Dakota Young
Milan,USA
Summary
Looking for long-term employment and growth, I'm an Electrical Automation and Controls professional, and a mechanical engineer with a strong track record of keeping manufacturing operations running safely, efficiently, and reliably. I specialize in troubleshooting, maintaining, and improving industrial control systems in high-demand production environments, where downtime is not an option. My experience spans across Allen-Bradley PLC platforms, PowerFlex VFDs, FactoryTalk systems, industrial networking/IP addressing, and complex motor control circuits. I bring a practical, boots-on-the-floor approach to automation, backed by solid electrical fundamentals and mechanical repair experience in die-cast and packaging operations. I've also worked extensively with Schneider packaging equipment in fast-paced manufacturing settings. From shaft replacements to sprockets, chains, motors, gear boxes, and writing small programs and programming basic, simple stuff. RsLogix troubleshooting: I've supported food manufacturing operations where safety, quality, and compliance matter, leveraging SAP and IBM Maximo for work order execution, asset reliability, and preventive maintenance. I'm known as a reliable troubleshooter who can quickly isolate faults, communicate clearly under pressure, and drive permanent fixes, not just temporary workarounds. Beyond technical skill, I lead by example. I take ownership of problems, support operators and technicians, and hold myself to a high standard of workmanship and safety. I thrive in environments that demand accountability, teamwork, and continuous improvement.
Overview
7
7
years of professional experience
1
1
Certification
Work History
Reliability Technician
Georgia-Pacific
Jackson, TN
01.2025 - Current
- Built new automation cells and setup, programmed the Fanuc robots for new pallet patterns, and troubleshot and repaired the Fanuc robots. I am a certified tech from Fanuc.
- Created or interpreted engineering drawings, schematic diagrams or blueprints.
- Implemented lean manufacturing principles to streamline operations.
- Over the packaging department for the mechanical maintenance and electrical repair of Schneider packaging case packers, Phoenix stretch wrappers, and Kaufman cells. Strong knowledge of palletizers and packaging equipment. I have also worked on Ital-Pack packaging equipment, along with different brands of stretch wrappers, palletizers, and Fanuc robots in corrugated and packaging.
- Proactively identify hazards, and validate controls that exist to mitigate risk, and ensure a safe work environment is maintained.
- Troubleshoot, identify, and perform corrective and preventive maintenance on electrical, mechanical, pneumatic, and hydraulic systems.
- Apply and teach simple problem-solving methods, such as the 5 Whys.
- Coordinate with other divisions to ensure that projects are completed successfully.
- Know and understand all identified Key Performance Indicators, and proactively execute action plans to close the gaps.
- Principle-Based Management
- Strong troubleshooting of mechanical failures and root cause of why something failed.
- Assisted in training new technicians on best practices for equipment maintenance.
- Analyzed data from vibration analysis program to identify potential problems with rotating machinery.
- Provided technical support to plant personnel regarding troubleshooting techniques for improved reliability of production systems and equipment.
- Installed new components into existing systems and equipment according to established protocols while ensuring safety standards were met at all times.
- Reviewed design drawings of production systems and equipment for accuracy before installation.
- Assisted with setting up production equipment for sound, lighting, and film.
- Utilized computer-based software applications for tracking trends in machine performance and predicting failures.
- Performed preventive maintenance to enhance equipment reliability and lifespan.
- Performed system startups, mechanical troubleshooting and corrective action management for identified issues.
- Worked closely with supervisors, engineers, technicians, operators, providing guidance where required regarding Mechanical Planning matters.
- Documented work performed during troubleshooting sessions utilizing schematics and diagrams and detailed notes as needed.
- Performed troubleshooting activities to identify any issues with the mechanical systems.
Maintenance Technician Electrical
ADM
Jackson, TN
06.2023 - 01.2025
- Installation maintenance and troubleshooting of electrical systems and instrumentation devices used to monitor and control industrial processes. work to ensure that all electrical equipment, control systems, and instrumentation are functioning correctly and safely. supporting the overall efficiency of the operations.
- Maintain accurate records of work completed, repairs, calibration tests, and equipment status.
- Regularly inspect, test, and maintain electrical and instrumentation systems to identify issues and perform repairs. This includes troubleshooting faults, replacing faulty components, and ensuring minimal downtime in operations.
- Utilize strong knowledge in electrical systems and instrumentation. Troubleshoot and maintain 12.4kv and 480-volt power distribution, 120 volt and 24-volt control circuits, ple. variable frequency drives and robotics
- Responsible for all of B shifts maintenance and electrical and instrumentation systems.
- Packaging lines, convevors, blowers, Fanuc robots, routing systems and flow controls. PLC ladder logic troubleshooting and sometimes writing small programs. Allen Bradley drives and plc troubleshooting
- Troubleshot complex electrical and mechanical issues with minimal downtime.
- Performed routine maintenance by inspecting drives, motors or belts.
- Inspected, operated or tested machinery or equipment to diagnose machine malfunctions.
- Assembled, installed or repaired electrical or electronic components and pipe systems.
- Installed new pumps, compressors, boilers and other mechanical systems.
- Assisted in the installation of new machinery and equipment.
- Read and interpreted equipment and work orders to properly perform required maintenance services.
- Performed preventive maintenance tasks, including lubrication and cleaning of machines and equipment.
- Installed new systems, replacement parts, and components to maintain proper operation.
- Assisted with troubleshooting electrical and mechanical issues to restore operations swiftly.
Maintenance Technician
Pace Industries
Jackson, TN
09.2021 - 06.2023
- Responsible for troubleshooting electrical control circuits and repairing and maintaining all electrical systems in the facility; Troubleshoot, repair, and maintain all hydraulic and pneumatic systems as needed; Responsible for repairing gas fired and electrical furnaces and making sure they are properly maintained on a routine basis. be repairing transformers, buss bars, water tower, pumps, and compressors as needed; Capable of assisting or repairing PLC hardware for Die Cast and other plant equipment; Extremely familiar with Allen Bradley machinery
- Diagnosed mechanical issues and executed timely repairs to reduce downtime.
- Mechanical repair of manufacturing equipment for die casting of lawn mower parts. Also rewired panels from start to finish, and troubleshot PLC ladder logic.
- Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
- Implemented troubleshooting techniques to resolve issue.
Process Engineer
Kilgore Flares
Toone, TN
06.2019 - 09.2021
- Responsible for designing, implementing, and maintaining automated control systems that support the manufacturing of defense-grade pyrotechnic flares. involves developing PLC/HMI programs, troubleshooting electro-mechanical equipment, and optimizing process reliability to ensure safe, consistent, and efficient production. collaborate closely with production, maintenance, quality, and safety teams to integrate new equipment, upgrade legacy systems, and implement automation improvements. also ensure compliance with stringent safety and regulatory standards, perform root-cause analysis on equipment issues, and support continuous-improvement initiatives to enhance throughput and reduce downtime.
- Collaborated with cross-functional teams to implement process enhancements.
- Implemented changes in the process to increase efficiency, safety, and quality.
- Analyzed production data to identify areas of improvement and reduce costs.
- Provide technical and leadership direction for automation and control-system activities across an $8o million modernization and expansion program. oversee the design, integration, and commissioning of advanced PLC, HMI, and SCADA systems, ensuring that all automation strategies align with project goals, safety requirements, and production capacity targets. coordinate cross functional teams including engineering, operations, maintenance, safety, and outside contractors driving schedules, establishing standards, and resolving complex technical challenges. leading equipment specification and procurement, managing controls-related budgets and timelines, and guiding the transition from legacy systems to modern, high-reliability automation platforms. Through proactive leadership and technical expertise, help ensure the project delivers improved throughput, reduced risk, and long-term operational resilience. Allen Bradley drives. Different brands of vfds
- Collaborated with other departments such as Quality Control and Maintenance on projects related to process engineering initiatives.
- Developed process designs for new and existing manufacturing processes.
- Conducted experiments to optimize product yield and improve process control.
- Identified potential risks associated with new technologies prior to implementation.
- Ensured compliance with safety regulations during all stages of the manufacturing process.
Education
Associate of Science - Engineering Systems Technology
Jackson State Community College
Jackson, TN05.2022
High School Diploma -
Adamsville Junior / Senior High School
Adamsville, TN05-2020
Skills
- Industrial electrical systems
- Equipment maintenance
- Electrical troubleshooting
- PLC programming
- Hydraulic systems
- Process optimization
- NX Welding
- Voltmeter
- Electrical instrumentation
- Sales pipeline
- Specialized industrial tools
- Blueprint specification interpretation
- Contracts
- Project management software
- Automotive electrical faults troubleshooting
- Collaboration with manufacturing teams
- Shop math
- Lifts and hoists
- General management
- Delivery driving
- Quality assurance within food and beverage industry
- Microsoft Word
- Building automation systems
- System testing
- Troubleshooting hydraulic systems
- Chilled water HVAC systems
- Defect resolution root cause analysis
- Safety hazards
- Facilities maintenance
- Root cause analysis
- Electrical control system maintenance
- Computer literacy
- Property maintenance
- Equipment testing
- Electronic meters
- Construction painting
- Minor electrical repair
- Electrical work
- Boiler repair
- Industrial automation
- Manufacturing budget management
- Productivity software
- Mechanical knowledge
- Maintenance activity documentation
- B2B business model
- Adobe Acrobat
- Equipment service recordkeeping
- Fabrication
- Field service equipment repair
- Electronic systems troubleshooting
- Quality standards in production
- Schematics
- Implementing lean manufacturing processes
- Team leadership
- NFPA 70 compliance
- CMMS
- Electrical safety procedures
- Power tools
- Retail sales
- Managing facilities maintenance teams
- Task assignment
- Electrical relays
- Power transmission systems
- Purchasing
- Staff supervision
- Equipment troubleshooting
- Preventive maintenance
- Computer skills
- Production testing
- Estimate costs
- Ventilation system maintenance
- In-person customer service
- Stakeholder relationship building
- Organizational skills
- Project management in manufacturing
- Mechanical troubleshooting
- Ohmmeter
- Electrical diagnostics
- Corrugating machines
- Field engineering
- Manufacturing equipment maintenance
- Manufacturing plant facilities maintenance experience
- HVAC system repair
- Automotive diagnostic scan tool usage
- Quality control within food and beverage industry
- Facilities routine maintenance
- Defect analysis
- Industrial electrical equipment installation projects
- Material handling equipment maintenance
- Contract management in manufacturing
- Managing manufacturing teams
- B2B sales
- Microsoft Excel
- Technical troubleshooting support
- Electrical maintenance
- Failure analysis
- Production process auditing
- Outdoor work
- Electrical schematic reading and interpretation
- Manufacturing
- Corporate sales environment
- Routine inspections
- Computer operation
- Electrical equipment repair
- Conveyor systems
- Operational management
- Food production equipment troubleshooting
- Chiller
- Inspection tools
- Pneumatic systems
- Material handling equipment operation
- CAD design (engineering design task)
- Customer communication
- Desktop applications
- Spreadsheets
- Power transmission system maintenance
- Company vehicle operation
- Corrective maintenance operations
- 5S
- Customer relationship management
- Assembly
- Industrial equipment repair
- Food processing plant
- Statistics
- Industrial boilers
- Basic math
- Time management
- Leadership skills
- Effective communication
- Attention to detail
Certification
- FANUC Certified Robot Technician, 01/01/26, Present
- Securities Industry Essentials
- Six Sigma Certification
- Forklift Certification
- Non-CDL Class C Driver's License
- Hazmat Endorsement
- Master Electrician
- Airframe & Powerplant License
- Journeyman Electrician
- Electrical License
- HVAC Certification
- Certified Pool Operator
- Lean Six Sigma Certification
- Welding Certification
Languages
English
Timeline
Reliability Technician
Georgia-Pacific
01.2025 - Current
Maintenance Technician Electrical
ADM
06.2023 - 01.2025
Maintenance Technician
Pace Industries
09.2021 - 06.2023
Process Engineer
Kilgore Flares
06.2019 - 09.2021
Associate of Science - Engineering Systems Technology
Jackson State Community College
High School Diploma -
Adamsville Junior / Senior High School