Cluster Vance

Load scrap cardboard into baler and compact it

• Used problem-solving skills to alleviate issues efficiently with minimal supervision.
• Completed daily, weekly, and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
• Installed new locks, door handles, and door closers.
• Performed minor wall repair, installed drywall, and applied wallpaper.

• Maintained restroom functionality by repairing leaking faucets, clogged toilets, and other equipment.
• Followed safety precautions to avoid personal injury and provide safe work environment.
• Installed new locks, door handles, and door closers.
• Removed outdoor debris and yard clippings into receptacles to properly maintain grounds.
• Properly handled, transported, and disposed of recycled materials.
• Cleaned and lubricated parts to keep equipment operating at peak performance.
• Inspected, tested and adjusted mechanical and electrical systems to facilitate proper functioning.
• Installed and maintained plumbing and HVAC systems.
• Replaced worn or broken parts on machines and equipment.
• Utilized variety of tools and test equipment to troubleshoot and diagnose equipment malfunctions.

• Read maps, followed oral, and written instructions and used GPS technology to make deliveries.
• Completed rush deliveries on tight timetables to satisfy customer needs.
• Completed on-time deliveries by choosing best and most efficient routes.
• Operated vehicle safely in highly congested areas with no traffic violations.

• Maintained daily, legible DOT log book and submitted corresponding documents.
• Operated with safety and skill to avoid accidents and delays.
• Minimized delays by planning and adjusting routes to account for changing weather and traffic conditions.
• Dropped and hooked trailers and changed configuration of equipment.
• Inspected trucks for malfunctions and reported vehicles to management for corrective action.
• Demonstrated safe driving by following regulations and safety procedures, resulting in zero accidents.
• Kept accurate records of cargo delivery times and vehicle maintenance to provide documentation to dispatch for billing and inventory purposes.

• Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
• Stored and maintained power tools and equipment for each job.
• Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
• Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Demonstrated expertise in use of cable reels, stripping tools, voltage detectors, and wire and cable cutters to complete fast-paced work.
• Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
• Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
• Performed routine and complex maintenance and repairs on various electrical equipment.
• Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Installed 120/208 volt systems and 347/600 volt systems.

• Spliced, joined and connected wire to fixtures and other electrical components.
• Followed state and local building regulations based on National Electrical Code.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Studied building schematics to determine location of wiring and equipment.
• Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
• Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.
• Installed 120/208 volt systems and 347/600 volt systems.

• Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
• Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
• Coordinated with other trades and general contractors to facilitate layout of recessed fixtures and architectural lighting.
• Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
• Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
• Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
• Performed routine and complex maintenance and repairs on various electrical equipment.
• Tested continuity of circuits in electrical wiring, equipment and fixtures using oscilloscopes.
• Installed and wired electrical transformers, service panels, and circuit breakers.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Installed safety and distribution components for electrical systems, such as switches, resistors and circuit-breaker panels.
• Installed 120/208 volt systems and 347/600 volt systems.

• Supervised technicians and assigned responsibilities.
• Generated and completed work orders for repairs, maintenance, and component replacement.
• Laid and repaired tile, carpet and [Type] flooring.
• Repaired and maintained both 3-phase and single-phase motors.
• Used arc welding, tig welding and plasmas cutting equipment to repair metal structures, components, and manufacturing machinery.
• Conducted mechanical and electrical maintenance of factory equipment.
• Troubleshot and repaired conveyors, pneumatic systems and steam boilers.
• Completed preventive maintenance to maintain production and equipment in accordance with safety protocols and company policy.
• Provided functional plumbing by repairing leaks, removing drain clogs and lubricating parts.
• Repaired and installed electrical wiring for light fixtures, power outlets and [Type] system.
• Maintained air conditioning systems by repairing malfunctioning systems and changing air intake filters.
• Adhered to established policies and standards to safely complete projects.
• Performed electrical and mechanical repairs of production equipment to minimize downtime.
• Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
• Completed daily, weekly, and monthly checklists on building equipment to maintain records of scheduled maintenance procedures.
• Installed new locks, door handles, and door closers.
• Troubleshot equipment breakdowns and performed preventive maintenance.
• Used problem-solving skills to alleviate issues efficiently with minimal supervision.
• Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
• Operated varied hand and power tools to complete repairs.
• Inspected and maintained equipment to keep items in top working condition.
• Developed and implemented strategies to improve maintenance processes.