Christopher J. Lianzo
Aviation
Winston Salem,NC
Summary
Responsible Technician with excellent troubleshooting, customer service and analytics skills coupled with more than 32 years of experience. Highly effective in complying with safety requirements evidenced by zero work loss days. Broad skills in maintenance and troubleshooting.
Overview
33
33
years of professional experience
Work History
AOG Controller
Jet East Corp Aviation, LLC
Winston-Salem, NC
06.2022 - Current
- Ensure all safety directives are complied with as they relate to repair station facilities, employee / customer / vendor safety, and the safety of aircraft housed in repair station facilities.
- Ensure assigned Technicians have the appropriate equipment, tools and maintenance data for performing assigned tasks.
- Ensure that the proper data is being used at any time during performance of work.
- Train, assist and supervise Technicians in proper work procedures and practices.
- Ensure personnel have appropriate experience or knowledge or are properly. trained prior to assigning maintenance, preventive maintenance or alteration tasks.
- Verify that the work is performed in accordance with the applicable technical data.
- Ensure maintenance records are appropriately completed.
- To keep constant and adequate communication with Technicians and Inspectors.
- Coordination and schedule of work away from the fixed location.
- Ensure the work away locations are safe and adequate for the scope of work.
- To ensure the work scope performed away from the fixed location is limited to those maintenance, preventive maintenance and alteration actions that can be accomplished with housing, facilities, personnel, equipment, material, tooling and data that can be transported to or are available where the work is performed.
- To ensure only Technicians and Inspectors specifically familiar with and capable of performing the work scope anticipated are assigned to perform the maintenance requested for work performed away from the fixed location.
- To ensure the equipment, tooling and data necessary to accomplish the requested work scope (including the pertinent paragraphs of this manual) are made available to the Work Away Technicians and Inspectors during a work away.
- To keep an update of Technicians and Inspectors and Vehicle’s locations as needed or when changes are made and have the update available for distribution for the customer, management, or FAA.
Crew Lead/ Shop Foreman
Appalachian Aero Group
Hickory, NC
11.2021 - 06.2022
- Managed resources, materials, systems maintenance, regulatory compliance, schematics implementation and proper documentation of orders, operations, schedules and evaluations.
- Used hand and power tools, equipment and instruments accurately.
- Provided training, coaching and support of staff members, resulting in elevated individual performance to boosted service standards.
- Directed daily operations of team of 6 technicians and shop professionals.
- Qualified to perform engine runs, run APUs’, and taxi the following aircraft: Bombardier: Challenger 300, 350, 601, 604, 605, Global 5000, 6000, Learjet 35, 45, 60 Embraer: Phenom 100, 300 Gulfstream: G150, G200, G300, GIV, G450, GV, G550 Textron: Citation 550, 560XLS, 650, 680, 680A, 750, Hawker 400XP, 700, 800XP.
Airframe & Powerplant Technician
HSGI, Stevens Aerospace and Defense
Charlotte, NC
01.2021 - 10.2021
- Perform AOG maintenance on the following aircraft; Bombardier: Challenger 300, 350, 601, 604, 605, Global 5000, 6000, Learjet 35, 45, 60 Embraer: Phenom 100, 300 Gulfstream: G150, 200, G300, GIV, G450, GV, G550 Textron: Citation 550, 560XLS, 650, 680, 680A, 750, Hawker 400XP, 700, 800XP.
- Qualified to perform engine runs, run APUs’, and taxi the following aircraft: Bombardier: Challenger 300, 350, 601, 604, 605, Global 5000, 6000, Learjet 35, 45, 60 Embraer: Phenom 100, 300 Gulfstream: G150, G200, G300, GIV, G450, GV, G550 Textron: Citation 550, 560XLS, 650, 680, 680A, 750, Hawker 400XP, 700, 800XP.
- Updated logs and filled out maintenance reports with high accuracy and efficiency.
- Coordinated parts and material requisitions to expedite aircraft maintenance and repairs.
- Serviced and repaired fuel, electrical, hydraulic and other aircraft systems.
Quality Assurance Inspector
Signature TECHNICAir
Greensboro, NC
11.2017 - 12.2020
- Started as the first AOG technician for the company and established our presents in the AOG industry.
- Ensure the utmost quality product is presented to the Customer.
- Oversaw maintenance, calibration, and control of inspection, measuring, and all test equipment.
- Work on a wide range of customer aircraft including: Bombardier: Challenger 300, 350, 601, 604, 605 CRJ 200, 700, 900 Global 5000, 6000, Learjet 35, 45, 60, Dassault Falcon 10, 20, 50, 900, 2000 Embraer: Phenom 300 Textron: Cessna Citation CJ1, CJ2, CJ3, CJ4, 560XL,560XLS, 680, 680A, 750 Hawker 400XP, 700, 800XP, 1000.
- Qualified to perform engine runs, run APUs’, and taxi the following aircraft: Bombardier: Challenger 300, 350, 601, 604, 605, Global 5000, 6000, Learjet 35, 45, 60 Dassault: Falcon 10, 20, 50, 90, 2000 Embraer: Phenom 300 Gulfstream: G150, G200, G300, GIV, G450, GV, G550, Textron: Citation 550, 560XLS, 650, 680, 680A, 750, Hawker 400XP, 700, 800XP.
Airframe & Powerplant Technician
Gama Aviation
West Palm Beach, FL
02.2017 - 10.2017
- Completed AOG, scheduled and unscheduled maintenance on corporate aircraft.
- Updated logs and filled out maintenance reports with high accuracy and efficiency.
- Read and interpreted manufacturer and airline maintenance manuals, service bulletins and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
- Qualified to perform engine runs, run APUs’, and taxi the following aircraft: Bombardier: Challenger 300, 350, 601, 604, 605, Global 5000, 6000, Learjet 35, 45, 60, Dassault: Falcon 10, 20, 50, 90, 2000, Embraer: Phenom 300, Gulfstream: G150, G200, G300, G400, GIV, G450, GV, G550, Textron: Citation 550, 560XL/S/+, 650, 608/A, 750, Hawker 400XP, 700, 800XP.
Airframe & Powerplant Technician
Big Sky Aviation
West Palm Beach, FL
02.2016 - 02.2017
- Completed AOG, scheduled and unscheduled maintenance on corporate aircraft.
- Updated logs and filled out maintenance reports with high accuracy and efficiency.
- Read and interpreted manufacturer and airline maintenance manuals, service bulletins and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
- Qualified to perform engine runs, run APUs’, and taxi the following aircraft: Bombardier: Challenger 300, 350, 601, 604, 605, Global 5000, 6000, Learjet 35, 45, 60, Dassault: Falcon 10, 20, 50, 90, 2000, Embraer: Phenom 300, Gulfstream: G150, G200, G300, G400, GIV, G450, GV, G550, Textron: Citation 550, 560XL/S/+, 650, 608/A, 750, Hawker 400XP, 700, 800XP.
Field Service Representative
Dallas Airmotive
West Palm Beach, FL
08.2012 - 02.2016
- Troubleshoot, repair, overhaul, remove and install engines on various airframes.
- Perform logbook research.
- Provide 8130’s and logbook entries.
- Honeywell HTF7000 & TFE731, Pratt & Whitney Canada 300 & 500, Rolls Royce Tay & BR710.
Mechanical Team Lead
Gulfstream Aerospace
West Palm Beach, FL
02.2008 - 08.2012
- Manage AOG, Drop-In and NetJets aircraft with a crew of 10.
- Troubleshoot electrical, avionics, structural, hydraulic, power plant, environmental control systems, oxygen, and landing gear components and subcomponents
- Work aircraft discrepancies and squawks in accordance with specific aircraft maintenance manuals, technical representatives, and correct engineering data.
- Required to document all maintenance performed in Corridor.
- Knowledgeable and experienced using computers and aircraft software.
- Open and close work orders.
- Perform preliminary and outbound inspections along with returning the aircraft to service
- Qualified to perform engine runs, run APUs’, and taxi the following aircraft: Bombardier: Challenger 601, 604, Dassault: Falcon 2000 Gulfstream: G150, G200, G300, GIV, G450, GV, G550 Textron: Citation 560XL, 560XLS, 650, 680, 750, Hawker 400XP, 700, 800XP.
Flight Test Quality Control Inspector
Sikorsky Aircraft
West Palm Beach, FL
01.2007 - 02.2008
- Collaborate with Supervisors, aircraft managers and lead technicians to resolve aircraft discrepancies and to resolve complex issues.
- Ensure every aircraft is built, modified or completed utilizing correct engineering data, which results in an on time, under budget, defect free product.
- Supervised a 15-person QA team.
- Tested Sikorsky S-92 and UH-60M for function and accuracy and verified final product configuration met engineering specifications.
Mechanical Team Lead
Gulfstream Aerospace
West Palm Beach, FL
12.2004 - 12.2007
- Directed and supervised team of 5 engaged in scheduled and unscheduled maintenance on Gulfstream aircraft G150, G200, GIV, G450, GIV and G550.
- Troubleshoot electrical, avionics, structural, hydraulic, power plant, environmental control systems, oxygen, and landing gear components and subcomponents.
- Work aircraft discrepancies and squawks in accordance with specific aircraft maintenance manuals, technical representatives, and correct engineering data.
- Required to document all maintenance performed in Corridor.
- Open and close work orders.
- Perform preliminary and outbound inspections along with returning the aircraft to service.
- Qualified to perform engine runs, run APUs’, and taxi Gulfstream: G150, G200, G300, GIV, 450, GV, G550.
Airframe & Powerplant Technician
L3 Communications
Baghdad, Iraq
10.2003 - 11.2004
- Completed scheduled and unscheduled maintenance on AH64, OH58 and UH60 Helicopters 12hrs a day, 7 days a week.
- Inspected aircraft daily to assess airworthiness.
- Updated logs and filled out maintenance reports with high accuracy and efficiency.
Airframe & Powerplant Technician
Reliance Aviation
Fort Lauderdale, FL
12.2001 - 10.2003
- Perform pre/post flight inspections, A/A+/A++/B/C and D phase inspection checks, routine hourly maintenance checks and special incident inspections.
- Interpret technical manuals and wiring prints to troubleshoot and repair aircraft.
- Perform all aircraft maintenance with no supervision under the Company Certified Repair Station or A&P.
- Communicate with technical support and aircraft engineering to validate all data in information is being performed as per the maintenance manual.
Airframe & Powerplant Technician
Jet Harbor
Fort Lauderdale, FL
07.1998 - 12.2001
- Completed scheduled and unscheduled maintenance on Saberliner: 40, 60, 80 Challenger: 601, 604, Learjet: 25, 35, 45 Cessna: Citation 550, 560, 650.
- Maintained and repaired aircraft components including, flight controls, engines, hydraulics, pneumatic lines and hoses, fuel systems, and mechanical components with minimal supervision.
- Inspected aircraft daily to assess airworthiness.
Airframe & Powerplant Technician
Banyan Aircraft Services
Fort Lauderdale, FL
01.1996 - 07.1998
- Completed scheduled and unscheduled maintenance on Bombardier: Challenger 601, 604 Learjet 25, 35, 45 Cessna: Citation 550, 560XL, 650.
- Maintained and repaired aircraft components including, flight controls, engines, hydraulics, pneumatic lines and hoses, fuel systems, and mechanical components with minimal supervision.
- Inspected aircraft daily to assess airworthiness.
Airframe & Powerplant Technician
Turbo Power
Miami Lakes, FL
07.1994 - 01.1996
- Overhaul the Allison T56/501 engine.
- Performed routine equipment inspections and maintained and completed corrective actions by referring to workbooks and technical publications to determine specifications
- Worked within guidelines established by internal, manufacturer and regulatory authorities
Aerospace Propulsion Specialist
U.S. Air Force
Edwards Air Force Base, CA
04.1991 - 06.1994
- Experienced troubleshooting Allison T56/501 Electrical, Mechanical and Pneumatic systems.
- Maintained and repaired engine, propellers and APU components including, hydraulics, pneumatic lines and hoses, fuel systems, and mechanical components with minimal supervision.
- Performed component removal and replacement using appropriate tools and shop aids to comply with a strict military standard.
- Performed apprentice level duties involving scheduled cleaning, daily/turnaround inspecting, oil servicing, refueling and handling.
- Required to catch, launch, and tow aircraft safely around congested parking aprons.
- Selfless dedication in maintaining maximum aircraft availability to achieving a 99% sortie completion rate in support of Operation Desert Storm.
Education
Initial Training - Aviation Maintenance
Global Jet Services
Greensboro, NC02.2018
Master Technican - Aviation Maintenance
Flight Safety
West Palm Beach, FL04.2010
Airframe And Powerplant - Aviation Maintenance
Broward College Aviation Institute
Hollywood, FL04.1997
5 Level - Aerospace Propulsion
United States Air Force
Edwards Air Force Base, CA07.1991
Skills
- Safety awareness
- Equipment Usage
- Team Leadership
- Scheduling
- Reading technical manuals
- Installing equipment
- Servicing systems
- Diagnosing problems
- Preventive Maintenance
- Quality control
- Engine repair
- Strong communication
- Critical Thinking
- Basic print reading skills and layout skills
Timeline
AOG Controller
Jet East Corp Aviation, LLC
06.2022 - Current
Crew Lead/ Shop Foreman
Appalachian Aero Group
11.2021 - 06.2022
Airframe & Powerplant Technician
HSGI, Stevens Aerospace and Defense
01.2021 - 10.2021
Quality Assurance Inspector
Signature TECHNICAir
11.2017 - 12.2020
Airframe & Powerplant Technician
Gama Aviation
02.2017 - 10.2017
Airframe & Powerplant Technician
Big Sky Aviation
02.2016 - 02.2017
Field Service Representative
Dallas Airmotive
08.2012 - 02.2016
Mechanical Team Lead
Gulfstream Aerospace
02.2008 - 08.2012
Flight Test Quality Control Inspector
Sikorsky Aircraft
01.2007 - 02.2008
Mechanical Team Lead
Gulfstream Aerospace
12.2004 - 12.2007
Airframe & Powerplant Technician
L3 Communications
10.2003 - 11.2004
Airframe & Powerplant Technician
Reliance Aviation
12.2001 - 10.2003
Airframe & Powerplant Technician
Jet Harbor
07.1998 - 12.2001
Airframe & Powerplant Technician
Banyan Aircraft Services
01.1996 - 07.1998
Airframe & Powerplant Technician
Turbo Power
07.1994 - 01.1996
Aerospace Propulsion Specialist
U.S. Air Force
04.1991 - 06.1994
Initial Training - Aviation Maintenance
Global Jet Services
Master Technican - Aviation Maintenance
Flight Safety
Airframe And Powerplant - Aviation Maintenance
Broward College Aviation Institute
5 Level - Aerospace Propulsion
United States Air Force
Similar Profiles
Kevin HarrisKevin Harris
Avionic Technician Apprentice at Jet East AviationAvionic Technician Apprentice at Jet East Aviation
AMRITHRAJ AMRITHRAJ null
QA INSPECTOR- GOODS RECEIVING & SHIPPING at JET AVIATION DUBAI LLCQA INSPECTOR- GOODS RECEIVING & SHIPPING at JET AVIATION DUBAI LLC
Bhaskar HalderBhaskar Halder
Aircraft Engine Mechanic at Jet Aviation LLC.Aircraft Engine Mechanic at Jet Aviation LLC.