Deemytri Marin
Edinburg,TX
Summary
Efficient Apprentice Electrician well-versed in state and local codes and regulations. Strong knowledge base acquired over 4 years of apprenticeship experience. Trained in Underground and Conduit work with exceptional work ethic and drive. Hard working, always present and punctual with many capabilities and the willingness to learn any and all tasks.
Overview
8
8
years of professional experience
Work History
Electrician
BHI
Snyder, TX
06.2024 - 11.2024
- Assisted in the successful installation of BESS energy systems, ensuring proper alignment and secure connections.
- Installed and wired electrical transformers, service panels, and circuit breakers on Tesla BESS systems.
- Installed, maintained, repaired, and tested equipment for electricity generation and utilization.
- Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
- Maintained a safe working environment by adhering to industry standards and regulations during installations and repairs.
Electrical Apprentice / QAQC Technician
Gridworks
Pecos, TX
04.2023 - 01.2024
- Assisted in the successful installation of Sungrow BESS energy systems, ensuring proper alignment and secure connections.
- Improved product quality by conducting thorough inspections and identifying defects in a timely manner.
- Evaluated supplier materials against established specifications, ensuring adherence to high-quality standards throughout the supply chain.
- Reduced the risk of electrical hazards by meticulously inspecting wiring installations, equipment, and appliances for adherence to codes and regulations.
- Improved client satisfaction with timely completion of inspection reports, providing valuable feedback on necessary corrective actions.
Electrician Apprentice
Nemmer Electric
Waco, TX
01.2023 - 04.2023
- Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
- Pulled wire through conduits and through holes in walls and floors.
- Read and interpreted drawings to provide wiring layouts for new installations
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement or repair.
- Checked and performed electrical wiring through conduits and holes in walls and floors.
Electrician Apprentice
Primoris
Snyder, TX
10.2022 - 12.2022
- Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
- Pulled wire through conduits and through holes in walls and floors.
- Helped complete system installations, digging trenches and breaking up concrete.
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement or repair.
- Checked electrical installation for proper wiring, polarity, grounding and integrity of terminations.
Journeyman Electrician
E Light Electric
Brookesmith, TX
07.2022 - 09.2022
- Completed rough-in, termination and underground work.
- Repaired and installed new fixtures, wiring, circuits and motors.
- Operated tools according to prescribed safety practices.
- Interpreted blueprints, schematics and diagrams of project requirements and initiated appropriate electrical installations.
- Read and understood technical drawings, diagrams, flow charts and project documentation to make accurate decisions about electrical system installations and repairs for each assignment.
- Evaluated existing electrical systems for maintenance, repair and update requirements.
Solar Factory Specialist / Rover Driver
Terabase
06.2022 - 07.2022
- Read and interpreted blueprints and job plans, verified measurements and checked site conditions before installing any panels.
- Installed panels using hand and power tools.
- Configured PV systems based on site conditions and customers needs and expectations.
- Completed routine pre- and post-trip inspections to evaluate vehicles and assess maintenance needs.
- Achieved consistent safety targets by adjusting driving to different road and traffic conditions, balancing loads and avoiding dangerous driving actions.
- Unloaded and loaded items from conveyors, machines and conveyances.
- Monitored machinery to identify concerns, make corrections or report complex problems.
- Maintained machinery to prevent overloads and avoid malfunctions.
- Used equipment properly to avoid workplace hazards or injuries.
Electrical Apprentice
TMT Electric
04.2022 - 05.2022
- Connected wires to circuit breakers, transformers and other components.
- Installed, maintained and repaired electrical wiring, controls and lighting systems.
- Attached power cables to equipment such as electric range and motor.
- Inspected transformers and circuit breakers for malfunctions.
- Followed blueprints to install wiring before completion of walls, ceilings or floors.
- Tested circuit continuity to determine electrical compatibility and component safety.
- Spliced, joined and connected wire to fixtures and other electrical components.
- Handled installation of electrical components by splicing, joining and connecting wire.
Electrician Helper
TIC
09.2021 - 03.2022
- Tested electrical systems and continuity of circuits in electrical wiring, equipment and fixtures using various testing devices.
- Pulled wire through conduits and through trenches.
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement or repair.
- Read and interpreted drawings to provide wiring layouts for new installations
Electrical Apprentice
IEA
08.2021 - 09.2021
- Ran wires and set up support structures for panels.
- Read and interpreted blueprints and job plans, verified measurements and checked site conditions before installing any panels.
- Used drawings, schematics and instructions to properly install PV systems in accordance with codes and standards.
- Checked electrical installation for proper wiring, polarity, grounding and integrity of terminations.
Electrical Apprentice
BMI Electric
06.2021 - 07.2021
- Installed and wired electrical transformers, service panels and circuit breakers.
- Ran wires and set up support structures for panels.
- Read and interpreted blueprints and job plans, verified measurements and checked site conditions before installing any panels.
- Used drawings, schematics and instructions to properly install PV systems in accordance with codes and standards.
- Checked electrical installation for proper wiring, polarity, grounding and integrity of terminations.
- Configured PV systems based on site conditions and customers needs and expectations.
Unlicensed Journeyman Electrician
HCS Renewable
12.2020 - 06.2021
- Completed precise measurements using special tools.
- Evaluated components and final products against quality standards and manufacturing specifications.
- Monitored performance and generated reports detailing quality of product and defect rates.
- Helped uncover and fix production problems in order to reduce overall defect rates.
- Streamlined QA processes by working closely with development teams and staying abreast of changing product demands.
- Pulled wire through conduits and through holes in walls and floors.
- Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement or repair.
Wind Turbine Technician
Bianchi Electric
08.2020 - 10.2020
- Assisted with general site support, including establishing processes and procedures for newly created facilities.
- Diagnosed and fixed Fiber and Grounding issues causing turbines to shut down unexpectedly or fail to operate correctly.
- Conducted systematic processes for identifying root cause of wind turbine component failures.
- Performed troubleshooting procedures to assess causes of issues and deliver properly functioning turbines.
- Constructed wind systems generating electricity in accordance with drawings, specifications, codes and project requirements.
- Corrected issues with mechanical, electrical and hydraulic systems, enhancing performance and reducing recurrence of maintenance issues.
- Minimized risks and incidents by strictly adhering to regulations, safety rules and codes.
Wind Turbine Technician
Bianchi Electric
06.2020 - 08.2020
- Assisted with general site support, including establishing processes and procedures for newly created facilities.
- Diagnosed and fixed fiber and grounding issues causing turbines to shut down unexpectedly or fail to operate correctly.
- Constructed wind systems generating electricity in accordance with drawings, specifications, codes and project requirements.
- Performed troubleshooting procedures to assess causes of issues and deliver properly functioning turbines.
- Corrected issues with mechanical, electrical and hydraulic systems, enhancing performance and reducing recurrence of maintenance issues.
- Maintained excellent attendance record, consistently arriving to work on time.
Electrician's Apprentice
HCS Renewable
11.2019 - 05.2020
- Pulled wire through conduits and through holes in walls and floors.
- Worked under supervision of Journeyman Electrician to learn trade and develop electrical knowledge.
- Read and interpreted drawings to provide wiring layouts for new installations Inspected wiring to evaluate issues and identify short circuits.
- Transported equipment and workers between job sites using company vehicles.
- Assisted electrician in basic tasks such as handling tools and completing maintenance work orders.
- Installed over 55 blocks of DC components with accuracy and without accident.
Electrical Apprentice
Mortenson Inc
11.2018 - 07.2019
- Worked under supervision of journeyman to learn trade and develop electrical knowledge
- Moved equipment, supplies and tools to work locations to assist superiors in completing skilled work
- Boosted job efficiency and customer satisfaction by maintaining organized and clean job sites
- Adhered to work site safety protocols and reported potential hazards
- Reviewed electrical schematics and plans and followed according to specifications
- Inspected machine parts for conformance to product specifications
- Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces
- Used schematic diagrams to plan work Performed basic machine set up
- Worked on both dead and energized lines
- Repaired wiring, plumbing, equipment, and machinery
- Calibrated system settings and arranged orientation for maximum solar access and optimal durability
- Supported technicians in equipment maintenance and repair.
Electrical Apprentice
Meltec Inc
07.2018 - 11.2018
- Dug trenches, backfilled holes and compacted earth to prepare for new construction
- Added or removed wire to shorten or lengthen lines, using various types of splices, connectors and clamps
- Performed maintenance and reconductoring work in safe and efficient manner
- Read blueprints and schematics to correctly place equipment
- Put in place systems consistently surpassing code and safety standards
- Tested system wiring layouts, grounds and terminations to finalize installations
- Conducted visual inspections and physical tests on previously installed modules and systems to identify faults
- Elegantly and skillfully connected system wiring and components to achieve both aesthetic and operational targets
- Examined blueprints, technical documentation and customer facilities to determine appropriate locations for installations Inventoried supplies and materials for installations and repairs, documented changes and requested new inventory to meet expected demand
- Unpacked and assembled all new merchandise using variety of power tools
- Pulled wire through conduits and through holes in walls and floors
- Used hand and power tools and diagnostic equipment to complete various aspects of jobs.
Electrician Helper
Edinburg School District
06.2017 - 07.2018
- Mounted equipment to walls, concealed wires, installed audio and programmed remote controls
- Handled calibration of audio and visual equipment for employees and set up devices for optimal performance
- Adhered to and kept team in line with established safety regulations and protocols when working on ladders and operating power tools
- Providing important protection for personnel and students
- Responded to service requests during and after business hours
- Planned layouts and ran cable into buildings and through walls, attics and crawl spaces
- Helped complete system installations
- Processed over 100+ support requests received over the year for technical assistance on wide range of issues related to hardware and technology.
Auto Detailer
VALCO
11.2016 - 06.2017
- Applied dyes and reconditioning chemicals to vinyl tops of vehicles to restore color and condition
- Applied revitalizers and preservation agents to vinyl or leather surfaces and treated fabrics with spot-and stain-resistant chemicals to preserve and protect interior components
- Mixed cleaning solutions, abrasive compositions and other compounds to clean interior and exterior of vehicle
- Applied wax to exterior of vehicles and removed it, buffing to brilliant shine
- Used steam cleaning equipment to remove dirt from engine and engine compartment Interacted face-to-face with customers to understand vehicle detailing needs and ensure quality satisfaction
- Cleaned engine and engine compartment with steam cleaning equipment and various cleaning agents to remove grease and grime
- Used cleaning, protective and restorative agents to maintain and enhance appearance of vehicles.
Education
High School Diploma - undefined
Robert Vela High School
Edinburg, TXSkills
- Proficiency at reading blueprints
- Terminations
- Electrical power line installation
- Capable of heavy lifting
- Fast Learner
- Wire knowledge
- Able to adapt to any environment
- Effective at multi-tasking
- Safety procedures knowledge
- Dependable and reliable
- Good communication skills
- Valid Texas driver's license
- Tubing and conduit
- Transformer removal
- Schematics reading
- Electrical schematics
- Audio, Fast Learner
- Basic Cable Reading
- Protocols
- Calibration, Repairs
- Good communication skills, Schematics
- Hardware, Schematic diagrams
- Dependable, Technical
- Electrician, Troubleshooting
- Wiring
- Machinery
- Multi-tasking
- Personnel
- Power tools
- Processes
- Quality
Timeline
Electrician
BHI
06.2024 - 11.2024
Electrical Apprentice / QAQC Technician
Gridworks
04.2023 - 01.2024
Electrician Apprentice
Nemmer Electric
01.2023 - 04.2023
Electrician Apprentice
Primoris
10.2022 - 12.2022
Journeyman Electrician
E Light Electric
07.2022 - 09.2022
Solar Factory Specialist / Rover Driver
Terabase
06.2022 - 07.2022
Electrical Apprentice
TMT Electric
04.2022 - 05.2022
Electrician Helper
TIC
09.2021 - 03.2022
Electrical Apprentice
IEA
08.2021 - 09.2021
Electrical Apprentice
BMI Electric
06.2021 - 07.2021
Unlicensed Journeyman Electrician
HCS Renewable
12.2020 - 06.2021
Wind Turbine Technician
Bianchi Electric
08.2020 - 10.2020
Wind Turbine Technician
Bianchi Electric
06.2020 - 08.2020
Electrician's Apprentice
HCS Renewable
11.2019 - 05.2020
Electrical Apprentice
Mortenson Inc
11.2018 - 07.2019
Electrical Apprentice
Meltec Inc
07.2018 - 11.2018
Electrician Helper
Edinburg School District
06.2017 - 07.2018
Auto Detailer
VALCO
11.2016 - 06.2017
High School Diploma - undefined
Robert Vela High School