Summary
Overview
Work History
Education
Skills
Timeline
Generic

Dan Lund

Provo,UT

Summary

Dedicated HVAC Tech and always willing to learn more and has a great understanding of system functions and mechanical diagnosis, great at communication and following through until task is complete and understands the exact specifications to make equipment run efficently.


Hardworking Framer with remarkable communication skills. Attentive, respectful and trustworthy. Possessing to complete difficult tasks and projects with speed, efficiency and safety. Punctual, experienced and trained in OSHA standards.



Overview

11
11
years of professional experience

Work History

Framer

Universal Contractors
07.2022 - 08.2023
  • Used nail guns, saws and grinders safely and without incident.
  • Accurately and safely installed wall, roof and floor structures according to blueprints, customer requests, and available inventories.
  • Installed frames and secured to walls and support structures.
  • Cut, measured and shaped wood after inspecting blueprints, build areas and work orders.
  • Walked walls and beams 10-70' balancing along surfaces while wearing tool bags and carrying a nail gun and skilsaw.
  • Used appropriate glues, adhesives and sealants for frames, correctly handling chemicals to minimize exposure.

Journeyman HVAC

Winter Mechanical
02.2023 - 07.2023
  • Understood and used proper tools and equipment to install and maintain HVAC systems.
  • Followed all safety procedures and guidelines to promote safety while working on el
  • Handled installation of electrical components by splicing, joining, and connecting wire.
  • Repaired light fixtures, controls, switches, relays, and circuit breaker panels based on detailed evaluations.
  • Optimized work readiness with organized tools and spaces.
  • Inspected electrical systems, equipment and components to identify hazards and defects.
  • Repaired systems, replaced malfunctioning parts and supported electrical installations.
  • Loaded and carried materials to facilitate transport at construction sites.
  • Followed industry regulations and local building codes.
  • Prepared and applied construction materials to build structures or fill gaps.
  • Utilized equipment to break old forms and structures.
  • Trained and supervised team of construction workers.
  • Supervised installation of electrical and plumbing systems.
  • Built custom homes to develop local areas.

Journeyman Sheet Metal Worker

Utah Local 312 Sheet Metal Worker
02.2022 - 04.2023
  • Observed safety practices and procedures to maintain safe and clean working environment.
  • Used rulers, squares and scribes to measure and mark dimensions and reference lines on materials.
  • Performed quality finishes by trimming and deburring to create smooth surfaces and joints of assembled parts.
  • Fastened joints and seams together to assemble components into sheet metal products.
  • Skilled at working independently and collaboratively in a team environment.
  • Self-motivated, with a strong sense of personal responsibility.
  • Proven ability to learn quickly and adapt to new situations.
  • Worked well in a team setting, providing support and guidance.
  • Worked effectively in fast-paced environments.
  • Demonstrated respect, friendliness and willingness to help wherever needed.
  • Excellent communication skills, both verbal and written.
  • Passionate about learning and committed to continual improvement.
  • Proved successful working within tight deadlines and a fast-paced environment.

Lead Installer, Service Tech, Crew Lead

Gillette HVAC
02.2020 - 04.2022
  • Loaded and unloaded building materials used for construction.
  • Performed routine preventive maintenance on air circulation, plumbing, and electrical building systems.
  • Removed damaged tile, brick and mortar as part of project demolition.
  • Developed and executed layout and installation of electrical wiring and fixtures based on job terms and city regulations.
  • Trained employees in time management and proper ways to complete job duties.
  • Communicated effectively with upper management, team members, and customers to keep everyone informed.
  • Discussed daily work requirements with crew and assigned skills-based tasks to enable completion of work.
  • Monitored team members to verify work quality and address concerns.
  • Instructed crew members in safe work practices and methods to reduce work-related injuries.
  • Diagnosed and troubleshot problems, repairing, and restoring machines to peak performance.
  • Installed new equipment and explained operation and routine maintenance protocols to customers.
  • Settled crew member disputes by addressing problems quickly and providing successful mediation.
  • Responded to customer inquiries quickly and professionally to increase satisfaction.
  • Inspected equipment to diagnose operational issues.
  • Explained diagnostic findings to customers and outlined repair or service options.
  • Maintained accurate records of service calls and customer interactions for training and accountability purposes.
  • Evaluated systems according to predetermined checklist and noted issues.
  • Pitched in to help on short-staffed job site and to meet looming project deadlines.
  • Replaced faulty components on computer systems and performed preventive maintenance to secure smooth operations.

Lead Installer

Southern Comfort Hvac Heating & Cooling
04.2019 - 05.2020
  • Loaded and unloaded building materials used for construction.
  • Performed routine preventive maintenance on air circulation, plumbing, and electrical building systems.
  • Removed damaged tile, brick and mortar as part of project demolition.
  • Developed and executed layout and installation of electrical wiring and fixtures based on job terms and city regulations.
  • Operated tools, equipment, and machinery according to safety standards.
  • Communicated quickly and accurately with supervisors about problematic sites, missed installations or other issues.
  • Installed complete systems at new residential and business construction sites.
  • Calculated materials and time needed for each job.
  • Developed and maintained professional relationships with customers and vendors to promote loyalty and referrals.
  • Assisted with system design and layout to optimize installations and continuous performance.
  • Completed troubleshooting of malfunctions and diagnosed issues.
  • Laid out materials and system components to prepare for installation.
  • Used appropriate PPE to reduce risks when working with electrical and communications systems.
  • Worked with diverse types of weather and ground conditions.
  • Tested systems, noting issues and completing preventive maintenance.
  • Followed established procedures for inspection of belts, drives and motors, performing needed maintenance.
  • Diagnosed and repaired problems with electrical and mechanical systems.
  • Inspected, evaluated and calibrated electrical and mechanical systems and components.

Framer

Universal Contractors
01.2016 - 04.2019
  • Used nail guns, saws and grinders safely and without incident.
  • Accurately and safely installed wall, roof and floor structures according to blueprints, customer requests, and available inventories.
  • Installed frames and secured to walls and support structures.
  • Cut, measured and shaped wood after inspecting blueprints, build areas and work orders.
  • Cut and joined wood, using precise measurements and proper techniques to create frames of different sizes
  • Used appropriate glues, adhesives and sealants for frames, correctly handling chemicals to minimize exposure.
  • Planned and executed work with proper tools and materials to maximize efficiency.
  • Shaped or cut materials to specified measurements using hand tools, machines and power saws.
  • Effectively used nails, screws, pneumatic nailing systems, concrete anchors, powder-actuated fasteners and framing connectors.
  • Read and interpreted blueprints and construction documents to determine project directives.
  • Operated forklifts and other heavy equipment.
  • Safely operated electric cordless and hammer drills and cutting torches.

Team Lead

Jones Mechanical Air Conditioning & Heating
01.2014 - 08.2016
  • Trained new team members by relaying information on company procedures and safety requirements.
  • Coached team members in techniques necessary to complete job tasks.
  • Worked different stations to provide optimal coverage and meet production goals.
  • Evaluated employee skills and knowledge regularly, training, and mentoring individuals with lagging skills.
  • Monitored team performance and provided constructive feedback to increase productivity and maintain quality standards.
  • Built strong relationships with customers through positive attitude and attentive response.
  • Supervised team members to confirm compliance with set procedures and quality requirements.
  • Established open and professional relationships with team members to achieve quick resolutions for various issues.
  • Worked with team to identify areas of improvement and devised solutions based on findings.
  • Promoted high standerds through personal example to help each member understand expected behavious and standards.
  • Conducted training and mentored team members to promote productivity, accuracy, and commitment to friendly service.
  • Mentored and guided employees to foster proper completion of assigned duties.
  • Monitored time and attendance, enforcing compliance with company procedures relating to absenteeism.
  • Assisted in recruitment of new team members, hiring highest qualified to build team of top performers.

Laborer

Universal Contractors Llc
03.2012 - 01.2014
  • Worked alongside team to accomplish work goals according to schedule.
  • Understood and followed verbal and written instructions to complete work correctly.
  • Maintained organized and clean work areas at all times on job sites.
  • Loaded, unloaded, and moved material to and from storage and production areas.
  • Organized materials, tools, and equipment to supply team members.
  • Prepared job sites by removing debris and setting up materials and tools.
  • Utilized construction tools and machinery to effectively complete job site projects.
  • Followed proper equipment operation and maintenance procedures to keep equipment in good working condition.
  • Used measuring tools such as gauges and tape measure to identify conforming parts during production.
  • Used variety of hand and power tools to complete tasks.
  • Loaded and unloaded materials onto trucks and trailers.
  • Followed instructions and safety protocols to prevent accidents and injuries.
  • Cleaned and maintained tools, equipment and worksites.
  • Moved and cleared debris from work sites to dispose of in designated areas.
  • Loaded and unloaded materials and equipment onto and off construction sites.
  • Managed safe and efficient use of tools and equipment on construction sites.
  • Provided labor support to carpenters, masons and other skilled trades.
  • Operated forklifts and boom lifts to complete various tasks.
  • Helped with erecting scaffolding and ladders.
  • Installed drywall, siding and other structural components.

Education

EPA CORE,TYPE 2 Certified - Refrigetration

EPA
Spanish Fork, UT
04.2021

No Degree - RMGA (gas Certification)

Johnstone
West Valley City, UT
03.2021

GED -

BYU
Provo, UT
08.2010

Skills

  • Stud Framing
  • Carpentry and Woodworking
  • Lumber Preparation
  • Work Crew Coordination
  • Physical Agility
  • Knowledge of Machines
  • Electrical Wiring
  • Calculations and Measurements
  • Minor Plumbing and Welding
  • Reading Schematics
  • Wood Framing
  • Subflooring Installation
  • Structural Knowledge
  • Team lead
  • Furnace and Condenser Diagnosis
  • Furnace and Condenser Install
  • Electrical Understanding
  • Service and Customer relations
  • Safety Procedures as to combustables and Proper Ventilation

Timeline

Journeyman HVAC

Winter Mechanical
02.2023 - 07.2023

Framer

Universal Contractors
07.2022 - 08.2023

Journeyman Sheet Metal Worker

Utah Local 312 Sheet Metal Worker
02.2022 - 04.2023

Lead Installer, Service Tech, Crew Lead

Gillette HVAC
02.2020 - 04.2022

Lead Installer

Southern Comfort Hvac Heating & Cooling
04.2019 - 05.2020

Framer

Universal Contractors
01.2016 - 04.2019

Team Lead

Jones Mechanical Air Conditioning & Heating
01.2014 - 08.2016

Laborer

Universal Contractors Llc
03.2012 - 01.2014

EPA CORE,TYPE 2 Certified - Refrigetration

EPA

No Degree - RMGA (gas Certification)

Johnstone

GED -

BYU

Similar Profiles

CREATE PROFILE
Dan Lund