Corry Barnum

• Diagnosed and repaired electrical systems to ensure operational efficiency.
• Conducted routine maintenance on electrical equipment to prevent downtime.
• Collaborated with engineering team to implement system upgrades and improvements.
• Trained junior technicians on safety protocols and best practices in electrical work.
• Developed preventative maintenance schedules to enhance equipment reliability.
• Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
• Tested wiring and other system parts for electrical flow and function.
• Disconnected and removed motors and pumps.
• Tested, troubleshot, and calibrated equipment in shop and field.
• Maintained detailed records of all repairs, maintenance tasks, and inventory for accurate tracking purposes.
• Performed preventive maintenance tasks to verify proper working condition of electrical panels and conduits.
• Installed, adjusted and calibrated electrical equipment and instrumentation to maintain proper performance.
• Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
• Obtained measurements and readings using volt and ohm meters, meggers, IC testers, and dial indicators.
• Conducted comprehensive inspections of electrical systems to identify potential issues before they escalated.
• Interpreted blueprints, schematics, drawings, and layouts to complete repairs.
• Collaborated with cross-functional teams to complete complex projects within deadlines.
• Managed multiple projects simultaneously while maintaining high levels of quality control throughout each project''s lifecycle.
• Utilized advanced diagnostic tools such as multimeters, oscilloscopes, and thermal imaging cameras to accurately diagnose electrical issues.

Maintenance Tech. III

Responsible for maintaining robot work cells .

Troubleshooting advanced electrical systems, power and control.

HMI's

• Reduced system downtime with proactive monitoring, timely troubleshooting, and efficient issue resolution.

• Repaired and replaced equipment, electrical wiring and fixtures.
• Tested circuit continuity to determine electrical compatibility and component safety.
• Attached power cables to equipment such as electric range and motor.
• Observed functioning of installed equipment or system to detect hazards and need for adjustments, relocation or replacement.
• Tested electrical systems functionality and continuity of circuits using devices such as ohmmeters, voltmeters and oscilloscopes.
• Troubleshot and repaired malfunctioning systems and components.
• Followed state and local building regulations based on National Electrical Code.
• Spliced, joined and connected wire to fixtures and other electrical components.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment.
• Inspected electrical systems, equipment and components to identify hazards, defects and need for adjustment or repair.
• Connected wires to circuit breakers, transformers and other components.
• Installed, maintained and repaired electrical wiring, controls and lighting systems.

• Installed, maintained and repaired electrical wiring, controls and lighting systems.
• Connected wires to circuit breakers, transformers, and other components.
• Repaired and replaced equipment, electrical wiring and fixtures.
• Troubleshoot And Repair Large Automatic Transfer/Manual Presses
• Inspected transformers and circuit breakers for malfunctions.

• Employed as contract Industrial Electrician until hired at current position.
• Troubleshoot and repair Industrial Automatic/manual Transfer stamping presses.
• Troubleshoot/repair Industrial small to large scrap conveyor systems.
• Electrical Power/Control, Motor drives installations.
• Preventive maintenance of Automatic/ Manual stamping presses
• Work with Production, Maintenance, And Engineering to ensure minimal downtime of All production processes.

• Completed on-time deliveries by choosing best and most efficient routes.

• Installed new equipment and modified existing equipment.
• Conducted preventive maintenance on equipment.
• Removed and replaced malfunctioning and worn parts to maximize system longevity and performance.
• Organized and managed smooth preventive maintenance tasks such as evaluating part functionality, cleaning components and removing old seals and gaskets.
• Located and addressed electrical connection issues such as frayed wires and worn insulation to prevent larger problems.
• Applied functional knowledge and troubleshooting abilities to isolate and diagnose diverse faults.
• Efficiently installed electrical systems and components with careful analysis of technical schematics and specifications.
• Kept robust spare parts inventory based on expected needs to minimize downtime.
• Installed, tested and calibrated commercial electrical equipment to meet use demands.
• Safely installed new electrical components, fixtures and motors in addition to testing systems to enhance power flow.
• Inspected electrical equipment to assure it was operating correctly.
• Completed high-quality products with skilled assembly of systems, supports and connections.
• Identified issues, analyzed information and provided solutions to problems.

All aspects of woodworking .

• Fabricated custom furniture, shelving and cabinets and installed in specified locations.
• Operated tools to cut, shape and smooth lumber and other construction materials.

• Performed root-cause analysis on defective components, disassembling them to identify issues and completing necessary repairs.
• Diagnosed equipment issues by analyzing error messages and testing results.
• Examined parts for defects such as breakage or excessive wear.
• Observed and tested operation of machinery or equipment to diagnose malfunctions using voltmeters or other testing devices.
• Demonstrated equipment functions and features to machine operators.
• Analyzed blueprints and manufacturer instructions to take apart and reassemble machinery for maintenance and component replacements.
• Determined sources of problems resulting in machinery malfunction, utilizing evaluation instruments and visual and auditory observation to troubleshoot defective equipment.
• Cleaned, lubricated and calibrated machinery components to maintain peak operating performance.
• Resolved problems, improved operations and provided exceptional service.
• Exceeded goals through effective task prioritization and great work ethic.
• Prepared a variety of different written communications, reports and documents to ensure smooth operations.
• Demonstrated respect, friendliness and willingness to help wherever needed.
• Oversaw daily operations to ensure high levels of productivity.

Rewound Electric Motors

Installed And Serviced Generac Stand By generator Systems

Warranty And Start ups of New Generac Generator Systems.

Welding Of Mandrels for Automotive Parts Manufacturing

Installation Warranty Startups And service of Generac Standby Generator Systems

• Wrote and revised maintenance procedures.
• Positively engaged with customers and maintained professional appearance at all times as company representative.

• Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations.
• Handled installation of electrical components by splicing, joining and connecting wire.
• Spliced, joined and connected wire to accurately install new electrical systems.
• Adhered to electrical and building codes when installing and repairing electrical systems or components.
• Used various measuring and testing instruments such as ammeters, ohmmeters, voltmeters and testing lamps to complete installations and repairs.
• Installed new electrical components and fixtures safely and tested systems to enhance power flow.
• Pulled EMT and PVC conduit wire according to plans and code requirements.
• Terminated wiring and connected circuits with correct techniques.
• Optimized work readiness with organized tools and spaces.
• Repaired and checked supporting equipment for electrical systems such as brackets and hangers.
• Completed and checked wiring tasks through wall and floor conduits and holes accurately.
• Repaired systems, replaced malfunctioning parts, and supported electrical installations.
• Studied building schematics to determine location of wiring and equipment.
• Replaced and repaired lighting fixtures and electrical control and distribution equipment, including switches, relays and circuit breaker panels.
• Interpreted drawings, wiring diagrams, flow charts and written descriptions of project requirements.
• Connected appropriate parts to deliver power to audio and visual equipment, signaling devices and heating or air conditioning systems.

Rewound Electric Motors

Rebuilt Pumps

• Completed customer orders and warranty services according to manufacturer specifications.
• Maintained accurate records of time and materials required to perform repairs and service.
• Tested newly installed equipment to determine proper functionality and compliance with regulations.
• Replaced damaged, missing or defective parts with new and refurbished components
• Service work In many Factories .Troubleshoot and repaired machinery

• Repaired light fixtures, controls, switches, relays and circuit breaker panels based on detailed evaluations.
• Handled installation of electrical components by splicing, joining and connecting wire.
• Adhered to electrical and building codes when installing and repairing electrical systems or components.
• Installed new electrical components and fixtures safely and tested systems to enhance power flow.
• Worked daily in new construction Under direct supervision of Journeyperson and or/ Master Electrician at all times.

• Proposed layout and location modifications and installations in compliance with OEM, OSHA, NEC and company and local codes.
• Observed equipment functioning to detect electronic and mechanical hazards or problems for service, repair or replacement.
• Maintained neat and clean work area to eliminate hazards.
• Obtained forklift and aerial lift platform licenses to meet optimum labor utilization.
• Fabricated fixtures, stands and covers and assembled components from sketches and drawings.
• Welded structural type steel, aluminum, stainless steel and pipe materials using tig, mig and stick welding techniques.
• Identified and specified required parts to repair and rebuild manufacturing equipment.
• Liaised with staff to discuss equipment performance issues and formulate improvement ideas.
• Installed and modified equipment to minimize material waste, facilitate future maintenance and avoid hazardous and unreliable equipment performance.
• Investigated electrical malfunctions with ammeter, multimeter and temperature probe test instruments to determine problems and apply solutions.
• Installed electrical components in housings by soldering parts to assemblies.
• Oversaw daily operations to ensure high levels of productivity.
• Resolved problems, improved operations and provided exceptional service.
• Much work with Plcs Installations and troubleshoot.

• Proposed layout and location modifications and installations in compliance with OEM, OSHA, NEC and company and local codes.
• Observed equipment functioning to detect electronic and mechanical hazards or problems for service, repair or replacement.
• Maintained neat and clean work area to eliminate hazards.
• Fixed, serviced and mounted pumps, gearboxes and piping systems utilizing all necessary tools and machinery.
• Fabricated fixtures, stands and covers and assembled components from sketches and drawings.
• Obtained forklift and aerial lift platform licenses to meet optimum labor utilization.
• Welded structural type steel, aluminum, stainless steel and pipe materials using tig, mig and stick welding techniques.
• Identified and specified required parts to repair and rebuild manufacturing equipment.
• Liaised with staff to discuss equipment performance issues and formulate improvement ideas.
• Installed and modified equipment to minimize material waste, facilitate future maintenance and avoid hazardous and unreliable equipment performance.
• Investigated electrical malfunctions with ammeter, multimeter and temperature probe test instruments to determine problems and apply solutions.
• Installed electrical components in housings by soldering parts to assemblies.
• Oversaw daily operations to ensure high levels of productivity.
• Resolved problems, improved operations and provided exceptional service.