Summary
Overview
Work History
Education
Skills
Certification
References
Timeline
Generic

Christopher Hubbartt

Altus,OK

Summary

Dependable Maintenance Technician offering 19 years of Diesel and Automotive maintenance and repair experience. In-depth knowledge of hand and power tool operations, safety protocols and general maintenance. Highly-motivated employee with desire to take on new challenges. Strong work ethic, adaptability, and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.

Overview

13
13
years of professional experience
1
1
Certification

Work History

Automotive Technician

United States Air Force Department of Defense
Altus, Oklahoma
04.2024 - Current
  • Utilized scan tools to diagnose drivability concerns on gasoline powered cars and trucks.
  • Performed drive ability tests on vehicles after repairs were completed.
  • Performed routine maintenance including oil changes, tire rotations, and brake pad replacements.
  • Maintained a clean working environment at all times.
  • Replaced defective parts with new or reconditioned parts following manufacturers' instructions.
  • Inspected vehicle engines and other components to identify potential issues.
  • Conducted scheduled maintenance services such as oil changes, tune-ups, and filter replacements.
  • Demonstrated knowledge of applicable safety procedures while performing repairs.
  • Followed established guidelines for troubleshooting and diagnosing various types of automotive systems.
  • Diagnosed mechanical problems using specialized computer software and diagnostic tools.
  • Tested automotive systems such as brakes, steering, suspension, transmission and engine performance.
  • Repaired vehicles according to manufacturer specifications by replacing worn parts such as brakes, wheel bearings, and spark plugs.
  • Operated a variety of shop equipment safely and efficiently.
  • Utilized infrared engine analyzers, compression gauges and computerized diagnostic devices to test vehicle components and systems.
  • Interpreted drawings and schematics to pinpoint sources of mechanical issues.
  • Searched within service and maintenance manuals to perform repairs and diagnosis.
  • Conducted routine servicing on fuel, electrical and cooling systems.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Removed old oil, replaced filters, and added correct amounts of fluids.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.

Mobile Maintenance Technician

Arizona Fleet Services
Tucson, AZ
06.2023 - 04.2024
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Operated hand and power tools to complete repairs.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Checked electrical components to identify defects and hazards and make necessary adjustments.
  • Repaired or replaced faulty wiring, switches, relays, and other electrical components.
  • Diagnosed and corrected mechanical problems using blueprints, repair manuals or parts catalogs.
  • Scheduled preventive maintenance programs to keep equipment in good working condition.
  • Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.
  • Responded to personnel queries and troubleshooting requests to provide repair services to improve operations.
  • Responded promptly to emergency breakdowns at any time during shift hours.
  • Trained junior technicians on best practices for machine operation and repair.
  • Replaced defective parts such as bearings, seals, gears, valves.
  • Diagnosed mechanical problems using visual inspections and test instruments.
  • Maintained accurate records of all maintenance activities performed.
  • Implemented preventive maintenance practices and upheld equipment guidelines to avoid failures.
  • Ensured proper functioning of facility's HVAC system by performing regular maintenance checks.
  • Repaired machines, equipment or structures using tools or equipment.
  • Read and interpreted equipment and work orders to properly perform required maintenance services.
  • Routinely inspected equipment for preventive and emergency maintenance needs.
  • Troubleshot complex electrical and mechanical issues with minimal downtime.
  • Approached customers and engaged in conversation through use of effective interpersonal and people skills.
  • Completed day-to-day duties accurately and efficiently.
  • Maintained open communication with team members and stakeholders, resulting in successful project outcomes.
  • Understood and followed oral and written directions.
  • Prioritized and organized tasks to efficiently accomplish service goals.

Level A Diesel Technician

Sun Transformer
Tucson, AZ
10.2019 - 04.2023
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Maintained vehicles by changing oil, checking batteries and lubricating components.
  • Removed malfunctioning parts and repaired components or installed new ones.
  • Installed turbochargers on diesel engines to increase power output without sacrificing fuel efficiency.
  • Maintained accurate records of all work completed so that future technicians could easily access information about previous repairs.
  • Tested electronic computer components in automobiles to determine proper operation.
  • Ran diagnostics on heating and cooling systems to trace faults and completed skilled repairs.
  • Disassembled and overhauled internal combustion engines, pumps and generators.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Optimized brake systems by adjusting and replacing components.
  • Diagnosed systems by troubleshooting malfunctions and tracing problems.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Checked fan belts for wear or tension issues and replaced them if necessary.
  • Conducted test drives before and after repair services.
  • Conferred with customers to obtain descriptions of vehicle problems and discuss repair requirements.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Repaired hydraulic hoses and lines according to manufacturer's specifications.
  • Assisted shop personnel and helped create cohesive and well-rounded technical environment centered around customer service, teamwork, and learning.
  • Read job orders and observed and listened to vehicles in operation to determine malfunctions and plan work procedures.
  • Utilized vehicle computer electronics systems to interpret failure modes to initiate or assign repairs.
  • Resealed oil pans after changing oil filters or performing other related services.
  • Lubricated moving parts and drove repaired vehicle to verify conformance to specifications.
  • Conducted successful road service for remote breakdowns and verified safe and operational return of company's equipment.
  • Dismantled fuel injection pumps and replaced defective seals or worn parts such as plungers and barrels.
  • Read and interpreted standards, drawings and blueprints and pinpointed inspection needs for repair work.
  • Verified dimensions and clearances of parts to achieve conformance to factory specifications.
  • Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
  • Diagnosed and performed accurate repair on brakes, engines, suspensions, drive trains and transmission clutches.
  • Examined protective guards, loose bolts and safety devices on trucks to make adjustments.
  • Maintained current working knowledge of factory technical bulletins and productively responded to customer inquiries.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Completed in-depth inspections of vehicle brakes, steering and other systems to check for safety and performance issues.
  • Conducted visual inspections of compressed natural gas fuel systems to identify cracks, discoloration and abrasions.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Conducted regular inspections of vehicles to identify any potential safety risks before they become major problems.
  • Tested vehicle components to ensure proper functioning and identified potential malfunctions or defects.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Checked and replaced clamps, brackets, hoses and other system components.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Diagnosed and repaired electrical problems in diesel engines using specialized diagnostic tools.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Performed routine maintenance and repair services on diesel engines, including engine overhauls, fuel systems, cooling systems, exhaust systems, transmissions and clutches.
  • Inspected vehicles for damage and performed repairs when necessary.
  • Understood and followed oral and written directions.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Maintained open communication with team members and stakeholders, resulting in successful project outcomes.
  • Completed day-to-day duties accurately and efficiently.

Lead Diesel Technician

Durham District School Services
Tucson, AZ
05.2017 - 01.2019
  • Provided technical advice to customers regarding vehicle maintenance issues.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Ensured compliance with applicable federal regulations related to emissions testing standards.
  • Installed accessories and non-OEM components to meet vehicle operator needs.
  • Lubricated moving parts and drove repaired vehicle to verify conformance to specifications.
  • Removed malfunctioning parts and repaired components or installed new ones.
  • Assisted shop personnel and helped create cohesive and well-rounded technical environment centered around customer service, teamwork, and learning.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
  • Diagnosed and performed accurate repair on brakes, engines, suspensions, drive trains and transmission clutches.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Diagnosed systems by troubleshooting malfunctions and tracing problems.
  • Examined protective guards, loose bolts and safety devices on trucks to make adjustments.
  • Conducted successful road service for remote breakdowns and verified safe and operational return of company's equipment.
  • Inspected brake systems, steering mechanisms, wheel bearings, and other important parts to ensure they are in proper operating condition.
  • Diagnosed malfunctions of diesel engines using computerized diagnostic equipment.
  • Completed in-depth inspections of vehicle brakes, steering and other systems to check for safety and performance issues.
  • Operated specialty equipment, standard tools and gauges to complete assessments and repairs.
  • Checked and replaced clamps, brackets, hoses and other system components.
  • Conferred with customers to obtain descriptions of vehicle problems and discuss repair requirements.
  • Maintained accurate records of all repairs, services performed, and parts used for billing purposes.
  • Optimized brake systems by adjusting and replacing components.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Utilized vehicle computer electronics systems to interpret failure modes to initiate or assign repairs.
  • Inspected completed work for accuracy prior to releasing the vehicle back to customer service.
  • Completed standard inspections to assess wear and damage to vehicles.
  • Read and interpreted standards, drawings and blueprints and pinpointed inspection needs for repair work.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Installed accessories including air conditioning units, radios, stereos, winches, hoists.
  • Maintained vehicles by changing oil, checking batteries and lubricating components.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Conducted test drives before and after repair services.
  • Read job orders and observed and listened to vehicles in operation to determine malfunctions and plan work procedures.
  • Maintained a clean working environment by adhering to safety procedures at all times.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Performed preventive maintenance on diesel engines, such as changing oil, lubricating parts, and replacing filters.
  • Ran diagnostics on heating and cooling systems to trace faults and completed skilled repairs.
  • Repaired and replaced defective components in diesel engines using specialized tools and equipment.
  • Placed orders for parts necessary to complete vehicle repairs and installations.
  • Used tools and technologies to log, research and complete repairs.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Replaced worn or damaged components on heavy-duty trucks such as transmissions, clutches, brakes, exhaust systems.
  • Troubleshot various electrical systems associated with diesel engines.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
  • Utilized technical manuals and diagrams for troubleshooting difficult problems with engine performance.
  • Delivered products to customer locations on time.
  • Maintained open communication with team members and stakeholders, resulting in successful project outcomes.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Assisted with customer requests and answered questions to improve satisfaction.
  • Completed day-to-day duties accurately and efficiently.
  • Identified needs of customers promptly and efficiently.
  • Understood and followed oral and written directions.

Diesel Technician

Durham District School Services
McKinney, TX
04.2016 - 06.2017
  • Maintained vehicles by changing oil, checking batteries and lubricating components.
  • Tested electronic computer components in automobiles to determine proper operation.
  • Used tools and technologies to log, research and complete repairs.
  • Calibrated injection timing to meet emission standards set by government regulations.
  • Removed malfunctioning parts and repaired components or installed new ones.
  • Conducted regular inspections of vehicles to identify any potential safety risks before they become major problems.
  • Read job orders and observed and listened to vehicles in operation to determine malfunctions and plan work procedures.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Diagnosed and repaired electrical problems in diesel engines using specialized diagnostic tools.
  • Inspected vehicles for damage and performed repairs when necessary.
  • Diagnosed systems by troubleshooting malfunctions and tracing problems.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Repaired hydraulic hoses and lines according to manufacturer's specifications.
  • Diagnosed and performed accurate repair on brakes, engines, suspensions, drive trains and transmission clutches.
  • Resealed oil pans after changing oil filters or performing other related services.
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Examined protective guards, loose bolts and safety devices on trucks to make adjustments.
  • Ran diagnostics on heating and cooling systems to trace faults and completed skilled repairs.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Completed standard inspections to assess wear and damage to vehicles.
  • Performed routine maintenance and repair services on diesel engines, including engine overhauls, fuel systems, cooling systems, exhaust systems, transmissions and clutches.
  • Optimized brake systems by adjusting and replacing components.
  • Read and interpreted standards, drawings and blueprints and pinpointed inspection needs for repair work.
  • Maintained current working knowledge of factory technical bulletins and productively responded to customer inquiries.
  • Replaced worn out parts such as injectors, pumps, air filters, spark plugs and belts.
  • Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
  • Lubricated moving parts and drove repaired vehicle to verify conformance to specifications.
  • Checked and replaced clamps, brackets, hoses and other system components.
  • Utilized vehicle computer electronics systems to interpret failure modes to initiate or assign repairs.
  • Conducted test drives before and after repair services.
  • Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
  • Rewired ignition systems, lights and instrument panels.
  • Provided excellent service and attention to customers when face-to-face or through phone conversations.
  • Understood and followed oral and written directions.
  • Maintained open communication with team members and stakeholders, resulting in successful project outcomes.
  • Assisted with customer requests and answered questions to improve satisfaction.
  • Maintained updated knowledge through continuing education and advanced training.
  • Completed day-to-day duties accurately and efficiently.

Diesel Mechanic

Southwestern Motor Transportation
Dallas, TX
08.2015 - 03.2016
  • Welded broken metal parts using oxyacetylene torches and electric arc welders.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Removed and disassembled defective diesel engines in automobiles, trucks, buses, and construction vehicles to complete repairs.
  • Disassembled defective units to diagnose malfunctions and repair them accordingly.
  • Placed orders for parts necessary to complete vehicle repairs and installations.
  • Utilized computer programs and visual inspections to diagnose problems with brakes, steering and transmissions.
  • Diagnosed mechanical problems and made necessary repairs.
  • Operated specialty equipment, standard tools and gauges to complete assessments and repairs.
  • Completed standard inspections to assess wear and damage to vehicles.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Tested electrical circuits for faults using diagnostic computers.
  • Inspected vehicles for safety issues and roadworthiness.
  • Followed safety guidelines while performing repair work on heavy-duty vehicles.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Performed checklist of fluid levels, air filter, tire pressure and more as part of service orders.
  • Ensured that all tools were properly cleaned after use.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Installed new parts such as radiators, injectors, hoses, belts, alternators, starters .
  • Evaluated vehicle systems to assess function and uncover defects.
  • Reviewed repairs with customers and advocated for vehicle safety.
  • Optimized brake systems by adjusting and replacing components.
  • Ran diagnostics on heating and cooling systems to trace faults and completed skilled repairs.
  • Repaired fuel injection systems, turbochargers, brakes, and exhaust systems.
  • Maintained open communication with team members and stakeholders, resulting in successful project outcomes.

Diesel Mechanic

Central Diesel Sales
Mobridge, SD
11.2014 - 08.2015
  • Completed simple and advanced repairs according to specifications for brakes, exhaust and electrical systems.
  • Welded broken metal parts using oxyacetylene torches and electric arc welders.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Disassembled defective units to diagnose malfunctions and repair them accordingly.
  • Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
  • Placed orders for parts necessary to complete vehicle repairs and installations.
  • Completed in-depth inspections of vehicle brakes, steering and other systems to check for safety and performance issues.
  • Installed accessories and non-OEM components to meet vehicle operator needs.
  • Operated specialty equipment, standard tools and gauges to complete assessments and repairs.
  • Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
  • Examined and adjusted protective guards, loose bolts and specified safety devices.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Tested electrical circuits for faults using diagnostic computers.
  • Inspected vehicles for safety issues and roadworthiness.
  • Followed safety guidelines while performing repair work on heavy-duty vehicles.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Performed checklist of fluid levels, air filter, tire pressure and more as part of service orders.
  • Conducted test drives before and after repair services.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Installed new parts such as radiators, injectors, hoses, belts, alternators, starters .
  • Completed preventive maintenance on engines, transmissions, tires and other vehicle systems.
  • Cleaned and lubricated parts before reassembly of the unit, engine, vehicle .
  • Read and interpreted standards, drawings and blueprints and pinpointed inspection needs for repair work.
  • Maintained open communication with team members and stakeholders, resulting in successful project outcomes.

Diesel Technician

First Fleet Inc
Fountain, CO
11.2011 - 09.2014
  • Cleaned or lubricated shafts, bearings or other parts of machinery.
  • Operated hand and power tools to complete repairs.
  • Diagnosed equipment malfunctions and performed repairs to restore equipment and maintain uptime.
  • Checked electrical components to identify defects and hazards and make necessary adjustments.
  • Cleaned work areas to maintain a safe environment free from debris or hazardous materials.
  • Maintained or repaired specialized equipment or machinery.
  • Repaired or replaced faulty wiring, switches, relays, and other electrical components.
  • Diagnosed electrical problems and implemented repair solutions.
  • Repaired and serviced air conditioning, heating and electrical systems.
  • Completed repair orders in a timely manner according to customer specifications.
  • Used diagnostics and troubleshooting tools to identify failures and equipment issues.
  • Replaced worn tires with new ones on tractor trailers.
  • Repaired or replaced broken parts including brakes, steering mechanisms, transmissions, engines, and other components of tractor trailers.
  • Checked fluid levels periodically to ensure proper functioning of tractor trailer systems.
  • Diagnosed mechanical problems using technical manuals and diagnostic equipment.
  • Raised trucks, buses and heavy parts or equipment with hydraulic jacks or hoists.
  • Demonstrated knowledge in operating computerized diagnostic equipment for troubleshooting purposes.
  • Performed welding tasks as required for certain types of repairs.
  • Completed in-depth inspections of vehicle brakes, steering and other systems to check for safety and performance issues.
  • Improved function of engines by replacing spark plugs, fuel filters and defective sensors.
  • Maintained records of all service activities performed on each vehicle.
  • Ensured that all tools were properly calibrated before use.
  • Performed troubleshooting and diagnostic procedures to locate source of malfunctions.
  • Tested electronic computer components in automobiles to determine proper operation.
  • Installed new body panels, rails, and corners.
  • Assisted fellow mechanics with more complex repairs when needed.
  • Performed maintenance inspections, tune-ups, oil changes and other key services.
  • Performed preventative maintenance services such as oil changes, lubrication, and filter changes on tractor trailers.
  • Removed old oil, replace filters and added correct amount of new [Type] oil.
  • Retrieved part numbers from online databases when ordering replacement parts.
  • Read and interpreted standards, drawings and blueprints and pinpointed inspection needs for repair work.
  • Maintained vehicles by changing oil, checking batteries and lubricating components.
  • Verified dimensions and clearances of parts to achieve conformance to factory specifications.
  • Conducted test drives before and after repair services.
  • Used manual and computer- assessed diagnostic devices to test equipment and determine repair needs.
  • Reviewed brakes and assessed whether pads needed replacement, discs should be turned or other service requirements.
  • Checked vehicle mileage and determined necessary belts, fluids flushing or gasket replacements.
  • Updated computer system with latest changes for each trailer.
  • Ran diagnostics on heating and cooling systems to trace faults and completed skilled repairs.
  • Prioritized and organized tasks to efficiently accomplish service goals.
  • Maintained schedule of class assignments to meet deadlines.

Education

Associate of Science - Diesel Technology

Universal Technical Institute of Arizona Inc
Pheonix, AZ
09-2005

High School Diploma -

North Pole High School
North Pole, AK
05-2002

Skills

  • Brakes and Tires
  • Oil Service
  • Vehicle System Analysis
  • Solid Independent Worker
  • Fluid Changes
  • Inspection Checklists
  • Engine Repair
  • Safety Management
  • Inspection Procedures
  • Oil Changes
  • Fluid Adjustments
  • Engine Repairs
  • Brake Systems
  • Fleet Management
  • Parts Ordering
  • Documentation

Certification

  • UTI Graduate
  • Air Conditioning Cert
  • DOT inspection Cert
  • Brake Cert

References

  • Francisco Campos 6/2023-5/2024, Phone # 520-450-8401, Arizona Fleet Services
  • Merle Drew 3/2018-4/2023, Phone # 520-661-0983, 3D Property Management
  • Jose Velasquez 10/2019-04/2023, Phone # 520-780-0761, Sun Tran Transportation
  • William Dixon, 11/1990-present, retired WS-14, Phone # 502-249-4692
  • Kenneth Forbes, 11/1990-present, retired GS-12, Phone # 907-687-0307
  • Mike Runyan, 1990- present, WS-9, Altus AFB, Phone # 907-347-6832

 

Timeline

Automotive Technician

United States Air Force Department of Defense
04.2024 - Current

Mobile Maintenance Technician

Arizona Fleet Services
06.2023 - 04.2024

Level A Diesel Technician

Sun Transformer
10.2019 - 04.2023

Lead Diesel Technician

Durham District School Services
05.2017 - 01.2019

Diesel Technician

Durham District School Services
04.2016 - 06.2017

Diesel Mechanic

Southwestern Motor Transportation
08.2015 - 03.2016

Diesel Mechanic

Central Diesel Sales
11.2014 - 08.2015

Diesel Technician

First Fleet Inc
11.2011 - 09.2014

Associate of Science - Diesel Technology

Universal Technical Institute of Arizona Inc

High School Diploma -

North Pole High School
  • UTI Graduate
  • Air Conditioning Cert
  • DOT inspection Cert
  • Brake Cert

Similar Profiles

  • BENJAMIN KRUAH

    BENJAMIN KRUAHBENJAMIN KRUAH

    Aircraft Maintenance Supervisor at United States Air Force ReserveAircraft Maintenance Supervisor at United States Air Force Reserve

    View Profile
  • Titus Carlson

    Titus CarlsonTitus Carlson

    Director of Marketing/Commercial Sponsorship Coordinator at Department of Defense - United States Air ForceDirector of Marketing/Commercial Sponsorship Coordinator at Department of Defense - United States Air Force

    View Profile
  • Christopher Hug III

    Christopher Hug IIIChristopher Hug III

    Supervisory Youth Programs Specialist (GS-11 / 1701) at Department of Defense-United States Air ForceSupervisory Youth Programs Specialist (GS-11 / 1701) at Department of Defense-United States Air Force

    View Profile
Christopher Hubbartt