Reliable highway maintenance worker with hands-on experience supporting safe roadway travel through lane closures, traffic control, snow and debris removal, and routine road repairs. Brings strong equipment operation skills, close teamwork with crews and dispatch, and steady attention to safety on active job sites.
Work History
Highway Maintenance Worker 2
2 Years 3 Months
WSDOT | Buckley, Washington | 08.2024 - Current
Cleared snow, ice and other debris from highways to maintain road safety.
Removed snow, ice, and debris from WSDOT roadways and ramps.
Maintained WSDOT highways, shoulders, and roadside areas to ensure safe travel.
Repaired guard rails damaged by collisions or extreme weather conditions.
Repaired pavement, guardrails, and drainage features along state routes.
Performed routine maintenance tasks, such as patching potholes and repairing guardrails.
Operated plows, dump trucks, loaders, and hand tools during maintenance work.
Inspected roads, signs, and structures for hazards and needed repairs.
Inspected roadways and bridges for signs of deterioration or damage.
Removed debris from roadways to enhance safety for motorists. from roadsides to ensure safe passage for motorists.
Set up temporary warning signs around construction zones to alert drivers of potential hazards.
Placed traffic control signs, cones, and barricades for lane closures.
Responded to roadway incidents and supported emergency traffic control.
Supported roadway projects and highway repairs by effectively managing traffic patterns.
Coordinated with WSDOT crews, dispatch, and travelers to provide timely updates on roadway conditions.
Prepared trucks with equipment and materials for daily maintenance operations. with supplies needed for daily maintenance operations.
Operated heavy equipment, including snow plows, graders, sweepers, and asphalt spreaders.
Operated heavy machinery with extreme care and caution, following specific employer guidelines for safety.
Cleaned catch basins regularly to keep stormwater runoff flowing properly.
Repaired roadway signs, fences, and other structures.
Repaired traffic signs damaged by weather or accidents.
Communicated with other workers regarding traffic flow patterns during construction activities.
Assisted in the installation of new highway features, such as guardrails and lighting fixtures.
Engaged in continuous learning about new techniques and materials for highway maintenance.
Followed state and federal regulations regarding highway maintenance and public safety.
Hauled and spread sand, gravel and clay to fill washouts and repair road shoulders.
Dismantled old structures that were no longer usable due to age or wear-and-tear.
Conducted surface treatments, including sealing and resealing, to extend the life of roadways.
Sealed cracks in pavement to prevent water infiltration and erosion.
Monitored traffic signals at intersections to make sure they are functioning properly.
Utilized GPS and other technology tools for precise location-based work and reporting.
Coordinated with team members to complete projects efficiently and within scheduled timelines.
Collaborated with engineers and planners on highway construction projects to provide maintenance insights.
Measured locations for installation of markers, utilizing tape, string or chalk.
Responded to emergency situations involving hazardous materials spills on roadways.
Collaborated with engineers and planners on highway construction projects to provide maintenance insights.
Hauled and spread sand, gravel and clay to fill washouts and repair road shoulders.
Measured locations for installation of markers, utilizing tape, string or chalk.
Equipment Operator
7 Months
Miles Resources | Puyallup, WA | 04.2021 - 11.2021
Used forklifts, loaders, excavators and other equipment to move materials around work sites and organized according to need.
Operated excavators, dozers, loaders, haul trucks, and rollers to complete safe and efficient work.
Trained in diverse pieces of equipment and useful attachments to handle team needs.
Communicated with ground team members and fellow operators to prevent safety hazards and keep materials moving.
Maximized equipment and personnel protection by proactively identifying and avoiding hazards like utility lines.
Graded earth and smoothed surfaces for project completion.
Maintained fully fueled and operational equipment to ensure project requirements were met and teams adhered to tight schedules.
Conducted thorough equipment inspections, repairs, and maintenance to extend the lifespan of each piece of machinery.
Operated range of heavy equipment on a regular basis with advanced skill.
Operated machining equipment safely with team of operators.
Performed thorough pre-shift and post-shift inspections and accurately completed equipment logs and reports.
Met project demands consistently through careful and consistent operation of heavy equipment.
Adhered to heavy equipment safety and operation protocols, resulting in minimal complaints or incidents.
Strictly adhered to company safety procedures, noticeably decreasing job site accidents.
Resolved most mechanical issues independently and worked with supervisors and senior personnel to resolve complicated problems.
Loaded and transported various materials around job sites to support project operations. such as dirt and rocks based on specific job needs.
Ripped out existing asphalt and concrete to prepare for site changes and new construction.
Avoided hazards such as hanging or buried utility lines when operating equipment.
Equipment Operator
6 Months
Pivetta Brothers Construction | Frederickson, WA | 08.2020 - 02.2021
Operated range of heavy equipment on a regular basis with advanced skill.
Used forklifts, loaders, excavators and other equipment to move materials around work sites and organized according to need.
Operated excavators, haul trucks, rollers, and loaders to complete safe and efficient work.
Trained in diverse pieces of equipment and useful attachments to handle team needs.
Maintained, cleaned, and inspected equipment after each job to ensure optimal performance and safety.
Performed thorough pre-shift and post-shift inspections and accurately completed equipment logs and reports.
Communicated with ground team members and fellow operators to prevent safety hazards and keep materials moving.
Consistently met project demands by operating heavy equipment with precision and care.
Adhered to heavy equipment safety and operation protocols, resulting in minimal complaints or incidents.
Strictly adhered to company safety procedures, noticeably decreasing job site accidents.
Maximized equipment and personnel protection by identifying and avoiding hazards such as utility lines.
Conducted thorough inspections, repairs, and maintenance on machinery to extend operational lifespan and reliability.
Resolved most mechanical issues independently and worked with supervisors and senior personnel to resolve complicated problems.
Loaded and moved materials such as dirt and rocks to meet project specifications.
Ripped out existing asphalt and concrete to prepare for site changes and new construction.
Avoided hazards such as hanging or buried utility lines when operating equipment.
Operated machining equipment safely with team of operators.
Equipment Operator
2 Years 11 Months
Fenix Earthworks | Buckley, WA | 09.2017 - 08.2020
Used forklifts, loaders, excavators and other equipment to move materials around work sites and organized according to need.
Operated excavators, loaders, dozers, dump trucks, rollers, grade rods, and other equipment to complete safe and efficient work.
Loaded and moved materials such as dirt and rocks based on specific job needs.
Ripped out existing asphalt and concrete to prepare for site changes and new construction.
Trained in diverse pieces of equipment and useful attachments to handle team needs.
Maintained, cleaned, and inspected equipment after each job to ensure optimal performance.
Performed thorough pre-shift and post-shift inspections and accurately completed equipment logs and reports.
Communicated with ground team members and fellow operators to prevent safety hazards and keep materials moving.
Strictly adhered to company safety procedures, noticeably decreasing job site accidents.
Maximized equipment and personnel protection by identifying and avoiding hazards such as utility lines.
Diagnosed and fixed mechanical issues independently to minimize downtime. independently and collaborated with supervisors to address complex problems.
Conducted thorough inspections, repairs, and maintenance actions to extend machinery lifespan.
Determined and marked locations of underground pipes and wires to plan optimal digging locations.
Avoided hazards such as hanging or buried utility lines when operating equipment.
Head Meat Cutter
11 Years 7 Months
Fred Meyer | Bonney Lake, WA | 01.2006 - 08.2017
Cut, trimmed and ground meats such as beef, pork and poultry to prepare for packaging and sale.
Cut meats to customer specifications and answered questions about specialty products.
Used boning knife, skewers and twine to shape, lace and tie roasts.
Verified proper inventory levels, product quality and freshness to prevent sale of spoiled products.
Performed meat inspections and checked temperature environment to maximize food safety.
Analyzed meat temperatures for safety and quality and monitored heat conditions for stability.
Conducted proper operations of tenderizers, injectors and smoking ovens.
Updated production procedures to streamline operations and reduce merchandise waste.
Education
Completion of Apprenticeship - Heavy Equipment Operating
Operating Engineers Training Center | Ellensburg, WA | 01-2019
Completion of Apprenticeship - Meat Cutting
Bates Technical College | Tacoma | 01-2012
High School Diploma
Collins High School | Buckley | 06-2007
No Degree
Enumclaw High School | Enumclaw
Skills
Excavation and Backfilling
Excavator Operation
Backhoe Operation
Loader Operation
Dump truck operation
Construction Tools Operation
Roadway Construction
Roadway maintenance
Road repairs
Roadway repair
Roadway safety
Roadway inspection
Roadway safety compliance
Traffic management
Traffic sign installation
Lane closures
Emergency response support
Accident Prevention
Accident Management
Jobsite Safety
Work zone safety
Safe Machinery Operation
Safe equipment handling
Equipment inspection
Preventive maintenance
Drainage system maintenance
Drainage maintenance
Erosion Control
Erosion prevention
Ditch grading
Pavement patching
Crack sealing
Pavement markings
Shoulder repairs
Guardrail installation
Bridge inspection
Street sweeping
Grading techniques
Landscaping Maintenance
Roadside cleanup
Physical labor
Team Communication
Team collaboration
Situational awareness
Adaptability
Stakeholder Coordination
GPS navigation
Weather treatments
First aid certification
Hand tool proficiency
Dump truck operation
Team collaboration
Weather treatments
Stakeholder Coordination
Accomplishments
WSDOT Safety Coin
Governor's Life Saving Award
Timeline
Highway Maintenance Worker 2
WSDOT
08.2024 - CurrentRead More
Equipment Operator
Miles Resources
04.2021 - 11.2021Read More
Equipment Operator
Pivetta Brothers Construction
08.2020 - 02.2021Read More
Equipment Operator
Fenix Earthworks
09.2017 - 08.2020Read More
Head Meat Cutter
Fred Meyer
01.2006 - 08.2017Read More
Operating Engineers Training Center
Completion of Apprenticeship from Heavy Equipment Operating
Highway Maintenance Worker 2 at Washington State Department Of TransportationHighway Maintenance Worker 2 at Washington State Department Of Transportation
Highway Maintenance Worker 2 at Washington State Department of TransportationHighway Maintenance Worker 2 at Washington State Department of Transportation