Corey Holland

• Troubleshooting of failed Engines and compressors
• Assisted with training newer techs in proper troubleshooting
• Set, ran compressor checks and put new 1500 hp electric drives online.
• Lead mechanic on my rotation for all large horsepower 35 and 3600’s
• Repaired or replaced defective parts in gas compressor systems as necessary.
• Maintained compressors and equipment with scheduled cleaning, lubrication and filter replacements.
• Conducted routine tests on gas compressor systems to identify any potential problems or areas of improvement.
• Performed preventative maintenance on gas compressor systems and associated components to ensure safe and efficient operation.
• Trained junior technicians in the proper use of tools and safety protocols when working with gas compressors.
• Maintained detailed records of all repairs performed on gas compressor systems including parts used and labor costs incurred.
• Created work orders for each job assigned based on customer requirements.
• Repaired and installed components accurately by applying expertise, reading manuals and following diagrams.
• Followed up with customers after completion of a project to ensure satisfaction with the job done.
• Inspected and tested compressors, pumps, motors, valves, and other related equipment for proper operation.
• Troubleshot electrical problems in gas compressors such as wiring faults or control system malfunctions.
• Checked pressure gauges and meters to gather information about consumption rates, temperatures and pressures.
• Kept compressors operating at peak efficiency by performing regular scheduled maintenance.
• Used tools, equipment and company vehicles safely to prevent injuries.
• Ordered spare parts for repair jobs when needed from suppliers and vendors.
• Assisted with customer requests and answered questions to improve satisfaction.
• Managed time effectively to ensure tasks were completed on schedule and deadlines were met.

Shop and field service on heavy equipment, gensets, and farm equipment. I’ve performed all service and repair work from complete rebuilds, electrical troubleshooting, scheduled maintenance and PM’s, Hydraulic system repairs, and complete component replacement due to failures.

• Repaired broken or worn parts by welding or fabricating replacement parts.
• Adjusted and repaired systems to meet manufacturers' performance specifications.
• Maintained accurate records of all repairs performed on each unit serviced.
• Replaced faulty components such as seals, gaskets, valves, pistons and bearings.
• Inspected equipment regularly to ensure that it is operating safely and efficiently.
• Ensured compliance with safety regulations while performing maintenance tasks.
• Fabricated new parts to repair broken material.
• Performed major and minor repairs to small gas units on pump jacks
• Maintained a field of 3400 cat compressors

• Kept compressors operating at peak efficiency by performing regular scheduled maintenance.
• Repaired broken or worn parts by welding or fabricating replacement parts.
• Provided customer support via phone or email regarding questions about their compressor systems.
• Adjusted and repaired systems to meet manufacturers' performance specifications.
• Maintained accurate records of all repairs performed on each unit serviced.
• Replaced faulty components such as seals, gaskets, valves, pistons and bearings.
• Assembled new compressor systems from components such as motors, pumps, tanks and piping.
• Read and interpreted technical documents blueprints to disassemble and reassemble equipment for repairs and component replacements.
• Entered codes and instructions to program computer-controlled machinery.
• Inspected equipment regularly to ensure that it is operating safely and efficiently.
• Evaluated existing compressor systems for potential upgrades or modifications.
• Ensured compliance with safety regulations while performing maintenance tasks.
• Operated hoists to move heavy compressor components into place during installation.
• Fabricated new parts to repair broken material.
• Calibrated gauges and meters used in monitoring system performance levels.
• Dismantled failed compressors to assess damage and identify repair needs.
• Troubleshot electrical wiring issues to determine the cause of compressor failure.
• Identified and diagnosed compressor malfunctions using technical manuals, schematics, and other diagnostic instruments.
• Engaged in troubleshooting of machinery malfunctions through use of testing instruments and observation of defective equipment, listening and visually analyzing for sources of problems.
• Facilitated optimal efficiency in machinery with thorough cleaning, lubricating and adjustment of components.
• Assessed system operations to identify potential areas requiring maintenance services.
• Performed routine maintenance on compressors including oil changes, filter replacements, and belt adjustments.
• Conducted routine maintenance and repairs on mechanical systems and industrial equipment.
• Demonstrated strong problem-solving skills, resolving issues efficiently and effectively.
• Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Contributed innovative ideas and solutions to enhance team performance and outcomes.
• Provided support and guidance to colleagues to maintain a collaborative work environment.
• Utilized various software and tools to streamline processes and optimize performance.
• Completed routine maintenance and repair.
• Increased runtime by 65% and minimized down time.
• Extremely efficient with CAT-ET

I was a contract mechanic for XTO and Exxon, I had my own service truck, tools, diagnostic equipment and pressure testing equipment. While there some of my duties included :

• Diagnosing electrical issues with engines and compressors, control panels, Murphy systems, knock sensors and meters

•Installs of new packages and getting them online

•Topends on engines

•Replacing Valves on compressors

•Rebuilding Compressors(Gemini and Ariel)

•Replacing failed components in n the engine and compressor

•Servicing and repairing Dehi units

•Changing suction filters

•Making adjustments to the engine and compressor for peak performance , and also adjusting recycle.

• Kept compressors operating at peak efficiency by performing regular scheduled maintenance.
• Repaired broken or worn parts by welding or fabricating replacement parts.
• Adjusted and repaired systems to meet manufacturers' performance specifications.
• Maintained accurate records of all repairs performed on each unit serviced.
• Replaced faulty components such as seals, gaskets, valves, pistons and bearings.
• Read and interpreted technical documents blueprints to disassemble and reassemble equipment for repairs and component replacements.
• Entered codes and instructions to program computer-controlled machinery.
• Inspected equipment regularly to ensure that it is operating safely and efficiently.
• Evaluated existing compressor systems for potential upgrades or modifications.
• Ensured compliance with safety regulations while performing maintenance tasks.
• Operated hoists to move heavy compressor components into place during installation.
• Calibrated gauges and meters used in monitoring system performance levels.
• Dismantled failed compressors to assess damage and identify repair needs.
• Troubleshot electrical wiring issues to determine the cause of compressor failure.
• Identified and diagnosed compressor malfunctions using technical manuals, schematics, and other diagnostic instruments.
• Engaged in troubleshooting of machinery malfunctions through use of testing instruments and observation of defective equipment, listening and visually analyzing for sources of problems.
• Performed routine maintenance on compressors including oil changes, filter replacements, and belt adjustments.
• Managed time effectively to ensure tasks were completed on schedule and deadlines were met.
• Worked successfully with diverse group of coworkers to accomplish goals and address issues related to our products and services.
• Contributed innovative ideas and solutions to enhance team performance and outcomes.
• Operated a variety of machinery and tools safely and efficiently.
• Provided support and guidance to colleagues to maintain a collaborative work environment.
• Worked with cross-functional teams to achieve goals.
• Achieved cost-savings by developing functional solutions to problems.

• Assembled and tested engines using hand tools, power tools, measuring instruments, and other specialized equipment.
• Rebuilt engines from the ground up by installing pistons, crankshafts, camshafts, valves and other components.
• Organized supplies needed for each job so that all necessary parts were available at the time of assembly.
• Utilized hand tools and power tools to complete assembly tasks with precision.
• Assembled systems of gears by aligning and meshing gears in gearboxes.
• Dismantled engines to inspect for wear or damage and replaced worn or damaged parts as needed.
• Diagnosed problems with existing engines through visual inspection or computerized testing equipment.
• Participated in training sessions to stay current with new technologies and the latest Cat systems such as the ADEM series , also have some training on the new DET systems in heavy equipment.
• Interpreted technical documents, including diagrams, schematics, and instructions, to accurately assemble parts.
• Verified conformance of parts to stock lists or blueprints using calipers, gauges or micrometers.
• Cleaned engine parts using solvents and abrasive materials prior to assembly.
• Reassembled engines after repairs were completed and tested for proper operation.
• Adhered to all safety protocols and guidelines to prevent accidents and injuries.
• Performed repairs on defective engines including replacing gaskets, bearings, seals and other components.
• Kept work areas organized and clean to maximize productivity.
• Maintained an organized work area to ensure efficient workflow.
• Adjusted valve clearances according to manufacturer specifications.
• Checked engine components for accuracy of fit and alignment prior to assembly.
• Tuned engines using a variety of diagnostic equipment to optimize performance characteristics such as horsepower, torque and emissions output.