Corey Thompson

• Inspected wiring harnesses, circuit breakers and other components for damage or defects.
• Installed wire bundles and circuits in accordance with blueprints and technical manuals.
• Tested aircraft electronic systems to ensure proper functioning of all components.
• Repaired faulty connections, replaced defective parts and re-routed wiring as needed.
• Assisted in the design, fabrication and installation of new electrical systems.
• Maintained records of all maintenance activities performed on aircraft electrical systems.
• Conducted inspections of aircraft to identify any potential problems with their electrical systems.
• Diagnosed faults using specialized test equipment such as multimeters, oscilloscopes and logic analyzers.
• Ensured compliance with FAA regulations when performing maintenance tasks on aircraft electrical systems.
• Performed preventive maintenance checks on aircraft electrical components to minimize downtime due to system failures.
• Calibrated instruments used in testing aircraft electrical systems.
• Assisted in the development of training materials for technicians working on aircraft electrical systems.
• Reviewed schematics and drawings before beginning work on an aircraft's electrical system.
• Replaced worn out or damaged wires, cables and connectors according to manufacturer specifications.
• Replaced defective parts and corrected problems using various hand and power tools.
• Repaired or installed new wiring, boxes, antennas and other system pieces.
• Sourced or fabricated replacement parts to correct faults with avionics systems.

Duties: Fabrication, installation and operational support of instrumentation

and data acquisition systems. I've built and installed wiring harnesses in aircraft such

as F/A-18, AH-1, E-2, C-2, P-3, H-60, H-53, V-22, C-130, Fire Scout UAV, Global Hawk (UAV) and other various aircraft. I've also worked with accelerometers, strain gauges, 1553 bus monitor / simulator, pressure transducers, position pots, recorders, cameras, and high speed video, utilizing wiring diagrams and technical information provided by engineers and senior technicians to develop, fabricate, test, install, maintain and evaluate the prototype instrumentation packages. Examples of some of the packages are: system racks, power distribution units (PDU's), Video System wiring (harbor cable), coax, twin-ax, tri-ax, Ethernet, twisted-shielded pair, multi-pin connectors, parallel bus wires and fiber optics.

Perform pre and post-flight operational checks on prototype instrumentation systems such as

ASVS, JPALS and NEXGEN, using specialized equipment such as multi-meters,

Toughbook laptops with software programs such as Omega Manager, Data Reformat Utility while maintaining compliance with the NAVAIR 01-1A-505 installation practices.

Perform "self-check" prior to notification of safety and inspection /

Project Liaison Office (PLO) of all work completed.

• Duties: Fabrication, installation and operational support of instrumentation and data acquisition systems. I've built and installed wiring harnesses in aircraft such as F/A-18, AH-1, E-2, C-2, P-3, H-60, H-53, V-22, C-130, Fire Scout UAV, Global Hawk (UAV) and other various aircraft. I've also worked with accelerometers, strain gauges, 1553 bus monitor / simulator, pressure transducers, position pots, recorders, cameras, and high-speed video, utilizing wiring diagrams and technical information provided by engineers and senior technicians to develop, fabricate, test, install, maintain and evaluate the prototype instrumentation packages. Examples of some of the packages are system racks, power distribution units (PDU's), Video System wiring (harbor cable), coax, twin-ax, tri-ax, Ethernet, twisted-shielded pair, multi-pin connectors, parallel bus wires and fiber optics.

Perform pre- and post-flight operational checks on prototype instrumentation systems such as

ASVS, JPALS and NEXGEN, using specialized equipment such as multi-meters, Toughbook laptops with software programs such as Omega Manager, Data Reformat Utility while maintaining compliance with the NAVAIR 01-1A-505 installation practices.

Perform "self-check" prior to notification of safety and inspection /

Project Liaison Office (PLO) of all work completed.

• Performed troubleshooting and repairs on various aircraft electrical systems such as generators, starters, alternators and motors.
• Inspected wiring harnesses, circuit breakers and other components for damage or defects.
• 
  
• Installed wire bundles and circuits in accordance with blueprints and technical manuals.
• Tested aircraft electronic systems to ensure proper functioning of all components.
• Repaired faulty connections, replaced defective parts and re-routed wiring as needed.
• Assisted in the design, fabrication and installation of new electrical systems.
• Maintained records of all maintenance activities performed on aircraft electrical systems.
• Diagnosed faults using specialized test equipment such as multimeters, oscilloscopes and logic analyzers.
• Ensured compliance with FAA regulations when performing maintenance tasks on aircraft electrical systems.
• Calibrated instruments used in testing aircraft electrical systems.
• Provided support for ground crew members during preflight inspections.
• Assisted in the development of training materials for technicians working on aircraft electrical systems.
• Reviewed schematics and drawings before beginning work on an aircraft's electrical system.
• Replaced worn out or damaged wires, cables and connectors according to manufacturer specifications.
• Replaced defective parts and corrected problems using various hand and power tools.
• Repaired or installed new wiring, boxes, antennas and other system pieces.
• Operated ohmmeters, ammeters and time domain reflectometers.
• Sourced or fabricated replacement parts to correct faults with avionics systems.
• Assembled prototypes and conducted thorough tests to validate designs.

• Conducted research to develop and improve engineering processes and products.
• Performed tests on prototype designs to evaluate product performance.
• Identified potential problems with existing designs and provided solutions.
• Drafted technical drawings and diagrams for engineering projects.
• Collaborated with engineers to ensure accuracy in specifications, tolerances, safety requirements.
• Provided technical support during the installation of new equipment.
• Troubleshot mechanical issues related to production process flow.
• Maintained detailed records of all engineering activities including test results, calculations and other relevant information.
• Inspected components for conformance with specified quality standards prior to shipment.
• Ran operational tests on systems and equipment to reinforce proper processes and remedy malfunctions.
• Liaised with staff to develop technical plans or coordinate progress of projects using automated information systems.
• Tested circuitry and electronic components according to engineering instructions, technical manuals or knowledge of electronics.
• Performed diagnostics and testing to locate root causes and resolve issues for optimal performance.
• Read and interpreted technical manuals, drawings and schematics to make accurate repair decisions.
• Performed preventive, predictive and corrective maintenance to keep machinery running at optimal levels.
• Assembled electrical systems or prototypes using hand tools or measuring instruments.
• Maintained system logs or manuals to document testing or operation of equipment.
• Set up and operated specialized or standard test equipment to diagnose, test or analyze performance of electronic components, assemblies or systems.
• Leveraged outstanding communication, interpersonal and people skills to work well with clients.
• Improved electrical installations by standardizing procedures for production and field personnel.
• Built, calibrated and maintained electrical instruments used in design development processes.
• Compiled and maintained records documenting engineering schematics and installed equipment.
• Constructed and evaluated electrical components for consumer electronics applications.

Duties: Fabrication, installation and operational support of instrumentation and data acquisition systems. I've built and installed wiring harnesses in aircraft such as F/A-18, AH-1, E-2, C-2, P-3, H-60, H-53, V-22, C-130, Fire Scout UAV, Global Hawk (UAV) and other various aircraft. I've also worked with accelerometers, strain gauges, 1553 bus monitor / simulator, pressure transducers, position pots, recorders, cameras, and high-speed video, utilizing wiring diagrams and technical information provided by engineers and senior technicians to develop, fabricate, test, install, maintain and evaluate the prototype instrumentation packages. Examples of some of the packages are: system racks, power distribution units (PDU's), Video System wiring (harbor cable), coax, twin-ax, tri-ax, Ethernet, twisted-shielded pair, multi-pin connectors, parallel bus wires and fiber optics.

Perform pre- and post-flight operational checks on prototype instrumentation systems such as

ASVS, JPALS and NEXGEN, using specialized equipment such as multi-meters,

Toughbook laptops with software programs such as Omega Manager, Data Reformat Utility while maintaining compliance with the NAVAIR 01-1A-505 installation practices.

Perform "self-check" prior to notification of safety and inspection /

Project Liaison Office (PLO) of all work completed.

• Duties: Perform multiple tasks needed to fabricate/assemble, test, troubleshoot, and perform operational checks of various electrical equipment racks, electrical harnesses, subassemblies, junction box assemblies and multiple cable assemblies to Mil. Spec standards. Perform continuity checks of electrical harnesses, subassemblies and equipment racks utilizing assigned technical documentation with Power meters and other testing equipment. Also assembled kits with drawings, trouble reports, wire run lists and schematics used in the assembly, for testing and troubleshooting of various electrical systems.
• Projects I have worked on within the company are, 36 HMMWV 1 System for U.S Army Hummer Truck Introduction Monitoring Program & DDG 112 U.S Navy Ship.