Summary
Overview
Work History
Education
Skills
Affiliations
Timeline
Generic

Christopher Hammond

West Chester,OH

Summary

Skilled Automotive Tech, demonstrates abilities in troubleshooting and fixing problems within all vehicle systems. Adept at working quickly and accurately to repair, replace or refurbish components.

Overview

12
12
years of professional experience

Work History

Automotive Technician

Joe Morgan Honda
Monroe, OH
02.2023 - Current
  • Maintained a clean working environment at all times.
  • Assisted in the diagnosis of complex electrical issues using appropriate test equipment.
  • Identified recurring problems reported by customers in order to develop solutions that prevent future occurrences.
  • Adhered strictly to company policies concerning quality control standards.
  • Utilized scan tools to diagnose drivability concerns on gasoline powered cars and trucks.
  • Operated a variety of shop equipment safely and efficiently.
  • Performed routine maintenance including oil changes, tire rotations, and brake pad replacements.
  • Diagnosed mechanical problems using specialized computer software and diagnostic tools.
  • Inspected vehicle engines and other components to identify potential issues.
  • Followed established guidelines for troubleshooting and diagnosing various types of automotive systems.
  • Demonstrated knowledge of applicable safety procedures while performing repairs.
  • Replaced defective parts with new or reconditioned parts following manufacturers' instructions.
  • Repaired vehicles according to manufacturer specifications by replacing worn parts such as brakes, wheel bearings, and spark plugs.
  • Maintained certifications and completed training on systems and components.
  • Cooperated with other technicians from different disciplines to achieve optimal integration.
  • Repaired engines and transmissions, providing labor and parts cost breakdowns for work performed.
  • 100% Honda Certified on Self Studies

Automotive Technician

Performance Honda Fairfield
Fairfield, OH
06.2021 - 02.2023
  • Performed drive ability tests on vehicles after repairs were completed.
  • Assisted in the diagnosis of complex electrical issues using appropriate test equipment.
  • Replaced worn or damaged parts such as pistons, bearings, valves, gaskets, and seals.
  • Repaired or replaced defective engine components based upon diagnosis.
  • Utilized micrometers, calipers and gauges for precise measurements.
  • Assisted other technicians in the repair of complex engine problems.
  • Installed new oil pans, water pumps, valve covers and other accessories after rebuilds were completed.
  • Adjusted valves for clearance and timing according to manufacturer's specifications.
  • Measured piston clearances to ensure proper fit in cylinder bores.
  • Disassembled and reassembled engines to prepare for rebuilding process.
  • Cleaned engine components using specialized tools, chemicals, and equipment.
  • Inspected engines to identify areas of wear or damage.

Apprentice Electrician

Berg Electric
Littleton, CO
03.2015 - 12.2015
  • Maintained organization, cleanliness and safety in all work areas.
  • Demonstrated strong foundation of safety knowledge and implemented industry best practices.
  • Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
  • Inspected existing wiring to identify problems such as short circuits.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Gathered required tools and equipment for each task to increase efficiency.
  • Listened to directives of senior electrical professionals to complete efficient tasks.
  • Kept work areas clean, neat and organized for efficient operations.
  • Dug trenches and created holes to pull conduit and install supports.
  • Worked in team-based environment to accomplish projects.
  • Promoted workplace safety and reported any potential hazards quickly to the foreman.
  • Transported required supplies and employees from headquarters to job site using company vehicles.
  • Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.
  • Put in new new electrical components, fixtures and motors.

Electrical Apprentice

McDade Woodcock
Centennial, CO
06.2014 - 01.2015
  • Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
  • Listened to directives of senior electrical professionals to complete efficient tasks.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Reviewed blueprints and electrical schematics to perform tasks to specifications.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Kept work areas clean, neat and free of hazards.
  • Built controllers and panels to complete system installations.
  • Put in new new electrical components, fixtures and motors.
  • Measured and prepared supplies for electrical tasks.
  • Resolved issues with existing systems and replaced malfunctioning parts.
  • Gathered required tools and equipment for each task to increase efficiency.
  • Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Adhered to company standards and OSHA regulations for work site safety.
  • Transported required supplies and employees from headquarters to job site using company vehicles.
  • Kept work areas clean, neat and organized for efficient operations.
  • Demonstrated strong foundation of safety knowledge and implemented industry best practices.
  • Worked in team-based environment to accomplish projects.
  • Dug trenches and created holes to pull conduit and install supports.
  • Inspected existing wiring to identify problems such as short circuits.
  • Maintained organization, cleanliness and safety in all work areas.
  • Followed all relevant electrical and building codes for each job.
  • Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.

Apprentice Electrician

Intermountain Electric Service
Aurora, CO
07.2013 - 02.2014
  • Maintained organization, cleanliness and safety in all work areas.
  • Demonstrated strong foundation of safety knowledge and implemented industry best practices.
  • Completed semi-skilled and skilled work under supervision of fully qualified supervisors.
  • Inspected existing wiring to identify problems such as short circuits.
  • Operated hand and power tools and diagnostic equipment to complete various aspects of jobs.
  • Gathered required tools and equipment for each task to increase efficiency.
  • Listened to directives of senior electrical professionals to complete efficient tasks.
  • Kept work areas clean, neat and organized for efficient operations.
  • Dug trenches and created holes to pull conduit and install supports.
  • Worked in team-based environment to accomplish projects.
  • Promoted workplace safety and reported any potential hazards quickly to the foreman or safety personnel.
  • Examined and tested electrical systems to locate loose connections or other faults and make proactive repairs.
  • Promoted workplace safety and reported any potential hazards quickly to dedicated safety team members as well as the foreman.
  • Transported required supplies and employees from headquarters to job site using company vehicles.
  • Set up equipment and configured settings for optimal performance.
  • Utilized measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps accurately, efficiently and safely to complete installations and repairs.
  • Performed installation, maintenance and tests of electrical energy systems and components by safely using all equipment and tools.
  • Put in new new electrical components, fixtures and motors.
  • Verified measurements and made accurate cuts to avoid wasting materials on job sites.
  • Adhered to company standards and OSHA regulations for work site safety.
  • Followed all relevant electrical and building codes for each job.
  • Built controllers and panels to complete system installations.
  • Utilized knowledge and equipment to test wiring and other system parts for electrical flow and function.
  • Measured and prepared supplies for electrical tasks.
  • Kept work areas clean, neat and free of hazards.
  • Managed repairs and maintenance work on client systems and confirmed system adherence to coding requirements.
  • Collaborated with more knowledgeable professionals to grow understanding of principles and construction standards.
  • Resolved issues with existing systems and replaced malfunctioning parts.
  • Reviewed blueprints and electrical schematics to perform tasks to specifications.

Roadside Technician

Stevenson Lexus
Golden, CO
03.2012 - 07.2013
  • Adhered to all safety protocols and safe work practices to reduce likelihood of injury.
  • Conducted inspections and tests to verify safety and compliance with emissions limits.
  • Performed routine and reparative maintenance for company freight and trucks.
  • Performed customer work and warranty repairs in compliance with manufacturer standards.
  • Detected combustible gas and refrigerant leaks using special instruments.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Communicated with customers to explain estimates and provide expected delivery and repair timelines; addressed customer questions or concerns to enhance customer satisfaction.
  • Communicated advanced mechanical information to non-mechanical people in easy-to-understand terms.
  • Troubleshot faults and devised successful solutions in a self-directed manner.
  • Tracked mechanical and repair problems and discussed solutions with shop leadership.
  • Completed simple and advanced repairs according to specifications for systems such as brakes, exhaust and electrical.
  • Performed troubleshooting and diagnostic procedures to locate the source of malfunctions.
  • Improved operations by working with team members and customers to find workable solutions.
  • Completed repairs and maintenance to major vehicle models to meet safety specifications.
  • Kept work garage clean, organized and efficient to meet internal and regulatory expectations governing safety.
  • Examined and inspected damaged vehicles, estimating repair costs prior to performing service.
  • Pursued frequent opportunities to further enhance maintenance and repair skills.
  • Performed minor maintenance services, including gasket replacements, coolant flushes and tune-ups.
  • Removed, replaced, balanced and rotated new or used tires to maintain on-road safety
  • Answered customer questions and discussed options face-to-face, over the telephone and via email.

Education

Associate of Science - Automotive Technology

Midlands Technical College
West Columbia, SC
12.2021

Skills

  • College graduate with Certification in all 6 areas
  • 100% complete on all self study Honda Certification
  • Calibration tools
  • Wiring Installations
  • Schematics and blueprints
  • Standard power tool knowledge
  • Electrical diagnostics
  • Wiring diagrams and plans
  • Safety protocols
  • Safety awareness
  • Power and hand tool operation
  • Diagnostics and troubleshooting
  • Customer Service
  • Troubleshooting
  • Finish work
  • OSHA requirements
  • Electrical understanding
  • Engine overhauls
  • Gasket replacements
  • EPA requirements
  • Brake systems knowledge
  • Bay maintenance
  • Hazardous waste management
  • People skills
  • Problem resolution
  • Friendly, positive attitude

Affiliations

  • Member, Alumni Association

Timeline

Automotive Technician

Joe Morgan Honda
02.2023 - Current

Automotive Technician

Performance Honda Fairfield
06.2021 - 02.2023

Apprentice Electrician

Berg Electric
03.2015 - 12.2015

Electrical Apprentice

McDade Woodcock
06.2014 - 01.2015

Apprentice Electrician

Intermountain Electric Service
07.2013 - 02.2014

Roadside Technician

Stevenson Lexus
03.2012 - 07.2013

Associate of Science - Automotive Technology

Midlands Technical College
Christopher Hammond