Diander Williams
Hampton,VA
Summary
- Reliable and organized professional with experience in the manufacturing industry. Proven track record of meeting production goals, adhering to safety regulations, and maintaining quality standards. Skilled in interpreting blueprints, operating machinery, and interpreting instructions. Excellent problem-solving and communication skills.
- Built and tested assemblies utilizing hand tools, power tools, fixtures, templates, drawings, and blueprints.
- Interpreted blueprints, drawings and specifications.
- Observed established assembly processes to improve efficiency.
- Successfully assembled and installed components, equipment, wiring, and piping systems to meet production standards.
- Managed the installation of new machines for production runs according to customer specific.
- Read print drawings to determine dimensions, design, and materials for construction.
- Assisted in training new assemblers on assembly techniques and processes.
- Met production goals by efficiently managing time while working on the assembly line.
- Updated assembly documentation to reflect current processes.Read tape measure, protractor and other length and angle-measuring devices.
Overview
16
16
years of professional experience
Work History
Assembler 3
Global Technical Systems
Virginia Beach
12.2023 - Current
- Build, test & install CAT5/5e/6, fiber, coax, shielded wires, and solder splice
- Assemble electro-mechanical assemblies, electrical enclosures, cables & wire harnesses using a variety of tools including, but not limited to crimpers, wire strippers, soldering irons, and multimeters in accordance with the technical data package
- Troubleshoot and/or test wiring, subassembly & other electronic equipment
- Read, comprehend, & interpret drawings, wire lists, diagrams, blueprints, specifications, work orders and reports
- Perform point to point wiring & equipment installs for commercial and ruggedized enclosures while employing proper cable grooming techniques
- Mentor & train others in essential job functions, company processes & policies.
- Collaborated with engineers and technicians to resolve line issues and suggest line improvements.
- Inspected parts for defects during each step of the assembly process to ensure quality control standards were met.
- Followed detailed verbal or written instructions and visual aids to perform assembly work.
Molding Setup Technician
Argon Medical Devices
Wheeling
06.2023 - 11.2023
- Identify and verify job orders to be setup for machine operators
- Set up catheter and needle hub molding machines for machine operators
- Set up core pins; install different types of index tables, cutting, loading, flaring and crimping station
- Identify different types of resin, purge and install resin chambers
- Verify programs, set parameters such as temperature, injection pressure and cooling time
- Use various tools such as socket wrenches, T wrenches, inside diameter checkers and also use different measuring tools
- Read blueprints, solid works, quality control and mold safety test(s).
- Utilized problem solving skills to diagnose malfunctions quickly and accurately.
- Reviewed instruction manuals for accuracy prior to installation operations.
- Assembled and adjusted various machinery components to ensure proper operation.
- Communicated effectively with co-workers regarding machine performance issues.
- Utilized blueprints and schematics to accurately assemble products.
- Calibrated machine parts using precision instruments as required.
Electromechanical Technician
JR Automation
Nashville
11.2022 - 05.2023
- Installed electrical and electronic parts and hardware in housings and assemblies, used soldering equipment, and hand tools.
- Verified part dimensions and clearances to ensure conformance to specifications, using precision measuring instruments.
- Created documentation for installation processes that included schematics, diagrams, flow charts, assembly drawings.
- Installed and programmed computer hardware and machine and instrumentation software in microprocessor-based systems.
- Selected electromechanical equipment, materials, components, or systems to meet functional specifications.
- Read blueprints, schematics, diagrams, or technical orders to determine methods and sequences of assembly.
- Maintained detailed records of all repairs performed in accordance with company policies and procedures.
- Installed, configured, tested, calibrated, operated and maintained various electromechanical systems.
- Assembled new electromechanical components according to blueprints and specifications.
- Used test instruments such as oscilloscopes, electronic voltmeters, and bridges.
- Prepared written documentation of electromechanical test results.
- Inspected electrical control panels for accuracy and functionality prior to installation.
- Utilized technical skills to troubleshoot and diagnose malfunctions in complex electrical systems.
- Worked with coworkers to complete tasks.
- Demonstrated ability to manage multiple tasks while remaining adaptable and flexible.
- Participated in ongoing training to enhance own job skills and knowledge.
- Collaborated with departmental leaders to establish organizational goals, strategic plans and objectives.
Lead Manufacturing Technician
Mide Technology
Woburn
06.2015 - 11.2022
- Implemented lean manufacturing principles to reduce waste and increase productivity.
- Adhered to all applicable regulations, policies and procedures for health, safety and environmental compliance.
- Collaborated with leads, managers, and co-workers to meet production schedules.
- Provided advice and training to other technicians.
- Prepared production documents, such as standard operating procedures, manufacturing batch records, inventory reports and productivity reports.
- Operated production equipment using current work instructions and station manuals.
- Oversaw and inspected production processes.
- Installed and calibrated new equipment in line with specifications.
- Assembled, tested and troubleshot mechanical components of products to ensure quality standards were met.
- Calibrated and adjusted equipment to provide quality production, using tools such as calipers, micrometers, height gauges, protractors and ring gauges.
- Implemented Lean Manufacturing principles such as 5S methodology to improve efficiency of processes.
- Developed manufactured infrastructure to integrate and deploy new manufacturing processes.
- Informed supervisor of situations detrimental to production, quality, or safety goals.
- Collaborated with departmental leaders to establish organizational goals, strategic plans and objectives.
- Managed and coordinated multiple projects while ensuring timely completion.
- Established KPIs for tracking progress towards objectives set out by upper management.
- Performed calibrations on a wide variety of equipment, including electrical and temperature devices, in accordance with prescribed standards.
- Ensured timely delivery of calibrated items through efficient scheduling of workloads based upon departmental needs.
- Diagnosed faults in electronic components using logic analyzers, signal generators, spectrum analyzers, as necessary.
- Calibrated devices by comparing measurements of pressure, temperature, humidity and other environmental conditions to known standards.
- Analyzed customer requirements and recommended appropriate measurement techniques for specific applications.
- Analyzed test data to identify defects and determined calibration requirements.
- Disassembled and reassembled equipment for inspection.
- Read blueprints, schematics, diagrams, or technical orders.
- Worked with small devices to load fixtures and process equipment.
- Inspected parts for proper insertion and placement.
- Inspected parts for defects during each step of the assembly process to ensure quality control standards were met.
Test technician/ Assembler
Olympus Scientific Solutions
Waltham
08.2014 - 05.2015
- Ensured that all safety protocols were followed while performing tests in laboratory environment.
- Maintained accurate records of all tests conducted and reported any discrepancies promptly.
- Recorded inspection and test data, such as weights, temperatures, grades, and moisture content and quantities inspected and graded.
- Classified and sorted products according to sizes, weights, colors and other specifications.
- Fabricated and installed connected components, parts, finished products and instruments for testing and operational purposes.
- Monitored machines that automatically measure, sort and inspect products.
- Documented all findings from testing activities including measurements taken during process validation.
- Cleaned, maintained, calibrated, or repaired measuring instruments or test equipment, such as dial indicators, fixed gauges, or height gauges.
- Verified conformance to specifications, using measuring instruments, such as rulers, calipers, gauges, and micrometers.
- Read dials or meters to verify equipment function.
- Notified supervisors and other personnel of production problems.
- Collected and selected samples for testing and for use as models.
- Discarded and rejected products, materials, and equipment not meeting specifications.
- Analyzed data from multiple sources to evaluate the effectiveness of existing systems and processes.
- Monitored the accuracy of test results by conducting repeatability checks as needed.
- Troubleshot minor problems and reported larger technical issues.
- Worked with coworkers to complete tasks.
E/M Assembler
Axcelis Technology
Beverly
02.2012 - 08.2014
- Read print drawings to determine dimensions, design, and materials for construction.
- Ran test cycles and conducted quality audits to maintain accuracy and quality.
- Followed detailed verbal or written instructions and visual aids to perform assembly work.
- Inspected parts for defects during each step of the assembly process to ensure quality control standards were met.
- Selected, aligned and secured holding fixtures, cutting tools and attachments on machines.
- Interpreted blueprints, drawings and specifications.
- Measured workpieces to determine accuracy of machine operation with rulers and templates.
- Performed mechanical assembly operations with accuracy in a timely manner.
- Followed strict safety guidelines while working with hazardous materials or operating heavy machinery.
- Inspected parts for proper insertion and placement.
- Successfully assembled and installed components, equipment, wiring, and piping systems to meet production standards.
Production Technician
TechDevice
Waltham
07.2010 - 01.2012
- Machine Operator- Setup Molding machine to produce hub/tube catheter, balloon attachments
- Operated Spot welder machine-Single/multiple welds, 180 degrees on various components
- Worked in a clean and controlled environment according to standard operating procedures
- Cleaned after the product was finished according to standard operating procedures
- Completed paperwork properly after counting and checking products
- Assembled coils by stuffing, cutting to exact length according documentation.
- Monitored and investigated yield, cycle time and quality issues on various machines and equipment.
- Inspected finished products for defects or discrepancies before they were released from the factory floor.
- Generated documentation for process set-up, maintenance troubleshooting, and operation instructions.
- Prepared production documents, such as standard operating procedures, manufacturing batch records, inventory reports and productivity reports.
- Monitored and troubleshot production processes to make necessary adjustments.
- Studied time, motion, methods, or speed involved in maintenance, production, or other operations to establish standard production rate or improve efficiency.
- Implemented Lean Manufacturing principles such as 5S, Kaizen and Kanban into daily operations.
- Successfully operated production machines to produce quality products in a timely manner.
- Read worker logs, product processing sheets, or specification sheets to verify that records adhere to quality assurance specifications.
Education
Graduate Certificate -
Essex North Shore Agricultural & Tech. School
Danvers, MA01-2023
Diploma - Refrigeration, Heating, Ventilation & Air Conditioning
Kaplan Career Institute
Charlestown, MA, US01-2010
General Education Diploma - GED
North Shore Community College
Lynn, MA01-2003
Bachelor of Science - Operations Management
Southern New Hamphire University
Manchester07-2030
Skills
- Assembly and production
- Machine Operation
- Skilled in final assembly processes
- Manufacturing
- Safety Management
- Quality Assurance
- OSHA
- Precision measurement
- Hardware Installation
- Accuracy
- Electrical Wiring
- Qualified in blueprint interpretation
- Equipment Operation
- HVAC system knowledge
- Component installations
- Quality Assurance Controls
- ISO 9000 trained
- Teamwork and Collaboration
- Multitasking
- Attention to Detail
- Adaptability and Flexibility
- Problem-Solving
- Analytical Thinking
- Issue Resolution
- Excellent Communication
- Task Prioritization
- Maintenance and Light Repair
- Professionalism
- Goal Setting
- Electrical Assembly
- Measurement and Calibration
- Inventory Management
- Cycle Counts
- Overhead Crane Operation
- Shipment Receiving and Processing
Timeline
Assembler 3
Global Technical Systems
12.2023 - Current
Molding Setup Technician
Argon Medical Devices
06.2023 - 11.2023
Electromechanical Technician
JR Automation
11.2022 - 05.2023
Lead Manufacturing Technician
Mide Technology
06.2015 - 11.2022
Test technician/ Assembler
Olympus Scientific Solutions
08.2014 - 05.2015
E/M Assembler
Axcelis Technology
02.2012 - 08.2014
Production Technician
TechDevice
07.2010 - 01.2012
Diploma - Refrigeration, Heating, Ventilation & Air Conditioning
Kaplan Career Institute
General Education Diploma - GED
North Shore Community College
Graduate Certificate -
Essex North Shore Agricultural & Tech. School
Bachelor of Science - Operations Management
Southern New Hamphire University