/208 volt systems and 347/600 volt systems.
  • Examined electrical units for loose connections and broken insulation.
  • Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.

Electrician/ Laborer

Allen Electrical Services
01.2016 - 05.2020
  • A &B Electrical
  • Residential and commercial experience
  • Perform rough in, trim outs, wiring, and service upgrades., Troy Electrical
  • Residential and commercial experience
  • Perform rough in, trim outs, wiring, and service upgrades., Residential and commercial experience
  • Perform rough in, trim outs, wiring, and service upgrades.
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Installed and wired electrical transformers, service panels, and circuit breakers.
  • Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
  • Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
  • Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
  • Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
  • Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
  • Installed ground leads and connected power cables to equipment.
  • Troubleshot and repaired malfunctioning systems and components.
  • Connected wires to circuit breakers, transformers or other components.
  • Spliced, joined and connected wire to fixtures and other electrical components.
  • Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
  • Followed state and local building regulations based on National Electrical Code.
  • Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
  • Prevented breakdown of systems by routinely inspecting and replacing old wiring and cleaning circuits.

Senior Electrical Technician

Arcosa Marine
06.2023 - Current
  • Installed electrical conduit and wiring for power, controls, and lighting.
  • Tested wiring and other system parts for electrical flow and function.
  • Installed electrical wiring through conduits and holes in both flooring and walls.
  • Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
  • Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
  • Tested, troubleshot, and calibrated equipment in shop and field.
  • Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
  • Inspected equipment for defects and safety hazards and completed necessary repairs.
  • Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
  • Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
  • Connected electrical systems to external power sources and programmed automated control systems to protect equipment from high voltage.
  • Disconnected and removed motors and pumps.
  • Operated and maintained electronic transmitting and receiving equipment.
  • Modified, maintained, or repaired electronics equipment or systems to achieve proper functioning.
  • Used information in technical diagrams, schematics, and manuals to understand operations and make successful repairs.
  • Conferred with engineers and designers to investigate and solve failure issues.
  • Created, aligned, and optimized electrical instrumentation and testing equipment.
  • Completed in-depth performance tests of parts and systems undergoing design optimization in simulated environments.
  • Worked to create safe, low-cost and dependable designs.
  • Revamped systems and upgraded wiring, PLCs and drives to handle changing needs.
  • Interpreted scale drawings of new commissions to determine layout of materials and equipment.
  • Analyzed interruption reports and outage databases to identify outage trends and determine needed coordination changes.
  • Used surveying equipment to grade and measure land profiles before installation of electrical systems.

Education

Industrial Maintenance Technology /Electricity Program Electrician Helper Certificate Electrical-Mechanical Assembler Certificate -

Tennessee College of Applied Technology
2019

Electrician Diploma -

OSHA 10 Certificate -

Skills

  • Lock out/ Tag out
  • Motor Controls 3 Phase
  • Proficient with Fluke 87V DMM
  • Proficient with Fluke clamp meter
  • Mechanical Maintenance
  • Instrumentation
  • HVAC
  • Basic PLC troubleshooting
  • Fluid Power
  • Single Phase Wiring
  • AC/DC Electrical
  • Welding
  • Residential, Commercial, and Industrial
  • Electrical Wiring
  • Electrical Equipment Maintenance
  • Residential Construction
  • Diagnostic Testing
  • New Construction
  • Electrical Repairs
  • Wiring Installation
  • Fixture Installation
  • Field Installation
  • Sub-Panel Installation
  • Diagram Interpretation
  • Voltmeter Use
  • Quality Assurance
  • Branch Circuit Wiring
  • Safety Management
  • Commercial Construction
  • System Testing
  • Control Circuit Troubleshooting
  • Test Equipment Operation
  • Knowledge of National Electric Code (NFPA 70)
  • Electrical Component Repair
  • Excellent Interpersonal Skills
  • Mechanical Aptitude
  • Electrical Panel Upgrades
  • AC/DC Control Circuitry
  • Wiring Termination Requirements
  • HVAC Systems
  • Electrical Provisions Installation
  • Superior Troubleshooting Skills
  • State and Local Electrical Codes
  • Electrical Experience
  • Complex Technical Information
  • Programmable Logic Controllers (PLC)
  • Expert in Schematic Design
  • Diagnostics
  • System Diagnostics
  • Works Well in Team Environment
  • Commercial and Residential Projects
  • Troubleshooting Complex Control Systems

Timeline

Senior Electrical Technician

Arcosa Marine
06.2023 - Current

Electrician

Electirician, GED ELECTRIC
07.2021 - 06.2023

Electrician Archer Electric, Residential Electrician

ElectriCare, Inc
05.2020 - 07.2021

Electrician/ Laborer

Allen Electrical Services
01.2016 - 05.2020

Industrial Maintenance Technology /Electricity Program Electrician Helper Certificate Electrical-Mechanical Assembler Certificate -

Tennessee College of Applied Technology

Electrician Diploma -

OSHA 10 Certificate -

Similar Profiles

CREATE PROFILE
Charles Berrios