Dellon Fontenelle

Lawn care, detailing, wood work, etc

• Inspector- 08/23-11/2023
• With 6yrs of inspection. Repairing water leaks on mains, service line, knowing how to make the right calls as far replacement of pipe or and clamps. Always having contractors or city workers having to excavate or by hand dig to get down to the main. all the gas lines and cables should be marked making sure that these PVC pipes whether it’s a 8 inch 10“ 12“ 16 inch 18 inch or 20 inch pipe gets repaired correctly making sure everybody got the right size couplings. on fire hydrants it goes the same as repairing on a main take measurements before and after pic the pictures making sure they get out to the right people and email form stay in contact with everybody so we’re all on the same page when it comes to Repairs and understanding about other healthwise as far as anybody on dialysis When water needs to be shut down and not shut down what’s the timeframe there’s a lot that goes in depth of doing it understanding Watermain repairs knowing if it’s public or private
• How to write out pay sheets and double checking every measurement and picture and fitting are all correct. Ensure before you sing your name that everthing is correct

Inspected pipeline systems for compliance with safety regulations and company standards.

• Monitored pipeline operations to ensure proper pressure, flow rates, and other conditions.
• Conducted inspections of pipelines for corrosion, leaks, or other defects.
• Reported any irregularities or defects found during inspections to the appropriate personnel.

• Drove company vehicles to and from customer locations to perform field maintenance.
• Serviced and repaired designated equipment to meet company standards and specifications.
• Verified system functionality by testing equipment and connections, identifying and correcting problems.
• Met and exceeded customer demands through responsive and accurate on-site maintenance.
• Applied company safety policies consistently when performing daily tasks.
• Utilized handheld device to update work order status.
• Used logging tools to collect data from field, supporting engineer analysis.

• Field inspections pvc to cast iron
• Operated hand and power tools to complete repairs.
• Maintained clear and safe workspace areas to meet OSHA standards.
• Installed new systems, replacement parts and components to maintain proper operation.
• Completed basic carpentry tasks and installed shelves, hooks and closet rods to meet customer needs.
• Conducted performance and safety inspections on equipment and machinery to maintain operational baseline.
• Changed HVAC filters and cleaned condensation drains to perform preventive maintenance on HVAC systems.
• Diagnosed problems with mechanical and electrical systems and equipment using advanced troubleshooting abilities.
• Scheduled preventive maintenance programs to keep equipment in good working condition.
• Inspected grounds and buildings to identify, minimize and correct hazardous property conditions or liability concerns.
• Installed, repaired and maintained equipment.
• Repaired and replaced worn and defective parts.

• Operated pressure pumps according to manufacturer specifications and safety rules.
• Repair engines and engine run kits
• install emergency hooks
• repaint emergency lifeline boats
• electrical troubleshooting
• Evaluated tool drawing designs by measuring drawing dimensions and comparing with original specifications.
• Devised, fabricated or assembled new or modified mechanical components for products.
• Monitored, inspected or tested mechanical equipment.
• Prepared equipment inspection schedules, work plans or other records.

• Performed physically demanding work, including lifting, carrying and moving heavy objects.
• Followed EPA and OSHA regulations to maintain safety of water and personnel.
• Used forklifts, pumping equipment and air compressors frequently.
• Maintained correct temperature, levels and pressures on process systems and equipment.
• Recorded operating data on daily work sheets from laboratory analysis and flow metering equipment.
• Trained new operators and implemented new division operator training program to improve retention rates and increase production.
• Read automatic gauges at proper intervals to determine flow rate of gas.
• Documented and recorded critical metrics in database related to pressure, temperature, level and flow data to maintain and update accurate repair logs.
• Operated trains and switchmen

• Inspected completed work for professional flush and finish.
• Make cuts on pipes that was not passing inspection
• inspection on welds of pipes
• operator overhead crane to hoist up pipes
• Cut-and measure out pipes
• Improved operations by working with team members and customers to find workable solutions.

• Set up rigging equipment for use in production sets and stages.
• Securely attach loads to rigging equipment using clamps, shackles, and other fasteners.
• Inspect rigging equipment for any visible damage or defects prior to use.
• Adjust cable tension as needed during the course of a performance or production.
• Position stage scenery, lighting fixtures, props, and other objects with precision accuracy using hoists, pulleys, winches, lifts, and cranes.
• Determine appropriate load-bearing capacity of various types of rigging systems and components.
• Troubleshoot problems with rigging systems during performances or productions.