Dillon Norsworthy
Stonewall,LA
Summary
To obtain a career with a company I can grow with and be a valuable asset to. Organized and dependable candidate successful at managing multiple priorities with a positive attitude. Willingness to take on added responsibilities to meet team goals.
Overview
10
10
years of professional experience
Work History
E&I Technician
CertainTeed
12.2023 - Current
- Improved equipment reliability by conducting thorough inspections, identifying issues, and performing necessary repairs on electrical and instrumentation systems.
- Enhanced safety measures by designing, installing, and maintaining electrical control panels and safety devices for various industrial processes.
- Optimized plant efficiency with the installation, calibration, and troubleshooting of process control instruments such as pressure transmitters, temperature sensors, and flow meters.
- Reduced downtime through proactive preventive maintenance programs for electrical systems and instrumentation equipment.
- Collaborated with engineering teams to develop effective solutions for complex technical problems in industrial settings.
- Supported project completion by reading and interpreting schematics, wiring diagrams, technical manuals, and specifications to ensure accurate installations of E&I components.
- Increased cost savings by recommending energy-efficient alternatives when upgrading or replacing outdated instrumentation equipment.
- Provided prompt emergency response to address unexpected failures in E&I equipment, minimizing production losses.
- Conducted comprehensive testing procedures using multimeters, oscilloscopes, calibrators, and other diagnostic tools to verify proper functioning of E&I components.
- Assisted in the development of detailed maintenance schedules for plant-wide E&I assets to optimize productivity while reducing costs associated with unplanned downtime.
- Contributed to seamless startup operations by assisting in the commissioning of new equipment installations during facility expansions or upgrades.
- Maintained a safe working environment by adhering to strict safety protocols and participating in regular safety meetings/training sessions related to the E&I field.
- Coordinated with vendors to source high-quality replacement parts and equipment, ensuring timely repairs and reducing lead times for critical components.
- Minimized risk of electrical hazards by conducting comprehensive grounding tests and implementing corrective measures as needed.
- Demonstrated strong problem-solving abilities by troubleshooting complex issues related to PLC programming, HMI interfaces, SCADA systems, and other industrial control systems.
- Supported other technicians and engineers in assembly, disassembly, cleaning, testing and troubleshooting.
- Installed electrical conduit and wiring for power, controls, and lighting.
- Replaced faulty wiring, switches and circuit breakers to reduce fire risks, boost service capacity and increase versatility.
- Assisted with emergency and scheduled shutdowns while performing regular electrical duties.
Field Superintendent
Deep South Welding
06.2022 - 12.2023
- Coordinate multiple work crews and jobs
- Ensure job requirements, safety standards, and deadlines are met
- File, sort, and review all invoices and documents
- Service, maintain, and troubleshoot all company equipment
- Design, develop, and implement new safety standards
- Work around drilling rigs, pipelines, and high-pressure facilities
- Heavy equipment operation
- Gas line rig ups
- Flare line rig ups
- Rig up various pumps and hoses
- OBM (oil-based mud) transfer line and containment rig up
- Work closely with gas companies and company men
- Perform various tasks around drilling rigs and live wells
- Rig up well cages.
- Set and managed schedules to give proper coverage to required areas and meet customer service demands.
- Performed daily inspections, charted readings, documented equipment downtime and oversaw maintenance for equipment.
- Implemented and maintained high standards of quality in all areas.
Motor Hand
Precision Drilling
06.2021 - 06.2022
- Maintain Drilling rig and equipment
- Rebuild pumps
- Replace and rebuild relief valves
- Change out hydraulic hoses and valves
- Operate various equipment on the rig
- Replace belts and bearings
- Operate pressure manifolds
- Change out filters and other preventive maintenance
- Fill out all necessary paperwork for work and safety
- Torque and test flange fittings
- Change gaskets and O-rings as necessary
- Torque drill pipe and other drilling tools
- Run wires and plugs
- Test electrical equipment using a muti-meter.
- Inspected and tested equipment to locate damage or worn parts.
- Skilled at working independently and collaboratively in a team environment.
- Self-motivated, with a strong sense of personal responsibility.
- Proven ability to learn quickly and adapt to new situations.
- Worked effectively in fast-paced environments.
- Excellent communication skills, both verbal and written.
Industrial Maintenance Technician
International Paper
11.2020 - 06.2021
- Troubleshoot, Maintain, and repair various equipment
- Welding and fabrication
- Troubleshoot PLC and controls
- Test, install, and replace three-phase motors
- Install and service belts and pulleys
- Repair, maintain, and troubleshoot air compressors
- Operate clamp truck and PITs
- Service and maintain hydraulic pumps and hoses
- Interpret blueprints and schematic drawings
- Wire up panels, lights, and other electrical equipment
- Maintain and replace bearings
- Handle all wastewater and treatment protocols
- Move rolls of various paper around the facility
- Maintain all pneumatic equipment
- Rebuild pumps
- Supervise contractors to ensure all safety, work, and deadline requirements are met.
- Adhered to safety policies, procedures and regulatory criteria to maximize preventive controls.
- Diagnosed, repaired and replaced faulty electrical, electronic and mechanical components to maintain plant safety.
- Installed and repaired electrical and mechanical systems, equipment and machinery to maintain proper functionality.
- Inspected and tested electrical equipment, diagnosing malfunctioning apparatus.
- Performed routine preventive maintenance activities and retained copy of equipment programs as backups.
- Dismantled electrical machinery to replace faulty switches and electrical and mechanical system elements.
- Troubleshot programs and maintained programmable logic controllers.
- Troubleshot equipment breakdowns and performed preventive maintenance.
- Followed work orders and specifications for machine and equipment replacement, repair, or maintenance.
- Performed electrical and mechanical repairs of production equipment to minimize downtime.
Industrial Maintenance Technician
Sabre Industries
04.2020 - 11.2020
- Troubleshoot, Maintain, and repair various equipment
- Welding and fabrication
- Troubleshoot PLCs and controls
- Test and install AC motors
- Repair, change, and service belt and pully systems
- Repair, maintain, and troubleshoot air compressors
- Operate cranes, forklifts and man-lifts
- Rebuild hydraulic valves and pumps
- Perform preventive maintenance on hydraulic equipment
- Repair and rebuild electric wire feeders and welding machines
- Interpret blueprints and schematic drawings
- Pull, cut, and strip wire
- Wire up panels and other electrical equipment
- Report to any call-outs or maintenance emergencies
- Follow all safety and PPE protocols
- All other maintenance responsibilities
- Supervise contractors and work being done inside the facility.
- Adhered to safety policies, procedures and regulatory criteria to maximize preventive controls.
- Diagnosed, repaired and replaced faulty electrical, electronic and mechanical components to maintain plant safety.
- Inspected and tested electrical equipment, diagnosing malfunctioning apparatus.
- Monitored and documented work performance in maintenance logs in compliance with company guidelines.
- Completed partial or full dismantling of equipment to quickly repair or replace defective components and restore functionality.
- Conducted routine maintenance and inspections to identify and address mechanical issues.
- Cleaned, lubricated and calibrated machinery components to maintain peak operating performance.
- Conducted preventative maintenance on heavy equipment, such as lubrication, checking fluids and replacing worn parts.
Motor Hand
Savanna Energy Services
06.2019 - 03.2020
- Maintain and service Hydraulic Pressuring Unit (HPU)
- Maintain, troubleshoot, and service all diesel engines (Preventive Maintenance)
- Operate Catwalk to move pipe up to rig floor
- Maintain, service, and repair various tools and Equipment on location
- Operate loader, forklift, and manlifts
- Assist with pump rebuilds and maintenance
- Repair and Maintain Electrical integrity of the drilling rig
- Assist with major repairs on a rig like traction motors, service loops, etc
- Always watching for safety and practicing good safety habits
- Work anywhere from 12 to 18 hours a day
- Disassemble various equipment to inspect and clean
- Practice good housekeeping to maintain a clean and safe work environment
- Use various hand tools as required
- Connect cement lines and assist in setting cement head
- Safety leader on my crew
- Fill out all necessary paperwork for preventive maintenance and monthly inspections
- Install, change, and repair hydraulic hoses
- Install pressure and temperature gauges when needed
- Troubleshoot air controls and air compressors.
- Inspected and tested equipment to locate damage or worn parts.
- Monitored drilling operations and machines.
- Maintained compliance requirements, work instructions and program procedures to promote safety.
- Monitored employee safety and coached workers on safety standards and procedures to prevent injuries.
- Managed rig sub-contractors to maintain safe and efficient operations of rig equipment.
- Performed diagnostic and troubleshooting procedures to find and identify root causes of mechanical issues.
Floor hand
Cartel Drilling
09.2018 - 06.2019
- Makeup BHA (Bottom Hole Assembly)
- Operate tongs and the iron roughneck
- Trip in/Trip out of the well
- Assist in repairs around the drilling rig
- Operate equipment around the rig (Loader, Man lift, etc.)
- Assist in Nipple up
- Assist in cementing
- Assist in pump rebuilds
- Rig up and rig down
- Clean using a pressure washer and other supplies
- Use of various tools and equipment
- Use of hand tools
- Assist in walking/skidding the rig
- Grease the crown and other equipment.
- Maintained clean, organized, hazard-free work areas for optimized site safety.
- Carried out general manual labor activities to aid site productivity.
- Executed daily operations quickly and accurately, achieving productivity targets.
- Provided assistance in assembly and disassembly of drilling rig and equipment.
- Performed minor repairs on drilling equipment and tools to limit operational disruptions.
- Loaded, unloaded and stored supplies and materials in secure, orderly systems.
- Verified job safety analysis (JSA) and correctness of obtained permits prior to starting new jobs.
- Prepared drilling sites with correct equipment and materials for productive operations.
- Monitored shaker and mud tank operations.
- Operated down-hole tools safely and responsibly, limiting risk.
- Selected appropriate pumps, valves and associated equipment for productive drilling operations.
Gate Station Technician
Washington Gas
03.2016 - 09.2018
- Conduit and tubing installation and bending
- Test, repair, and perform preventative maintenance within the gate station
- Commission/decommission natural gas piping with up to 1250 psi present
- Test pipelines for leak and proper functioning
- Complete maintenance records, service reports, and other required documents
- Calibrate differential pressure (DP) transmitters, pressure, and temperature transmitters using: a heart communicator, Ametek, Heise, resistance temperature detector (RTD), and multimeter
- Test, calibrate, and replace natural gas meters (orifice, ultrasonic, turbine, rotary, diaphragm)
- Test set point and lock up and repairs on pressure regulators (627,1301, fisher EZR, Mooneys, etc.)
- Perform preventative maintenance on control valves
- Manage natural gas Odorant and YZ systems
- Use Infor 10 for logging time and routine communication purposes
- Governor valve inspection and greasing (ball and plug valves)
- Assist in the testing and calibration of a gas chromatograph (GC)
- Perform preventative maintenance on line heaters
- Perform preventative maintenance and calibration on LEL detectors
- Testing and replacement of process reliefs
- Troubleshooting and maintenance of programmable logic computers (PLC) and supervisory control and data acquisition (SCADA) systems
- Active member of Washington Gas Supply and Engineering safety committee
- Maintain electrical integrity of all gate stations
- Worked directly with electrical engineers in the designing and installation of programmable logic computers and SCADA systems
- Supervise contractors to ensure that work and safety requirements are met.
- Cleaned and adjusted instruments.
- Removed damaged instruments and repaired components.
- Conducted troubleshooting procedures and root cause analysis to determine causes of problems.
- Identified issues by testing and troubleshooting instruments, components and assemblies using voltmeters, circuit testers and oscilloscopes.
- Determined layouts to install wiring in automated systems based on drawings and code specifications.
- Passionate about learning and committed to continual improvement.
- Followed correct reporting procedures for safety concerns and incidents.
- Kept electrical, gas-powered and hydraulic machinery in great condition by troubleshooting and correcting malfunctions.
- Used correct lockout and tag-out procedures when conducting maintenance on equipment.
- Organized routine inspections to detect faults and arranged quick corrective actions.
- Partnered with installer to troubleshoot and resolve instrumentation and electrical equipment and automation issues.
- Managed facets of instrumentation and electrical equipment and automation maintenance program to support company pipeline and facility operations.
Field Supervisor
Environmental Safety & Health
01.2015 - 03.2016
- Improved project efficiency by consistently monitoring work progress and providing timely feedback to team members.
- Enhanced team productivity with thorough training sessions on safety protocols and daily task management.
- Reduced project completion time by effectively delegating tasks and setting clear goals for the field team.
- Ensured quality control through meticulous inspections of job sites, identifying areas for improvement and implementing corrective actions.
- Improved workplace safety by conducting regular inspections and identifying potential hazards.
- Reduced accident rates through implementing effective training programs for employees.
- Enhanced overall safety culture by fostering open communication and encouraging employee involvement in safety initiatives.
- Investigated incidents and near-misses, identifying root causes and implementing corrective actions to prevent recurrence.
- Tested materiel and fluids for hazardous chemicals
- Spill prevention
- Offshore spill containment
Crew Foreman
Blackhawk Environmental
06.2014 - 01.2015
- Enhanced crew productivity by implementing efficient scheduling and task delegation methods.
- Streamlined project completion timelines through effective communication and coordination among team members.
- Reduced safety incidents by conducting thorough risk assessments and implementing appropriate safety measures.
- Ensured on-time project delivery by maintaining a proactive approach to problem-solving and resource allocation.
- Improved client satisfaction rates with consistent high-quality workmanship and attention to detail.
- Increased employee retention by fostering a positive work environment and providing opportunities for professional growth.
- Optimized resource utilization, effectively managing labor, equipment, and materials for maximum efficiency.
- Maintained excellent workplace safety standards through regular training sessions and adherence to industry guidelines.
- Leveraged strong interpersonal skills to resolve conflicts within the crew, promoting harmony and teamwork.
- Delivered exceptional results under tight deadlines by prioritizing tasks based on urgency and complexity.
- Coordinated with other trades on-site to ensure seamless workflow, minimizing delays or disruptions.
- Provided clear direction to crew members, setting goals, expectations, and performance benchmarks for each project phase.
- Generated detailed progress reports for management review, enabling informed decision-making regarding resources allocation and project adjustments.
Education
Technical Diploma - Instrumentation & Electrical Technology
Northwest Louisiana Technical College
Mansfield, LA12.2023
GED -
Youth Challenge Program Military Academy At Camp Beauregard
Pineville, LA06.2010
Skills
- Employee Relationships
- Contractor Management
- Daily Progress Reports
- Assignment Delegation
- Coaching Skills
- Schematic Diagrams
- Critical Thinking
- Meter Calibration
- Flow Meters
- Instrument Repairs
- Valve Repairs
- Supervisory Control and Data Acquisition (SCADA)
References
- Paul Hall, Washington Gas, Electrical Engineer, 703-966-0621
- Steven Sloop, Aethon, Company Man, 501-762-2302
- Joel Mitchell, Deep South Welding, Owner/Manager, 318-471-6029
Additional Training
- H2S Awareness
- Lock out tag out
- Defensive driving
- Fire watch
- Fire ext.
- Confined space-entrant-attendant-supervisor
- Work zone safety
- Flagger
- Heat stress
- Excavation safety awareness
- Respirator use and limitations
- 40-hour Hazwoper
- Industrial Safety Training Council Basic Plus
- Houston area Safety Council Basic Plus
- Association of Reciprocal Safety Council’s basic plus
- Continued education on measurement equipment
- Line heaters
- Regulators
- Odorization
- Rosemount Transmitters
- SCADA
- Calibration equipment
- Instrumentation & electrical classes
- Natural gas properties
- Participated in entry-level classes for gas chromatographs
Timeline
E&I Technician
CertainTeed
12.2023 - Current
Field Superintendent
Deep South Welding
06.2022 - 12.2023
Motor Hand
Precision Drilling
06.2021 - 06.2022
Industrial Maintenance Technician
International Paper
11.2020 - 06.2021
Industrial Maintenance Technician
Sabre Industries
04.2020 - 11.2020
Motor Hand
Savanna Energy Services
06.2019 - 03.2020
Floor hand
Cartel Drilling
09.2018 - 06.2019
Gate Station Technician
Washington Gas
03.2016 - 09.2018
Field Supervisor
Environmental Safety & Health
01.2015 - 03.2016
Crew Foreman
Blackhawk Environmental
06.2014 - 01.2015
Technical Diploma - Instrumentation & Electrical Technology
Northwest Louisiana Technical College
GED -
Youth Challenge Program Military Academy At Camp Beauregard