Summary
Overview
Work History
Education
Skills
General Skills
Timeline
Generic
Derek Valkovic

Derek Valkovic

QA/QC Electrical Inspector & Commissioning Test Engineer
DesMoines,IA

Summary

Experienced electrical and mechanical professional with extensive hands-on experience in QA/QC inspections, field commissioning, electrical testing, and welding in commercial, industrial, and mission-critical settings. I excel at coordinating with contractors and vendors, troubleshooting complex electrical systems, and meticulously reviewing field documentation to ensure that every detail meets code and project specifications. Known for being reliable, detail-oriented, and hands-on, I bring a strong work ethic and a team-first approach to every project.

Overview

9
9
years of professional experience
4033
4033
years of post-secondary education

Work History

Electrical Test Engineer

CAI Mission Critical
Des Moines, IA
05.2024 - Current
  • Coordinating with multiple vendors to ensure daily tasks are completed.
  • Performing QA/QC tests and procedures on electrical equipment including medium & low voltage oil and coil transformers, medium voltage switchgear, UPS systems, lighting panels, control panels, power panels, and other field devices.
  • Working through construction and commissioning roadblocks to keep the project moving and on schedule with contract deadlines.
  • Installing and troubleshooting PQMs (Power Quality Monitoring) on electrical equipment.
  • Setting up temporary construction Wi-Fi servers.
  • Installing and troubleshooting load banks as laid out in the load bank plan to meet proper KW testing requirements.
  • Operating electrical equipment such as MSBs, PDUs, UDSs, TCPs, UPSs, AHUs, and multiple generators.
  • Reviewing equipment specs and submittals from the client to confirm proper installation and control set points for desired equipment.
  • Submitting and revising RFIs with both electrical and general contractors.
  • Following Microsoft Data Center test scripts for equipment setup, QA/QC inspections, electrical pre-functional testing, functional load testing, pre-IST, final IST, and final turnover.
  • Installing and operating MTOC systems for client-required testing.
  • Using Power Quality Monitoring System software to monitor waveform quality, THD, voltage, frequency, REM cycles, active/reactive power, and current levels.
  • Communicating with clients, vendors, and contractors to work through issues and stay on schedule.
  • Reviewing and organizing documents submitted by contractors and vendors—BOLs, delivery docs, wire pull schedules, continuity reports, MEGG reports, torque logs, NETA grounding, EMOPs, and IR scans.
  • Keeping files organized and accessible for the team and all parties on site.
  • Reviewing cable schedules, panel schedules, and blueprints to verify builds match design.
  • Checking arc flash labels, nameplates, and cable labels for accuracy.
  • Deploying software updates for Power Quality Monitoring Systems.
  • Working in a team environment and stepping in to support leadership when needed.

QA/QC Electrical Inspector

EPI
12.2022 - 05.2024
  • Utilized specialized software tools to generate and meticulously document inspection reports.
  • Collaborated closely with various trades to ensure stringent adherence to safety protocols and quality control standards throughout each project phase.
  • Conducted comprehensive inspections of electrical installations on industrial sites to verify system integrity.
  • Executed insulation resistance tests (Megger), ground fault tests, and rotation tests to validate equipment performance and safety.
  • Inspected emergency systems including generators, UPS systems, and lighting to ensure compliance with equipment design standards.
  • Coordinated effectively with onsite contractors to troubleshoot and resolve field issues.
  • Researched torque specifications, client specifications and manufacturer installation instructions to guarantee equipment installed by design
  • Managed detailed documentation for both material and equipment inspections, ensuring all records were accurate and accessible.
  • Oversaw inspection schedules and coordinated site visits to maintain project timelines.
  • Identified instances of non-compliant work and provided actionable recommendations for corrective measures.
  • Employed Excel to systematically track testing data and compile comprehensive reports.
  • Operated power tools, interpreted electrical and mechanical schematics, and adhered rigorously to OSHA/LOTO standards.

Electrician

Saulsbury Industries
09.2022 - 12.2022
  • Installed and terminated multiple pressure transmitters in accordance with precise technical specifications and manufacturer guidelines.
  • Installed and terminated thermal transmitters to ensure accurate temperature monitoring and system reliability.
  • Installed and terminated both isolated and non-isolated valves, guaranteeing optimal flow control and system integration.
  • Installed rigid conduit to provide secure protection for electrical wiring and to comply with industry standards.
  • Installed cable trays, ensuring systematic cable management and supporting system organization.
  • Pulled multiple conductor wires with meticulous attention to detail to meet safety and design requirements.
  • Terminated medium and low voltage systems, ensuring safety, efficiency, and long-term reliability.
  • Installed Variable Frequency Drives (VFDs) to optimize motor performance and enhance energy efficiency.
  • Installed Programmable Logic Controllers (PLCs) for advanced process automation and control.
  • Installed power outputs to ensure robust electrical performance and system stability.
  • Worked from ladders, scaffolds and lifts to install, maintain, or repair electrical wiring equipment and lighting fixtures in ceilings, on roofs and on towers.
  • Used testing instruments such as ohmmeters, voltmeters, ammeters, and multimeters.
  • Inspected electrical systems, equipment and components to identify hazards, defects, and repair requirements.
  • Planned layout and installation of electrical wiring, equipment, and fixtures based on specifications and applicable code.
  • Improved electrical system safety by conducting thorough inspections and identifying potential hazards.
  • Inspected worksites and installations to verify compliance with state safety codes.
  • Stored and maintained power tools and equipment for each job.
  • Read and interpreted electrical, mechanical, and architectural drawings and electrical code specifications for wiring layouts.
  • Enhanced quality control by inspecting condition of equipment and tools.
  • Mentored apprentice electricians in proper installation techniques, safety protocols, and troubleshooting methods to enhance their skill sets.
  • Ensured project success by meticulously planning and executing electrical installations.

Electrician

Bax Electrical Solutions
06.2018 - 09.2022
  • Installed various types of lights in residential, commercial, and industrial environments.
  • Pulled and terminated CAT-5, CAT-6 cables.
  • Terminated cabling in communication server rooms.
  • Terminated energized and non-energized 120V, 240V, and 480V panels in commercial and industrial environments.
  • Demonstrated knowledge of stress cone make-ups.
  • Installed 1/2"-4" PVC conduit.
  • Installed 1/2"-4" EMT conduit.
  • Installed 1/2"-4" rigid conduit.
  • Troubleshot, repaired, and installed 120V, 240V, and 480V motors.
  • Installed and repaired various E-stop circuits.
  • Possess detailed knowledge of voltage drop.
  • Determined proper wire sizing for amp load and voltage drop requirements.
  • Installed 120V and 240V receptacles.
  • Installed multiple Variable Frequency Drives (VFDs).
  • Replaced PLC input and output cards.
  • Installed and repaired various types of transformers.
  • Tested various sized fuses, checked compatibility and safety of newly installed electrical systems, and conducted inspections to confirm functionality.
  • Demonstrated termination experience in commercial and industrial environments.
  • Installed 240V and 480V services in residential and commercial settings.
  • Installed 120V, 240V, and 480V heaters.
  • Troubleshot thermometers, switches, and buttons.
  • Tested motors for insulation deterioration and coil damage.
  • Exhibited journeyman-level proficiency with hand and power tools.
  • Completed Job Safety Assessment sheets, SDS documentation, and permits required to commence and complete jobs.
  • Installed GFCI breakers.
  • Installed a 1000V main breaker.
  • Troubleshot and repaired 120V, 240V, and 480V CTs.
  • Installed and troubleshot Marina pedestals.
  • Experienced with core drilling in concrete.
  • Proficient in reading blueprints in industrial and commercial environments.
  • Installed fusible and non-fusible disconnects.
  • Installed gutters.
  • Installed 480V and 240V transfer switches.
  • Demonstrated knowledge of Ohm's Law.
  • Applied Lock-Out Tag-Out (LOTO) procedures and conducted necessary safety assessments.

Electrical Apprentice

Pheonix Industrial
11.2016 - 01.2017
  • Assisted electricians with terminations inside and outside of MCCs, ensuring adherence to electrical standards
  • Ran conduit and EMT while efficiently pulling wire to support installation tasks
  • Terminated communication cabling using CAT-5 to maintain reliable network connectivity
  • Terminated fiber optic cables to enable high-speed data transmission
  • Installed and terminated solar panels to optimize energy generation and system performance
  • Gained proficiency in operating various power tools such as drills, saws, crimpers, and wire strippers for efficient completion of electrical tasks.
  • Optimized workspace organization, maintaining a clean and orderly work area that promoted safety and productivity.

Education

Professional Welding Certificate - Structural & Pipe Welding

Tulsa Welding School

High School Diploma -

Southwestern High School

Skills

  • Project Coordination & Field Leadership

  • National & State Electrical Codes

  • QA/QC Inspections and Compliance

  • Cross-Team & Vendor Communication

  • Technical Documentation & Reporting

  • Blueprint & Schematic Interpretation

  • Electrical Testing & Troubleshooting

  • Safety Management & LOTO Procedures

  • Time Management & Scheduling

  • Software Proficiency & Data Management

  • Heavy Equipment Operation & Resource Management

  • Strong Verbal and Written Communication

General Skills

  • Electrical Testing & Troubleshooting.
  • (Megger, Ground Fault, Load Testing, PQM systems).
  • Medium & Low Voltage Equipment (Transformers, Switchgear, UPS, VFDs, Panels).
  • Power Quality Monitoring System Software (Waveform, THD, Frequency, Voltage, Current).
  • Control Circuitry, AC/DC Systems, LOTO Procedures.
  • Electrical Installation, Repair, and Panel Termination, Blueprint & Wiring Diagram Interpretation.
  • State & National Electrical Codes.
  • Welding Processes: GTAW, SMAW, MIG, Fluxcore, Structural & Pipe.
  • Power Tools & Hand Tools.
  • Heavy Equipment Operation (Excavator, Trencher, Skid Steer, Forklift, Scissor Lift, Jenny Boom).
  • Overhead Cranes, Load Banks, MTOCs.
  • Daily Task Coordination & Field Leadership.
  • Cross-Team & Vendor Communication.
  • QA/QC Inspections & Compliance Reviews, RFI Submittals & Revisions.
  • Field Documentation: Torque Logs, MEGG Reports, BOLs, Wire Pull Schedules, NETA Reports, IR Scans.
  • Schedule & Milestone Tracking.
  • Site Issue Resolution & Problem Solving.
  • Microsoft Office 365 (Excel, Word, Outlook), Microsoft Teams, SharePoint, Compass, Procore.
  • Construction Wi-Fi Setup & Field Data Management Systems.

Timeline

Electrical Test Engineer

CAI Mission Critical
05.2024 - Current

QA/QC Electrical Inspector

EPI
12.2022 - 05.2024

Electrician

Saulsbury Industries
09.2022 - 12.2022

Electrician

Bax Electrical Solutions
06.2018 - 09.2022

Electrical Apprentice

Pheonix Industrial
11.2016 - 01.2017

Professional Welding Certificate - Structural & Pipe Welding

Tulsa Welding School

High School Diploma -

Southwestern High School

Similar Profiles

CREATE PROFILE
Derek ValkovicQA/QC Electrical Inspector & Commissioning Test Engineer