Christopher Zamora
Corpus Christi,TX
Summary
Experienced maintenance professional offering 8 years as Technician/Mechanic. Strong mechanical aptitude and problem solving skills. Focused on preventive maintenance to control costs.
Overview
14
14
years of professional experience
Work History
Aircraft Electrician
Department Of Defense Army
Corpus Christi Army Depot
07.2022 - Current
- Assisted in conducting electrical inspections on UH-60 Black Hawk Victor model aircraft systems and components.
- Learned to troubleshoot and repair electrical wiring and circuitry under supervision.
- Supported installation of electrical systems, ensuring compliance with safety standards.
- Increased team productivity through cross-functional collaboration with fellow electricians, mechanics, and technicians in addressing aircraft issues.
- Promoted workplace safety by strictly adhering to established guidelines when working with high-voltage equipment and hazardous materials.
- Played a crucial role in preparing aircraft for deployment by diligently inspecting and maintaining all essential electrical components.
- Installed new wiring harnesses all throughout UH-60 Black hawk aircraft.
- I have the ability to solve complex problems by interpreting technical data such as blueprints or manufactures manuals.
- I have worked on different types of Connectors, Receptacles, Wire characteristics, Identification, Size, Markings, Pinning Procedures, and Types of Terminations.
- Built multiple sections of the aircraft to include nose, cockpit, cabin, fuel cells, transition, and tail cone.
- Contributed to positive work environment as an effective communicator who actively listened, provided constructive feedback, and demonstrated a strong commitment to teamwork.
- Completed quality assurance checks for service work and completed documentation outlining updates.
- Worked along side quality control once areas were completed they would inspect zones for any defects or wiring not in compliance with tech data.
- I have the ability to use and maintain hand tools (Electrical Work) to include Phillips Screwdrivers, Straight-Blade Screwdriver, Allen Wrench Set (Hex Set), Tongue-and-Groove Pliers, Wire Strippers, Non-Contact Voltage Tester, Needle-Nose Pliers, Linesman Pliers, Diagonal Cutting Pliers, Fish Tape, Digital Ohmmeter, Insertion and Extraction tools, Crimping Tool, Wire Crimpers, Pin Crimpers, Lug Crimpers, Environmental Crimpers, Hydraulic Crimpers, Pneumatic Crimper, Torque Wrench, Banding Tool, and Channel Lock Pliers.
- I know/have worked on different types of connectors (Round, Square, and Wafer). I can understand basic definitions, labeling of wires, and color-coding.
Audiovisual Production Specialist
Department of Defense
Corpus Christi Army Depot
11.2024 - 03.2025
- Assisted in creating productions ranging from communication features, public service announcements and informal videos on topics aligned with Corpus Christi Army Depot Mission and Vision.
- Assist in carrying out the public affiars, protocol, visual information program.
- Learned the VIOS program utilized for work orders for audio needs, photo and or video needs.
- Took photos of event coverage of special events on and off the Corpus Christi Army Depot such as the quad A event and other special events involving the Commander and Seargant Major.
- Took photos of various events throughout Corpus Christi Army Depot such as award ceremonies and retirements.
- Used adobe photoshop and adobe lightroom to sort and edit photos.
- Used adobe illustrator to create fliers and graphics.
- Operated audiovisual equipment for live events and presentations, ensuring high-quality audio and visual output.
- Collaborated with team members to set up and dismantle production setups efficiently.
- Assisted in maintaining and troubleshooting audiovisual systems to minimize downtime during events.
- Executed pre-production planning, including script review and scheduling of resources for projects.
- Managed inventory of audiovisual equipment, tracking usage, maintenance, and procurement needs.
- Implemented process improvements that enhanced workflow efficiency during event productions.
- Coordinated with clients to understand project requirements and deliver tailored audiovisual solutions.
- Coordinated equipment setup and breakdown for efficient use during shoots or events.
- Achieved client satisfaction through clear communication, understanding their needs, and delivering tailored solutions.
- Ensured best practices in safety protocols were followed consistently across all projects, reducing risks on set or location filming sites.
- Stayed current with industry trends, incorporating new technologies to enhance overall production value.
- Provided technical expertise during live events to ensure smooth execution without disruptions or glitches in AV systems.
- Conducted thorough research to support the development of compelling stories and narratives in productions.
- Managed multi-camera setups efficiently, capturing dynamic footage from varied angles for an immersive viewer experience.
- Collaborated with cross-functional teams to ensure seamless coordination and communication during projects.
- Streamlined production processes for improved efficiency and reduced turnaround time.
- Enhanced audiovisual quality by diligently editing and mixing sound for various projects.
- Implemented quality control measures throughout the production process to maintain a high standard of deliverables.
- Established effective workflows through meticulous pre-production planning, including scouting locations, coordinating schedules, and allocating resources strategically.
- Developed creative concepts, resulting in innovative and engaging audiovisual content.
- Managed budgets and timelines effectively, ensuring all productions were completed on time and within budget constraints.
- Nurtured strong relationships with clients, vendors, and other stakeholders to facilitate successful collaboration on future projects.
- Facilitated smooth workflow by maintaining well-organized project files and detailed documentation.
- Delivered high-quality final products by meticulously reviewing and fine-tuning all aspects of audiovisual materials.
- Spearheaded troubleshooting efforts during challenging situations, resolving issues promptly while minimizing delays in production schedules.
- Tested and calibrated audio and visual equipment to verify proper operation.
- Programmed and operated audio-visual equipment to support seamless live events.
- Diagnosed and resolved problems with AV equipment and media management systems.
- Controlled video input for live conferences or performances and pre-recorded productions.
- Managed compression, digitization and storage of audio and video data.
- Created graphics and layouts for live and pre-recorded talks.
Aircraft Fuel Systems Technician
Amentum
Corpus Christi, TX
02.2022 - 07.2022
- Specialized in T700 Anti Ice/Starting Bleed Valve which manages airflow for compressor protection during start-up and anti-icing. It automatically opens during engine starts to prevent surges and provides hot air for anti-ice, featuring dual outlets to control airflow to the compressor and engine inlet.
- Diagnosed and repaired aircraft fuel system issues to ensure optimal performance and safety compliance.
- Conducted routine inspections of fuel systems, identifying potential risks and implementing corrective measures.
- Collaborated with engineering teams to develop maintenance protocols for fuel system components, enhancing reliability.
- Collaborated with team members to streamline repair workflows and enhance efficiency.
- Mentored junior mechanics, providing guidance on best practices and safety protocols.
- Supervise direct bill employees under the supervision of a Production Supervisor in support requirements from a Contract Order for UH-60 Fuel Systems.
- Manage personnel and staff, including paperwork or digital assignment.
- Record keeping of QTL’s (Quality Task Listing) and training involved with employees.
- Support the Production Supervisor in working with the customer in achieving their desired results.
- Supervise the disassembly, evaluate and examine, and assembly of components on main rotor and tail rotor blades. Implemented process improvements that reduced turnaround time for repairs.
- Maintained a safe working environment at all times by adhering to company guidelines and OSHA regulations, reducing workplace accidents.
- Collaborated with team members to complete large-scale projects, ensuring timely completion and high-quality workmanship.
- Consistently met or exceeded company performance metrics through diligent work ethic and attention to detail in all repair tasks. Trained new lower level mechanics to work out of the Depot Maintenance Work Requirements technical data.
Aircraft Engine Mechanic
Amentum
Corpus Chris, TX
02.2022 - 06.2022
- Worked on T700 Engine Assembly Line. Assembling the T700 Engine used in the UH60 & AH64.
- Documented maintenance actions with CAMS & TAMS MCDS.
- Used dry ice and ovens to install bearings and seals.
- Completed preventive and reparative maintenance on aircraft electronics and computer systems.
- Currently testing the A&I Valve.
Aircraft Trades Helper (Hydraulic Mechanic)
Amentum
Corpus Christi, TX
08.2019 - 07.2022
- Salary: 22.73 USD Bi-weekly Hours per week: 40, I currently assemble, repair, and rework a variety of hydraulic, mechanical, pneumatic and fluid operated components of aircraft systems UH-60 and AH-64 which are processed as individual units of production.
- I work out of LMP (Logistics Modernization Program) CAMS (Complex Assembly Manufacturing systems) starting and stopping of operations to complete processes also input my time in ESS daily.
- I work closely with my supervisor and work leader to make sure we meet work schedules.
- I play a big part in VPP Voluntary Protection Program by notifying my supervision of an hazards that occur in my shop or near misses.
- I replace pumps, valves, hoses and connections which are obviously defective.
- I also make adjustments during assembly to components which require determination of alignment, wear pattern or adjustment where critical tolerance are not a factor.
- I E&E parts and mating surfaces for wear corrosion, scratches or other obvious defects and for conformance to dimensional tolerances.
- I scrap parts which exceed allowable wear thresholds.
- I follow all appropriate policies, regulations, safety procedures, and FOD (Foreign Objects Debris) practices daily CCAD 385-10.
- I rework parts, remove imperfections from seating and sealing surfaces, pretests parts and assemblies of components for leakage, and observes operability of moving parts.
- I work with tools such as torque wrenches, impacts, micrometers, dial indicator, heat gun, vise grips, scribe, and etc.
- I assembles parts into components by shimming, honing, lapping and re cleaning or touch-up paint work as needed.
- I am knowledgeable of red tagging BER (Beyond Economical Repair) parts once disassembled.
- I have knowledge of aircraft pneudraulic systems and pneudraulic equipment used in maintaining and checking aircraft pneudraulic equipment.
- I am familiar with aircraft structures and the relationship of aircraft systems.
- I have knowledge of troubleshooting procedures designed to isolate and diagnose the cause of malfunctions and make necessary adjustment or repair.
- I work out of DMWRS and know how to navigate through technical data and interpret blue prints.
- I have ability to learn and retain information on new pneudraulic systems, procedures and operations.
- I posses ability to use hand tools, jigs, fixtures, and special tools and instruments.
- Supervisor: Corrie Jackson (3619615613) Okay to contact this Supervisor: Yes.
Facilities Maintenance Technician
Amentum
Corpus Christi, TX
11.2021 - 12.2021
- Performed scheduled maintenance on electrical, plumbing and HVAC systems.
- Carried out building updates such as painting surfaces, replacing fixtures and reorganizing rooms.
- Completed troubleshooting and diagnostic procedures to diagnose problems with equipment and systems.
- Operated forklifts and other heavy equipment to load or unload trailers.
- Maintained facility to foster clean environment free from litter, dust and pollutants.
- Drove compliance with regulations, building codes and health and safety standards.
- Repaired facility electrical equipment to keep production moving at optimal efficiency.
- Organized and maintained inventory of spare parts and equipment consumables.
- Sourced and obtained multiple quotes for parts and supplies per purchasing requirements.
- Evaluated systems and facility infrastructure to ascertain and improve operational efficiencies.
- Inspected buildings, grounds and equipment for unsafe or malfunctioning conditions.
- Coordinated with engineering department to address quality issues, vendor qualifications and assessments.
- Worked quickly on emergency requests in order to minimize disruptions to operations.
- Assisted workers by organizing supplies, passing tools and managing equipment.
- Diagnosed problems with electrical systems and rewired components to restore safe flow of electricity.
- Disassembled broken, defective and worn out equipment to aid with repairs.
- Worked with building managers to assess ongoing needs and plan preventive maintenance and cleaning schedules.
- Wrote and revised maintenance procedures.
- Performed installation, alignment and balancing of equipment.
- Updated logs of actions taken using computer tracking system.
- Inspected and tested machinery and equipment to diagnose malfunctions.
- Cleaned and lubricated components to maintain optimal performance.
- Identified equipment and production non-compliance issues and notified foreman to facilitate resolution.
- Prepared RIGID pipe cutter and RIGID pipe threader machinery for use and verified presence of sufficient parts to complete operations.
- Mounted brackets and hangers on walls and ceilings to hold pipes in place.
Automotive Painter Technician
American Auto Body
Corpus Christi, TX
05.2016 - 06.2019
- Salary: 12.50 USD Bi-weekly Hours per week: 40, I Developed extensive experience and skills while painting vehicles.
- Painted surfaces of transportation equipment, such as automobiles, trucks and fleet vans, applying knowledge of surface preparation and painting techniques.
- Adjusted the “standard” way of scuffing and prepping vehicles, increasing productivity and doubling adhesion.
- Gathered tools and materials needed for the career, including paint guns, paint guns used for clear coats, Dynabrade Das sander, full size and mini buffers, and several other tools used in the refinishing process.
- Managed other processes, such as laying out and painting insignias, symbols, designs, and other markings on painted surfaces; regulating controls on equipment to cure and dry paint or other coatings; setting up exhaust units, ladders prior to painting; and removing accessories and electrical equipment from motor vehicles.
- Exhibited meticulousness in my maintenance of my tools, work area, and booth- prepped vehicles.
- Successfully maintained vehicle parts inventory.
- Successfully handled several start-to-finish conventional and custom paint jobs.
- Supervisor: Efrain Vasquez (3618551883) Okay to contact this Supervisor: Yes.
Plumbers Helper
Pro Express Plumbing
Corpus Christi, TX
09.2019 - 08.2020
- Salary: 10.00 USD Bi-weekly Hours per week: 40, I reviewed blueprints, building codes and specifications to accurately plan work.
- Performed work relating to the installation alteration maintenance and repair of piping of gas potable water plumbing heating and drainage systems.
- Set maintained and repaired plumbing equipment and accessories.
- Moved heavy valves piping and fixtures.
- Cut or prepared openings for the installation maintenance and repair of plumbing pipes and fixtures.
- Created and submitted daily reports on the progress of all plumbing projects.
- Follow codes regulations and safety techniques.
- Operated excavator to dig and lay pipe and cover area after burying pipe.
- Soldered copper piping.
- Supervisor: George Gatica (3614436626) Okay to contact this Supervisor: Yes.
Printer Service Supervisor
Xerox, Dahill
corpus christi, United States, United States
04.2012 - 02.2019
- Salary: 19.00 USD Bi-weekly Hours per week: 40, Oversee the work and performance of 8 employees.
- Maintain accurate and detailed logs within the established ticketing system for customer calls and system alerts, as well as for communication and escalation steps taken to ensure prompt resolution of the help desk facility, network and customer related issues.
- Document and administered excel spreadsheets for work orders and printer parts.
- Rebuilt printers, soldering, utilizing multimeter replacing small parts and or rebuilding components.
- Knowledge of electronic and electrical principles to maintenance and repair tasks, using common test instrument readings and alignment.
- Read and apply reference materials such as wiring diagrams, blueprints, and maintenance and repair procedures.
- Proficient in trouble-shooting printers, and network/software instillation.
- Communicated with customers, employees and other individuals to answer questions disseminate or explain information as well as set up ETA with customers.
- Responsible for team performance of maintain accurate and complete diagnosis of both product and equipment including the logging defined by procedure or practice of the company.
- Provided leadership, guidance and constructive feedback to all employees regularly.
- Supervisor: Moses Mughal (3618348788) Okay to contact this Supervisor: Yes.
Education
High School Diploma -
Ray High School
Corpus Christi, TXSkills
- Mechanical expertise
- Documentation
- Equipment installation
- Hand and power tools
- Safety and compliance
- Problem solving ability
- Plumbing
- Safety awareness
- Responsible
- Training & Development
- Computer proficiency
- Excellent work ethic
- Interpersonal Communication
- Collaboration
- Good telephone etiquette
Building race cars. Photography. Weightlifting Strength Training.
As a hobby I enjoy performing motor swaps on various types of automobiles. Taking part in racing auto cross events porsche club race events and occasional 1/4 mile drag strip racing.
I have done photography for over 14 years as a hobby.
I take health very serious and attribute a healthy diet to my daily life and strength train/weight lift.
Reference
Alex Ximenez
Work Location NAS CCAD
Hydraulics Branch #2 Supervisor • USARMY USAMC
work #
(361) 961-3161
cell #
(361)-548-4556
Ruben Teran
Work Location NAS CCAD
T700 Engine Assembly Line Branch Chief • USARMY USAMC
work#
(361) 961-2398
Timeline
Audiovisual Production Specialist
Department of Defense
11.2024 - 03.2025
Aircraft Electrician
Department Of Defense Army
07.2022 - Current
Aircraft Fuel Systems Technician
Amentum
02.2022 - 07.2022
Aircraft Engine Mechanic
Amentum
02.2022 - 06.2022
Facilities Maintenance Technician
Amentum
11.2021 - 12.2021
Plumbers Helper
Pro Express Plumbing
09.2019 - 08.2020
Aircraft Trades Helper (Hydraulic Mechanic)
Amentum
08.2019 - 07.2022
Automotive Painter Technician
American Auto Body
05.2016 - 06.2019
Printer Service Supervisor
Xerox, Dahill
04.2012 - 02.2019
High School Diploma -
Ray High School