Summary
Overview
Work History
Education
Skills
Accomplishments
Certification
Languages
References
Timeline
Generic

Daniel Clements

Greybull,Wyoming

Summary

Dynamic Aviation Maintenance Technician with extensive experience at West Star Aviation, US Army aviation, excelling in troubleshooting and technical manual interpretation. Proven track record of enhancing operational readiness rates, showcasing strong problem-solving aptitude and effective team collaboration. Committed to safety and precision, ensuring compliance with rigorous maintenance standards. Not afraid to think outside the box, and always willing to learn new aspects of the job. I take constructive criticism well and looks to further strengthen the team in any way possible.

Overview

19
19
years of professional experience
1
1
Certification

Work History

Aviation Maintenance Technician II

West Star Aviation
Grand Junction, C
01.2020 - 10.2024
  • Utilized electronic testing equipment to troubleshoot fuel, ignition and emissions control systems.
  • Performed maintenance services such as lubricating components.
  • Reported issues, malfunctions, unusual wear, or damage to appropriate personnel.
  • Assisted in the development of maintenance procedures, policies, and programs for aircraft operations.
  • Updated maintenance and repair logs according to services performed and submitted reports to supervisors for review.
  • Performed detailed inspections of aircraft systems and components to identify any potential issues or defects.
  • Disassembled units and inspected parts for wear with micrometers, calipers and gauges.
  • Requested aviation parts and supplies before scheduled repairs to meet inventory needs.
  • Replaced worn components such as bearings, seals, O-rings, and filters according to manufacturer specifications.
  • Serviced and maintained aircraft systems, flushing crankcases, cleaning screens and greasing moving parts.
  • Diagnosed malfunctions utilizing technical publications and experience gained from previous similar problems encountered during maintenance activities.
  • Ordered necessary parts for repair jobs from local vendors or manufacturers.
  • Maintained aircraft environmental systems, oxygen systems, fire extinguishing systems and utility systems.
  • Utilized hand and power tools to detect and repair aircraft malfunctions and damages.
  • Inspected and verified dimensions and clearances of parts to verify conformance to factory specifications.
  • Executed corrosion control and inspection duties with minimal supervision.
  • Recommended replacement, repair or modification of aircraft equipment based on inspection.
  • Assisted in training new personnel on aviation maintenance techniques.
  • Adhered strictly to safety rules while working around hazardous materials such as fuel and lubricants.
  • Completed required paperwork related to maintenance activities accurately and timely.
  • Participated in engine run-ups after major overhauls or installations were completed.
  • Ensured compliance with all applicable airworthiness regulations and standards.
  • Removed aircraft parts such as engines, pumps and landing gear.
  • Reviewed work orders and discussed with supervisors.
  • Provided assistance to other technicians in diagnosing complex malfunctions or performing difficult tasks.
  • Assembled and installed mechanical, hydraulic and structural components and accessories using appropriate tools.
  • 2 1/2 years, and 4,000+ hours of maintenance on Dassault Falcon models, 20, 50, 900B/C/LX/DX/EX/EX EASY, 2000 EX/LX/LX/EX EASy and Falcon 7X.
  • 2+ Years, and 3,000+ hours of working on Cessna Citation Jet models: CJ models, Mustang, 550B,560,560 Encore, 680, 680A 750, and 750+.
  • Also worked on multiple Hawkers, King Air, Learjet, Challenger and Global aircraft as well.

Server/Trainer/Expert

Applebee's Neighborhood Grill & Bar
Pueblo & Grand Junction, CO
11.2017 - 11.2022
  • Encouraged trainees to provide constructive feedback on training sessions, using insights to refine and improve training methods.
  • Verified guest satisfaction with meals and suggested additional items to increase restaurant sales.
  • Educated waiters on menu, memorization strategies and how to convey information clearly.
  • Provided exceptional service to high volume of daily customers.
  • Conducted comprehensive training sessions for new servers, focusing on menu knowledge, customer service skills, and POS system operation.
  • Obtained and organized manuals, guides and visual materials for development and training purposes.
  • Evaluated training materials prepared by instructors and offered actionable suggestions for improvement.
  • Welcomed guests with personable attitude and brought beverage orders while reviewing menu options.
  • Facilitated team-building activities to foster a positive and collaborative work environment among new hires.
  • Provided one-on-one support to ensure successful completion of training objectives.
  • Maintained a positive learning environment by addressing any questions or concerns raised by participants promptly.
  • Performed continuous reviews of wait staff and provided feedback directly to team members as well as managers.
  • Prepared salads, appetizers, and garnishes to assist kitchen staff.
  • Monitored and evaluated server performance during training period to ensure adherence to restaurant standards and protocols.
  • Collaborated with management to identify training needs and develop strategies for continuous improvement.

Bartender, Cook, Manager

Viktorio's Pizzaria and Bar
Colorado City, CO
02.2013 - 01.2018
  • Recommended food and drinks to patrons based on preference, pairings and special promotions.
  • Resolved customer complaints in a professional manner.
  • Adhered to state regulations regarding serving alcohol responsibly.
  • Managed accurate bar tabs and processed cash and credit card transactions.
  • Prepared cocktails from bar recipes and served wine, draft and bottled beer.
  • Cleansed glasses with sanitizing solution after each use.
  • Stocked ice bins and coolers as needed throughout shift.
  • Greeted customers and provided excellent customer service.
  • Monitored customer drink levels and suggested additional drink purchases at appropriate times to boost sales.
  • Monitored guests' alcohol consumption levels to prevent over-intoxication or underage drinking.
  • Trained new bartenders on drink preparation and upselling techniques.
  • Maintained safety and sanitation standards with firm enforcement amongst bar staff.
  • Worked in close collaboration with team members to ensure customers received high-quality service.

Gutter Install Crew Lead

Peoples Choice Roofing
Pueblo, CO
04.2017 - 11.2017
  • Allocated material and labor resources to promote on-time and under-budget project completion.
  • Operated equipment with strong focus on safety and ground communication.
  • Communicated effectively with co-workers regarding progress of jobs.
  • Performed demanding physical work over extended periods and modeled positive attitude.
  • Performed basic maintenance tasks on tools used during installation process.
  • Ensured that all safety protocols were followed while working on ladders and roofs.
  • Repaired damaged or leaking gutters when necessary.
  • Removed existing gutters from buildings as needed.
  • Set up ladders or scaffolding to safely access roof.
  • Measured and cut gutter sections to fit individual roof lines.
  • Cut roofing paper to size and nailed and stapled paper to roof in overlapping strips to form base for roofing materials.
  • Installed downspouts, elbows, end caps, and other gutter components in accordance with industry standards.
  • Actively sought out ways to improve efficiency and productivity on the job site.
  • Cleaned or prepared construction sites to eliminate hazards.
  • Gained independent working skills and guided and mentored less experienced team members.
  • Cleaned up job sites after completion of work.
  • Repaired and maintained surface materials to make building exteriors weatherproof and waterproof.
  • Attached hangers to fascia boards to secure gutters in place.
  • Demonstrated best safety practices working at heights and lifting various objects.
  • Caulked seams between gutter sections for a watertight seal.
  • Troubleshot issues arising during the installation process quickly and efficiently.
  • Transported materials and tools to job sites utilizing company vehicle safely and efficiently.

Ironworker Apprentice

Industrial Construction Managers
Pueblo, CO
07.2016 - 04.2017
  • Aligned and connected structural components to create safe, long-lasting results.
  • Signaled crane operators in safe and accurate lifting and placing of reinforcing iron members and moved rebars manually into specific positions.
  • Installed metal decking on floors or roofs of buildings.
  • Worked closely with structural ironworkers, ornamental Ironworkers, riggers and machinery movers, enabling clear and safe cross-functional operations.
  • Helped to erect steel columns, beams, and girders.
  • Studied and understood blueprints and specifications before beginning work on projects.
  • Laid out reference points for fabrication activities on structural steel members.
  • Removed and replaced existing grating and structural steel with appropriate materials.
  • Repaired damaged metalwork onsite with welding techniques.
  • Cleaned work areas, equipment, tools, materials, and supplies using brooms, rags, scrapers, brushes, shovels, or portable vacuums.
  • Performed layout and set up blocking in mod footprint.
  • Cut and bent reinforcing bars with hand tools such as shears and benders.
  • Set up and operated welding machines to weld components together.
  • Loaded and unloaded trucks carrying material used in construction projects.
  • Attended courses for apprenticeship, i.e. Welding, OSHA, forklift, jib lift, scissor lift, and telehandler.
  • Assisted Journeyman and General Foremans in all projects, and above listed bullets.

UH-60 Blackhawk Repair

US Army
Ft. Carson, CO
10.2005 - 10.2015
  • Utilized advanced technical skills and expertise to troubleshoot complex problems and implement solutions.
  • Updated and maintained databases with current information.
  • Worked with cross-functional teams to achieve goals.
  • Operated equipment and machinery according to safety guidelines.
  • Worked as a mechanic on the company's phase team from 2006 to 2007 in Mannheim, Germany.
  • Provided support and guidance to colleagues to maintain a collaborative work environment.
  • Maintained updated knowledge through continuing education and advanced training.
  • Inspected completed work to certify that maintenance adhered to standards and procedures.
  • I became a crew chief in 2007 and maintained flight status until 2013.
  • Graduated from the Primary Leadership Development Course in 2007.
  • Graduated from Air Crew Standardization Instructor at Ft. Rucker passing with a 98%, with the course having an 85% attrition rate.
  • Multiple deployments to combat operations in support of Operation Iraqi Freedom and Operation Enduring Freedom, as a crew chief and as my company's Standardization Instructor. Conducting pre-flight inspections, daily inspections, 40-hour inspections, and 120-hour inspections.
  • Became C. Co 2-227th AVN REGT's maintenance NCO during deployment to Afghanistan. Brought the operational readiness rate of 15 aircraft from 76% to 96% within a 2-month period, and maintained 96% for the rest of the deployment.
  • Served in various leadership positions from, squad leader to platoon sergeant.
  • I became the 4th Combat Aviation Brigade's non-rated crew member instructor, maintaining records for 150 non-rated crew members, and also writing the SOPs for all non-rated crew members.
  • First phase team leader in the 4th CAB to lead the first five phase inspections on the brigade's UH-60 aircraft, and completed them ahead of the scheduled time.
  • Moved to the Quality Control section of the ASB, the equivalent of a MRO. Worked as an inspector for the last 2 1/2 years of service. Also, I was the battalion's Army Oil Analysis Programs NCO.

Education

Standardization Instructor - Non-rated Crew Member Flight Instructor

USAASE
Fort Rucker, AL
10-2010

NCO Professional Development - Enlisted Leadership

7th JMTC NCO Academy
Grafenwoher, Germany
02-2008

15T- UH-60 Helicopter Repair - Aviation

US Army Aviation School
Fort Eustis, VA
02-2006

GED -

Rye High School
Rye, CO
05-2003

Some College (No Degree) - General Studies

Colorado Mesa University
Grand Junction, CO

Skills

  • Aircraft maintenance
  • Technical manual interpretation
  • Troubleshooting systems
  • Electronic testing equipment
  • Parts ordering
  • Scheduled inspections
  • Safety-oriented
  • Team collaboration
  • Attention to detail
  • Goal setting
  • Military maintenance requirements
  • Interpreting technical documentation
  • Blueprint and schematic reading
  • Communication and coordination
  • Troubleshooting and repair
  • Problem-solving aptitude

Accomplishments

  • Decorated Veteran of multiple deployments in support of the Global War on Terrorism.
  • Sikorsky Rescue awards, and multiple flight hour awards, and a safety award.

Certification

  • Drivers License
  • Airframe and Powerplant licenses

Languages

English
Full Professional
German
Limited

References

References available upon request.

Timeline

Aviation Maintenance Technician II

West Star Aviation
01.2020 - 10.2024

Server/Trainer/Expert

Applebee's Neighborhood Grill & Bar
11.2017 - 11.2022

Gutter Install Crew Lead

Peoples Choice Roofing
04.2017 - 11.2017

Ironworker Apprentice

Industrial Construction Managers
07.2016 - 04.2017

Bartender, Cook, Manager

Viktorio's Pizzaria and Bar
02.2013 - 01.2018

UH-60 Blackhawk Repair

US Army
10.2005 - 10.2015

Standardization Instructor - Non-rated Crew Member Flight Instructor

USAASE

NCO Professional Development - Enlisted Leadership

7th JMTC NCO Academy

15T- UH-60 Helicopter Repair - Aviation

US Army Aviation School

GED -

Rye High School

Some College (No Degree) - General Studies

Colorado Mesa University

Similar Profiles

CREATE PROFILE
Daniel Clements