Summary
Overview
Work History
Education
Certification
Timeline
Generic

Cory Mefford

Mount Sterling,IL

Summary

  • Hardworking Welder skilled in MIG, flux and stick welding. Talented at operating drill press and crane. Strong background in welding and metal fabrication.
  • Able to handle continuous physical work in different environments while exceeding standards. Careful to use correct techniques for different types of materials and fits. Expert with wide range of power tools and equipment.
  • Responsible and punctual Welder experienced in interpreting blueprints and drawings to perform tasks. Self-starter skilled in operating heavy equipment, supervising crews and maintaining safety standards. Expert at following procedures and protocols and safely working in enclosed spaces.
  • Enthusiastic Welder committed to exceeding project expectations. Expert in preparing surfaces for welding by removing unwanted materials or grime and setting up proper equipment. Trained in operation and maintenance of related tools.
  • Seasoned Welder with 13 years of hands-on experience setting up and operation welding equipment to assemble metal structures. Diligent individual focused on maintaining high productivity and safety targets. Dexterous team player comfortable working with little to no supervision.
  • Highly-motivated employee with desire to take on new challenges. Strong worth ethic, adaptability and exceptional interpersonal skills. Adept at working effectively unsupervised and quickly mastering new skills.

Overview

11
11
years of professional experience
1
1
Certification

Work History

Welder

Manchester Tank
Quincy, IL
11.2012 - 01.2024
  • Fabricated and welded components to assemble structural forms, such as machinery frames, tanks, pressure vessels, and furnace shells.
  • Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
  • Inspected completed work for conformance to specifications using various instruments.
  • Maintained a clean working environment by removing scrap metal from work areas.
  • Gathered required materials for each project in order to meet production deadlines.
  • Performed preventative maintenance on welding tools and equipment.
  • Trained apprentices in safety procedures and use of tools, equipment used during fabrication, welding operations.
  • Read blueprints, drawings related to projects in order to determine proper dimensions of components being fabricated, welded together.
  • Ensured that all welds met code requirements through visual inspection methods such as radiography testing where applicable.
  • Adjusted settings on machines such as current level so it matches the specifications outlined in blueprints and drawings.
  • Set up equipment and welded parts according to welding chart specifications and type.
  • Used welding skills to help repair and maintain heavy-duty machinery.
  • Followed safety guidelines through proper machine guarding and lockout and tagout procedures.
  • Constructed templates and jigs for fabrication according to blueprints.
  • Repaired broken or cracked parts using cutting torches and welding equipment.
  • Set up welding machines based on the job at hand.
  • Operated manual or semi-automatic flame-cutting equipment to cut metal for fabrication of products.
  • Utilized oxyacetylene torches for preheating metals prior to welding or bending them into desired shapes.
  • Performed gas tungsten arc welding with filler rods as needed.
  • Applied shielded metal arc welding techniques with electrodes in flat, horizontal vertical positions as well as overhead applications.
  • Conducted flux core arc welding when applicable.
  • Installed new plant equipment per manufacturer's instructions while adhering to safety protocols.
  • Cleaned joints before beginning any type of welding process by chipping off slag with a hammer or wire brush.
  • Determined appropriate filler metal type based on joint design and material being joined together.
  • Troubleshot problems related to welds including porosity issues caused by improper shielding gas flow rates.
  • Read blueprints and drawings and took measurements to plan layout and procedures.
  • Laid out, positioned, aligned and secured parts and assemblies with straightedges, squares and calipers.
  • Scraped off excess spatter using portable grinders and arc-cutting equipment.
  • Operated manual and semi-automatic welding equipment in vertical, horizontal and overhead positions.
  • Repaired structures by dismantling, reshaping and reassembling metal components with cutting torches and hand tools.
  • Maximized shop organization and equipment lifespan by maintaining equipment.
  • Prepared broken parts for welding by properly grooving and scarfing surfaces.
  • Monitored fitting, burning and welding processes to avoid overheating parts, warping, shrinking, distortion and expansion of materials.
  • Operated manual and semi-automatic welding equipment to fuse metal segments together.
  • Completed minor torch ups with MIG welders.
  • Determined welding strategies using metallurgy knowledge, geometry and welding techniques.
  • Adjusted gas flow and pressure to create and maintain desired flames.
  • Heated and dissolved metal parts to obtain molten substance used in welding or extrusion.
  • Conducted hydrostatic and tolerance tests on welded parts to verify weld quality and conformance to specifications.
  • Welded components in flat, vertical or overhead positions.
  • Welded fabrication materials, continuously checking for safety and quality.
  • Prepared material surfaces for welding by removing scale, rust or other foreign matter.
  • Prepared workpiece edges by grinding, cutting, buffing or bending to verify snug fit.
  • Adjusted weld machines to correct settings for precision and waste reduction.
  • Cut, contoured and beveled metal and structural shapes to achieve accurate dimensions.
  • Positioned and clamped workpieces together and properly assembled in jigs and fixtures.
  • Aligned and clamped workpieces using rules, squares or hand tools.
  • Produced work using appropriate welding techniques, metallurgy knowledge and engineering requirements.
  • Measured workpieces with straightedges or templates to conform with specifications.
  • Cleaned and inspected parts and assemblies at each production stage and documented production defects.
  • Recognized, set up and operated shielded metal arc and gas metal arc welding equipment.
  • Positioned and secured workpieces using hoists, wire and banding machines or hand tools.
  • Safely ignited torches and monitored surroundings to proactively identify hazards.
  • Detected faulty operation of equipment or defective materials and notified supervisors.
  • Marked or tagged material with job number, piece marks and other identifying marks.
  • Selected and installed torches, filler rods and flux according to welding chart specifications.
  • Determined equipment and welding methods, applying knowledge of metallurgy, geometry and welding techniques.
  • Connected and turned regulator valves to activate and adjust gas flow and pressure and obtain desired flames.
  • Melted and applied solder along adjoining edges of workpieces to solder joints.

Self Employed

Self-employeed
Quincy, IL
02.2020 - 09.2021
  • Assisted with basic maintenance tasks such as sweeping, mopping, painting, and cleaning.
  • Transported heavy items from one location to another using hand trucks or carts.
  • Organized tools, supplies, and equipment needed for specific jobs according to instructions provided by supervisor.
  • Prepared surfaces prior to painting by sanding, scraping, patching holes, and filling cracks with putty or plaster.
  • Installed insulation into walls using blow guns or similar tools while adhering to safety guidelines.
  • Cleaned work area after job completion ensuring all debris is properly disposed of.
  • Inspected finished projects for quality assurance purposes before handing off to customer.
  • Lifted objects weighing up to 50 pounds without assistance when necessary.
  • Operated various power tools such as drills and saws safely while following manufacturer's instructions.
  • Ensured that all personal protective gear was worn at all times while on the job site.
  • Performed physical activities requiring heavy lifting, walking and standing for long periods of time.
  • Completed variety of physical labor tasks.
  • Understood and followed oral and written directions.
  • Used picks and shovels to dig, spread and level dirt and gravel.
  • Read plans, instructions or specifications to determine work activities.
  • Operated pallet jacks and forklifts to load and unload supplies and materials.
  • Performed demanding physical work over extended periods and modeled positive attitude.

Stocker

County Market Grocery
Quincy, IL
01.2019 - 02.2020
  • Received and processed incoming shipments of merchandise.
  • Recorded quantity, type and value of materials or items received.
  • Stocked shelves with newly arrived products.
  • Arranged merchandise in an attractive manner to promote sales.
  • Maintained accurate inventory records through manual systems and and or computerized databases.
  • Inspected stock for damage or defects and reported issues to management.
  • Organized storage areas for efficient use of space.
  • Provided customer service by answering questions about product location, price and availability.
  • Followed safety procedures when handling hazardous material or dangerous goods.
  • Ensured that all products were labeled properly before stocking the shelves.
  • Maintained a neat, clean and orderly warehouse environment at all times.
  • Monitored expiration dates of perishable items to ensure freshness.
  • Removed outdated products from shelves in accordance with company policy.
  • Operated motorized equipment such as forklifts, pallet jacks or order pickers as required.
  • Completed documentation related to receiving, stocking, returns and other activities accurately.
  • Stocked shelves with new merchandise and checked for outdated or damaged items.
  • Lifted materials of varied weights on regular basis.
  • Faced products on shelves and displays to meet company policies.
  • Replenished items to maintain stock availability.
  • Maintained neat, safe and orderly workspace to prevent accidents and injuries.
  • Followed proper stock rotation procedures to minimize obsolescence and remove out of date items from sales floor.
  • Stocked shelves, racks and bins with new or transferred merchandise.
  • Kept work areas clean, neat and organized for optimal productivity and worker safety.
  • Demonstrated great teamwork skills with staff members involved in production and transport.
  • Operated forklift and pallet jack to transport heavy loads.
  • Read orders to obtain item numbers and located merchandise in bins or on shelves.

Education

Some College (No Degree) - Warehouse And Distribution

Kaskaskia College
Centralia, IL

Certification

  • Warehouse and Distribution
  • Forklift Operator License OSHA approved
  • Culinary 1 Certificate
  • Certificated Welder through the American Welding Society

Timeline

Self Employed

Self-employeed
02.2020 - 09.2021

Stocker

County Market Grocery
01.2019 - 02.2020

Welder

Manchester Tank
11.2012 - 01.2024

Some College (No Degree) - Warehouse And Distribution

Kaskaskia College
  • Warehouse and Distribution
  • Forklift Operator License OSHA approved
  • Culinary 1 Certificate
  • Certificated Welder through the American Welding Society

Similar Profiles

CREATE PROFILE
Cory Mefford