Dylan Pinon

• Acted as lead audio technician (A1) for corporate conferences, general sessions, and breakout room setups.
  
• Installed, routed, and managed complete audio systems including digital consoles, wireless mic racks, speaker systems, and signal distribution.
• Mixed live audio for keynote speakers, panels, and video playback, ensuring clarity and balance across voice and media.
• Set and adjusted gain structure, EQ, compression, and feedback suppression across multiple zones and room sizes.
• Coordinated frequency management and RF coordination for multiple wireless channels in dense environments.
• Provided leadership to A2 techs and stagehands; communicated with clients, producers, and stage managers for live event execution.
• Handled real-time troubleshooting and last-minute changes with minimal disruption during live presentations.

Knowledge and Skills:

• Proficient on digital consoles (e.g., Yamaha QL/CL, Allen & Heath, Midas, Behringer X32)
• Wireless microphone systems (Shure ULX-D, QLX-D, Axient) and IEMs
• Audio DSP (QSC, Biamp, BSS) and matrix routing

A2 Responsibilities

• Supported A1 and audio department with setup, testing, and operation of microphones, monitors, playback devices, and cabling for corporate events and live performances.
• Mic’d up keynote speakers, panelists, and talent using lavaliers, headsets, and handhelds with professional on-stage etiquette.
• Monitored wireless frequencies, battery levels, and signal integrity during showtime; handled quick-turn mic swaps and backstage troubleshooting.
• Set up stage monitors, DJ gear, instrument mics, and playback systems for musical guests and multimedia segments.
• Managed backstage audio logistics, including RF coordination support and talent cueing.
• Assisted with audio striking, labeling, equipment maintenance, and storage.

Knowledge and Skills:

• Hands-on experience with wireless systems (Shure, Sennheiser) and IEMs
• Comfort working backstage with talent and VIPs
• Basic understanding of gain structure, cabling, and mic placement
• Able to follow cues, respond to show flow, and support A1s under pressure
• Strong communication and problem-solving on fast-paced show sites

L2 Responsibilities

• Assisted the Lighting Lead (L1) and Lighting Designer in the setup, programming, operation, and breakdown of lighting systems for concerts, corporate events, theatrical productions, and trade shows.
• Installed lighting fixtures, dimmers, truss, and power distribution systems according to lighting plots and show specs.
• Addressed and patched fixtures using DMX and networking protocols (e.g., sACN, Art-Net).
• Focused and aimed lights under direction, ensuring accuracy for cueing and scene design.
• Provided real-time support during shows, helping troubleshoot issues with fixtures, cabling, and control systems.
• Assisted in programming cues and operating lighting consoles during rehearsals and smaller productions when needed.
• Ensured all work followed safety standards and rigging protocols, particularly when working at height or around power.

Skills:

• Working knowledge of lighting systems, power distro, and DMX control
• Familiarity with consoles like GrandMA, ETC, or Avolites (as an assistant/operator)
• Proficient in fixture addressing, patching, and basic programming.

General AV Responsibilities (GAV)

• Set up, operated, and maintained audio, video, and lighting equipment for live events, conferences, and large-scale productions.
• Installed and configured projection systems, LED walls, PA systems, and video switchers to meet event-specific needs.
• Provided on-site technical support during events, including live mixing, signal routing, and troubleshooting under pressure.
• Interfaced with clients, event managers, and production teams to ensure smooth execution and clear communication.
• Handled equipment load-in/load-out, system testing, and strike with attention to speed, safety, and organization.
• Maintained and repaired AV gear including cables, microphones, control surfaces, and lighting fixtures.
• Supported hybrid/virtual events with streaming setups and video conferencing systems like Zoom, Teams, and WebEx.

Knowledge and Skills:

• Audio consoles (analog/digital), wireless systems, microphones
• Video switchers, projectors, LED wall control, cameras
• Lighting systems (DMX control, moving lights, dimmers)
• Signal flow (HDMI, SDI, XLR, CAT5/6, fiber)
• Live troubleshooting and client-facing communication
• Familiar with Crestron, Extron, Blackmagic, QSC, Shure, Allen & Heath

General AV Responsibilities (GAV):

• Set up, operated, and maintained audio, video, and lighting equipment for live events, conferences, and large-scale productions.
• etc,

L1 Responsibilities

• Served as the lead technician responsible for managing all lighting aspects of live event productions including concerts, corporate events, theater shows, and trade shows.
• Interpreted lighting plots and technical documentation to plan and execute full lighting system builds, from power distribution to fixture layout.
• Led lighting crew during load-in, setup, focus, programming, operation, and strike of lighting systems.
• Programmed and operated lighting consoles (e.g., GrandMA, ETC, Avolites) for rehearsals, run-throughs, and live performances.
• Oversaw addressing and patching of intelligent, conventional, and LED fixtures using DMX, Art-Net, or sACN networks.
• Ensured all lighting operations complied with safety regulations, rigging protocols, and venue policies.
• Provided mentorship and direction to L2 technicians and stagehands.

Skills:

• Advanced knowledge of lighting design principles, fixture types, and beam control
• Proficiency in console programming and operation (GrandMA2/3, ETC EOS, Avolites, etc.)
• Expertise in DMX addressing, networking, and troubleshooting signal and power issues
• Ability to lead crews, delegate tasks, and communicate effectively under show conditions
• Familiarity with rigging practices and working at height (lift and fall protection certification preferred)
• Strong understanding of power distribution, load balancing, and electrical safety

• Calm under pressure with quick problem-solving and decision-making abilities
• Knowledge of OSHA, ANSI, and industry-specific safety standards

A2 Responsibilities

• etc,

Forklift Responsibilities

• Operated forklifts (sit-down, stand-up, pallet jack, or telehandler) to safely load, unload, and transport materials across job sites or warehouses.
• Moved heavy equipment, pallets, staging, and production gear as part of event load-ins, construction projects, or inventory handling.
• Conducted daily safety inspections and basic maintenance on forklifts to ensure operational readiness.
• Followed site-specific layouts, floor plans, or load schedules to position materials efficiently and securely.
• Communicated with team leads, riggers, and supervisors to coordinate tight-load maneuvering and clearances.
• Maintained a clean and organized work area while complying with all safety regulations and traffic rules on site.
• Assisted in loading trucks, securing cargo, and documenting materials movement as required.

Knowledge and Skills:

• Certified forklift operator (MSC Safety Solutions, OSHA)
• Experience with sit-down, stand-up, reach trucks, and pallet jacks
• Strong spatial awareness and attention to load stability
• Familiar with warehouse, venue, and event production logistics
• Knowledge of material weight limits, stacking procedures, and hazard recognition
• Ability to follow verbal and written instructions precisely
• Safety-focused, punctual, and able to work in fast-paced environments

General Corporate AV Responsibilities (GAV)

• Set up, operated, and maintained audio, video, and lighting equipment for live events, conferences, and large-scale productions.
• Etc,

• General AV Live Production Responsibilities
• Lyle Lovett Private Event
• Staging, Lighting, Audio

General AV Responsibilities

• Set up, operated, and maintained audio, video, and lighting equipment for live events, conferences, and large-scale productions.
• Etc,

V2 Responsibilities

• Assisted the lead video technician (V1) in setting up, configuring, and operating video systems for live events including corporate presentations, concerts, conferences, and trade shows.
• Etc,

A2 Responsibilities

• Supported A1 and audio department with setup, testing, and operation of microphones, monitors, playback devices, and cabling for corporate events and live performances.
• Etc,

General AV Responsibilities

General AV and Stagehand responsibilities

General Music Live Production AV

GAV Responsibilities

Conference Room Technician

• Set up, operated, and maintained audio-visual systems for breakout rooms during conferences, seminars, training sessions, and multi-room corporate events.
• Installed projectors, screens, microphones, speakers, and small-format mixing consoles or DSPs according to event specs and room layouts.
• Ensured seamless integration of presentation materials, video playback, remote call-ins (Zoom/Teams), and presenter devices.
• Conducted sound checks, adjusted levels, and handled live audio for speech reinforcement, panel discussions, and Q&A sessions.
• Provided on-site technical support for presenters and attendees, resolving last-minute issues with laptops, adapters, video formats, and audio connections.
• Coordinated with the general session team and event leads to ensure breakout room schedules were aligned and changes were communicated.
• Performed daily equipment checks and assisted with load-in/load-out, gear inventory, and room resets.

Skills:

• Proficient in setting up and operating portable AV gear including projectors, flat panels, wireless mics, and powered speakers
• Familiarity with signal flow for both audio and video, including HDMI, VGA, USB-C, and analog audio
• Strong troubleshooting abilities under tight time constraints
• Clear, professional communication with clients, presenters, and team members
• Comfortable with basic audio mixing and gain structure
• Knowledge of common presentation software (PowerPoint, Keynote) and video conferencing platforms
• Detail-oriented and able to manage multiple rooms or rotating schedules during multi-day events
• Customer service mindset with a calm, solution-focused approach

General Corporate and Music Live Production AV Responsibilities

• Juneteenth Festival
• Local Music events
• Corporate AV Labor force
• Broadmoor, Gaylord Rockies

L2 Responsibilities

A2 Responsibilities

Carpenter Responsibilities

• Constructed, assembled, and maintained stage sets, props, and scenic elements based on designers’ plans and technical drawings.
• Built and installed flats, platforms, ramps, stairs, and custom scenic pieces for theatrical productions.
• Executed rapid set changes during performances, ensuring smooth transitions between scenes.
• Collaborated closely with scenic designers, stage managers, and production crews to meet artistic and safety standards.
• Performed repairs and adjustments to sets and props throughout production runs.
• Operated hand tools, power tools, and workshop machinery safely and efficiently.
• Assisted in loading and unloading materials and equipment during load-in and load-out processes.
• Followed all safety protocols and maintained a clean and organized workspace.

Knowledge and Skills:

• Strong carpentry skills including framing, joinery, and finishing techniques
• Ability to read and interpret technical drawings, blueprints, and scenic plots
• Experience with stage rigging and working at heights safely
• Familiarity with different materials: wood, metal, plastics, and composites
• Skilled in using power tools such as saws, drills, sanders, and nail guns
• Understanding of theatrical production schedules and fast-paced environments
• Knowledge of workplace safety standards (OSHA) and venue-specific rules
• Good communication and teamwork skills within a production team

• Set Carpenter for Althea Play
• Constructed scenic elements, stage platforms, flats, walls, and props based on technical drawings, design renderings, and construction plans for theatrical productions.
• Operated woodworking tools and machinery (table saws, chop saws, routers, sanders) to fabricate high-quality scenic units within production deadlines.
• Interpreted shop drawings and communicated with technical directors and scenic designers to ensure accurate builds and artistic intent.
• Collaborated with paint, rigging, and electrics departments to integrate scenic, lighting, and special effects elements.
• Participated in load-in and strike of scenic pieces at the performance venue, assisting in installation, alignment, and on-site modifications.
• Maintained clean, organized, and safe workspaces in accordance with shop safety protocols and best practices.
• Repaired and reinforced scenic units as needed during rehearsal and performance runs.

Skills:

• Strong carpentry and woodworking skills specific to scenic construction
• Ability to read and build from technical drawings and CAD models
• Proficient with standard hand and power tools used in theatrical set building
• Familiarity with theatrical rigging principles and materials (optional but helpful)
• Experience with scenic automation or moving elements (if applicable)
• Strong teamwork, problem-solving, and time management under production deadlines
• Understanding of stage safety procedures and material handling
• Comfortable working independently or under supervision in a shop or venue environment

• Planned, coordinated, and managed live DJ shows and music events at local venues, ensuring smooth execution from setup to teardown.
• Work with team to plan promote and organize and rent equipment and delegate financing and pay for staffing and performer, Accounting.
• Social Media Management & Promotion- Photography, editing, graphic design
• Ticketing and Front door/ Security Management
• AV Technician Music Production Set up; Lighting, Projections, Audio, Power/ Electrics
• Load in/ Load out
• V1 operator, apc140, Resolume
• A1 Operator
• A2 operation with local sound companies- High Fidelity Systems. Liaised with venue management, local audio companies, and vendors to secure sound equipment, staging, and technical support.
• DJ Performer- CDJ
• Wildflower/ Polywave.io hands on sessions and classes in Conway Sound Recording Studio
• Outdoor / Indoor Production
• Planned, coordinated, and managed live DJ shows and music events at local venues, ensuring smooth execution from setup to teardown.
• Oversaw event logistics including load-in/out schedules, stage setups, sound checks, and artist hospitality.
• Managed budgets, negotiated contracts, and ensured compliance with venue regulations and safety standards.
• Coordinated production teams including sound engineers, lighting technicians, and stagehands to deliver high-quality live experiences.
• Collaborated with DJs, artists, and collective members to align event production with creative vision and audience expectations.
• Implemented marketing and promotional strategies in partnership with collective members to maximize event attendance.
• Responded quickly to technical or operational issues during events to minimize disruptions.
• Maintained post-event reports and evaluations to improve future event planning.

Knowledge and Skills:

• Strong understanding of live sound systems, DJ equipment, and staging requirements
• Experience coordinating with venues, local vendors, and technical crews
• Budget management and contract negotiation skills
• Excellent organizational and multitasking abilities under pressure
• Knowledge of health and safety regulations for live events
• Familiarity with event marketing and audience engagement strategies
• Ability to build and maintain strong relationships with artists, vendors, and venue staff
• Problem-solving mindset and calmness during live event challenges
• Leadership skills to manage diverse production teams effectively

Conference Room Technician

• Monitored and repaired audio, video, control systems and video conferencing equipment.
• Adhered to safety protocols while installing projectors, displays and speakers.
• Commended by management for continuous punctuality and superior performance.
• Set up, operated, and maintained audio-visual systems for breakout rooms during conferences, seminars, training sessions, and multi-room corporate events.
• Installed projectors, screens, microphones, speakers, and small-format mixing consoles or DSPs according to event specs and room layouts.
• Ensured seamless integration of presentation materials, video playback, remote call-ins (Zoom/Teams), and presenter devices.
• Conducted sound checks, adjusted levels, and handled live audio for speech reinforcement, panel discussions, and Q&A sessions.
• Provided on-site technical support for presenters and attendees, resolving last-minute issues with laptops, adapters, video formats, and audio connections.
• Coordinated with the general session team and event leads to ensure breakout room schedules were aligned and changes were communicated.
• Performed daily equipment checks and assisted with load-in/load-out, gear inventory, and room resets.

Skills:

• Proficient in setting up and operating portable AV gear including projectors, flat panels, wireless mics, and powered speakers
• Familiarity with signal flow for both audio and video, including HDMI, VGA, USB-C, and analog audio
• Strong troubleshooting abilities under tight time constraints
• Clear, professional communication with clients, presenters, and team members
• Comfortable with basic audio mixing and gain structure
• Knowledge of common presentation software (PowerPoint, Keynote) and video conferencing platforms
• Detail-oriented and able to manage multiple rooms or rotating schedules during multi-day events
• Customer service mindset with a calm, solution-focused approach
• Read and evaluated diagrams to determine specifications.
• Led crew of audio-video installation team members.
• Correctly read and interpreted audio-visual diagrams.
• Supported live events with well-controlled lights, sound and video streaming.
• Collaborated with directors and camera crews to lay out filming sequences and equipment requirements.
• Diagnosed and resolved problems with AV equipment and media management systems.
• Obtained, set up and loaded videotapes for scheduled broadcasts.
• Met budget targets with optimal formats, content choices and mediums to meet objectives.
• Controlled video input for live conferences or performances and pre-recorded productions.
• Set-up, controlled and operated audio for live conferences and performances
• Set up projectors, laptops and microphones for live presentations.
• Programmed and operated audio-visual equipment to support seamless live events.
• Monitored and adjusted sound and lighting levels to optimize live event performance.
• Pulled and terminated variety of cables.
• Interfaced with customers to explain operation and instill confidence in installed systems.
• Tested and calibrated audio and visual equipment to verify proper operation.

• Secured safety equipment and always used gear according to requirements.
• Rigged cables and pipes in configurations to support loads and maintain crew safety.
• Rigged for heavy lifts according to blueprint requirements.
• Consistently assumed additional
• responsibilities and worked extended hours to meet project deadlines.
• Determined correct rigging requirements for equipment based on job specifications and environmental conditions.
• Installed, operated, and maintained rigging systems for theatrical productions, ensuring the safe movement and suspension of scenic elements, lighting equipment, and soft goods.
• Worked with fly systems (counterweight and motorized) to rig backdrops, set pieces, lighting battens, and special effects.
• Interpreted rigging plots, technical drawings, and production plans to ensure correct placement and secure load handling.
• Collaborated with stage management, technical direction, electrics, and scenic departments during load-ins, tech rehearsals, and performances.
• Conducted routine inspections of rigging hardware (shackles, wire rope, pulleys, grids, and hoists) to ensure safety and functionality.
• Installed overhead points, bridles, and truss for special effects, automation systems, or flown scenery as required.
• Participated in strikes and changeovers, maintaining speed, safety, and attention to venue preservation.
• Followed all safety protocols and theatrical rigging standards (ETCP, OSHA) while working at height or near performers.

Skills:

• Proficient in counterweight fly systems, hemp systems, and motorized rigging
• Skilled in tying knots, running lines, and securing loads for both static and dynamic elements
• Strong understanding of load calculations, weight distribution, and rigging math
• Familiarity with truss, chain motors, and fall protection equipment
• Comfortable working at height on catwalks, grids, and ladders
• Ability to read and interpret rigging plots and technical diagrams
• Strong communication and coordination skills within a fast-paced production team
• Commitment to safety, precision, and adherence to industry rigging standards

GAV Responsibilities

• Constructed, assembled, and maintained stage sets, props, and scenic elements based on designers’ plans and technical drawings.
• Built and installed flats, platforms, ramps, stairs, and custom scenic pieces for theatrical productions.
• Executed rapid set changes during performances, ensuring smooth transitions between scenes.
• Collaborated closely with scenic designers, stage managers, and production crews to meet artistic and safety standards.
• Performed repairs and adjustments to sets and props throughout production runs.
• Operated hand tools, power tools, and workshop machinery safely and efficiently.
• Assisted in loading and unloading materials and equipment during load-in and load-out processes.
• Followed all safety protocols and maintained a clean and organized workspace.

Knowledge and Skills:

• Strong carpentry skills including framing, joinery, and finishing techniques
• Ability to read and interpret technical drawings, blueprints, and scenic plots
• Experience with stage rigging and working at heights safely
• Familiarity with different materials: wood, metal, plastics, and composites
• Skilled in using power tools such as saws, drills, sanders, and nail guns
• Understanding of theatrical production schedules and fast-paced environments
• Knowledge of workplace safety standards (OSHA) and venue-specific rules
• Good communication and teamwork skills within a production team

• GAV
• Conference Room Tech Responsibilities
• A2
• V2
• L2
• Camera Operator

• Installed overhead rigging systems for concerts, festivals, and special events at Red Rocks Amphitheatre, ensuring safe suspension of truss, lighting, audio, and video equipment.
• Coordinated with touring crews, production managers, and house staff to execute complex rigging plots tailored to the unique architecture and load points of the venue.
• Climbed and worked at height on roofs, towers, and steel structures to build down-rig and up-rig points using motors, bridles, and fall protection systems.
• Used dynamic and static rigging techniques to secure gear in high-wind and variable weather conditions, maintaining structural safety and show integrity.
• Calculated load distribution and point weights to meet engineering specs and prevent overloading structural elements.
• Operated chain motors and assisted with motor control systems for raising/lowering truss and flown equipment.
• Participated in daily rigging calls including load-ins, show support, and strikes, while maintaining strict adherence to safety protocols and timeline management.
• Inspected, maintained, and logged hardware including shackles, steel, spansets, and fall protection systems in accordance with OSHA and industry standards.

Skills:

• Advanced understanding of arena and outdoor rigging practices
• Proficient in bridling, load calculations, and use of chain motors (1-ton, 2-ton, etc.)
• Comfortable working at height with certified fall arrest systems
• Skilled in reading rigging plots and adapting to unique structural environments
• Experienced with high-capacity truss systems and tensioned cable rigging
• Strong communication with production teams, touring personnel, and venue staff
• Knowledge of weather-specific rigging challenges (wind, rain, sun exposure)
• Committed to safety, efficiency, and clear coordination under pressure

• Installed, operated, and maintained motorized down rigging systems (chain hoists, winches, and wire rope) for suspending lighting, audio, scenic elements, and video equipment safely above stages and exhibit floors.
• Coordinated with rigging leads, lighting designers, and production managers to position gear precisely according to show requirements and venue specifications.
• Conducted thorough pre-show inspections and load tests on rigging equipment to ensure compliance with safety standards and weight limits.
• Assisted in load-in and load-out of heavy rigging components and ensured secure attachment points for overhead elements.
• Executed safe and smooth movement of overhead trusses and equipment during live events or scene changes, minimizing noise and vibrations.
• Monitored rigging systems during performances to identify and resolve issues quickly, ensuring uninterrupted show flow.
• Adhered strictly to OSHA, union regulations (e.g., IATSE), and venue-specific safety protocols.
• Trained and supported junior riggers and stagehands in rigging safety and equipment operation.
• Operated High Lift Aerial/Scissor and Boom Equipment

Knowledge and Skills:

• Proficient in operating motorized chain hoists, winches, and manual rigging gear
• Strong knowledge of rigging hardware including shackles, slings, clamps, and wire rope
• Proficient in safe operation of Aerial lift equipment at heights
• Understanding of load calculations, weight distribution, and safety factors
• Familiarity with stage and trade show environments and scheduling demands
• Ability to read rigging plots and technical drawings
• Excellent teamwork and communication in high-pressure environments
• Commitment to strict safety standards and protocols
• Physically fit with capability to work at heights and in confined spaces

Rigger

Carpenter

Electrician E2

L2

Spotlight Operator

• GAV Responsibilities

• Monitored and maintained electronic prop devices in exhibit installs such as fogger machines, strobe/ uplighting lighting, motion activated automation props/traps, televisions
• Prop construction from material and carpentry builds for art exhibit installations
• Improv Acting with costumes and character props
• Constructed and maintained sets, walls, props, and structural elements for immersive haunted house environments.
• Built custom scenic elements including trap doors, secret passages, movable walls, and staging platforms.
• Installed safety features such as railings, non-slip surfaces, and emergency access points in compliance with venue regulations.
• Worked with scenic designers and production leads to realize creative concepts while ensuring durability and safety.
• Managed load-in and load-out of heavy set pieces, coordinating with rigging and AV teams.
• Performed regular inspections and repairs to address wear, damage, or safety concerns during the run.
• Used power tools, hand tools, and welding equipment as required for fabrication and assembly.

Knowledge and Skills:

• Carpentry (framing, finishing, joinery) and prop construction
• Knowledge of safe use of power tools and workshop machinery
• Ability to read and interpret technical drawings and blueprints
• Set construction and rapid repair in high-traffic environments
• Familiarity with OSHA and venue safety regulations
• Effective teamwork in fast-paced production schedules
• Experience with scenic paint and finishes (optional)

• Assisted in the setup, maintenance, and breakdown of festival stages, backline, audio, lighting, video, and rigging systems across multiple performance areas.
• Loaded and unloaded trucks with staging, production gear, and band equipment in fast-paced and high-pressure environments.
• Built staging platforms, barricades, scaffolding, and truss structures under the direction of crew leads and technical supervisors.
• Helped position and secure lighting fixtures, audio stacks, video walls, and power distribution systems.
• Supported artist changeovers by moving instruments, set pieces, risers, and other gear according to stage plots and run-of-show.
• Maintained clear communication with stage managers, audio and lighting departments, and touring crews for efficient transitions and safety compliance.
• Worked long hours outdoors in varying weather conditions while maintaining stamina, safety, and attention to detail.
• Followed all safety protocols, used PPE, and adhered to venue-specific and production-wide rules.

Skills:

• Strong physical endurance and ability to lift and move heavy gear (50–75+ lbs)
• Basic knowledge of staging hardware, tools, and production equipment
• Familiarity with cabling (power, audio, video) and labeling systems
• Ability to follow direction and adapt quickly during live productions
• Experience working in team environments with strict timelines and evolving needs
• Understanding of backstage etiquette and artist handling protocols
• Comfortable working in high-volume, high-energy settings with crowds and noise
• Awareness of festival safety, including weather contingency procedures and crowd safety practices

• Music Live Production GAV
• Truck load-in, load-out

• Used forklift to lift pallets and heavy items into trucks
• Used forklift for stacking and u stacking road cases and truss.
• Move shows in and out in a timely manner
• Loaded and unloaded staging, lighting, audio, video, and scenic equipment for concerts, corporate events, and trade shows.
• Packed trucks efficiently using pre-planned diagrams (truck packs), optimizing space and ensuring gear safety in transit.
• Handled flight cases, road cases, trussing, cable trunks, and fragile equipment with care and speed.
• Coordinated with department heads (audio, lighting, rigging, scenic) to stage gear in order of deployment for efficient setups and strikes.
• Maintained gear organization during chaotic load-outs to ensure accurate repacking and damage prevention.
• Used dollies, lifts, ramps, and straps to safely move heavy equipment over varied terrain (loading docks, venues, outdoor sites).
• Adhered to event schedules and worked under tight timeframes, often in early morning or late-night shifts.
• Followed site safety protocols including proper lifting techniques and PPE usage.
• Reviewed shipping orders for accurate fulfillment.

• Worked with other crew members on the installation and maintenance of all general elements of live production, including audio, video, lighting, stage installation, etc.
• Split Shift
• Loaded in and loaded out equipment custom to tour, 1, 2 , 3 day band events, personally working over 75-100+ red rocks events/bands per year. Completed all projects in a timely manner.
• Split Shift, long hours on feet in outside conditions
• Proudly assisted with stage builds of renown bands, DJ's and performers such as Nine Inch Nails, South Park 25th Anniversary Concert featuring Dean Wean and Les Claypool, Billy Strings, Widespread Panic, String Cheese Incident, Deadmau5, Of The Trees, Lynard Skynard, Jelly Roll, Tech N9ne, Zach Bryan, Stevie Nicks, as well as the Colorado Symphony Sounds of Harry Potter & Star Wars, and so many more!
• Assisted lighting with truss/lighting builds and hanging of lighting/lasers as well as cable dmx and powercon to desired universes and circuits in accordance to performers tour Lighting Designers schematics, and assisted with setting IP addresses for Artnet and sACN lighting console patching and operation
• Strong understanding of signal flow
• Assisted audio crew with install and dismantle of large scale PA system including installation of line array speaker systems, subs, stage monitors independent to each individual production crew.
• XLR and power cabled to audio systems and audio snake ran to FOH audio consoles
• Assisted Video technicians to safely install L.E.D. video wall systems as plotted in staging schematics independent to individual tours stage design
• Assisted City of Denver with Colorado Symphony events with the orchestra as well as collaboration projects with the Colorado Symphony and Red Rocks performers.
• Communicated and worked closely with the Production Manager to ensure that all requirements were met.
• Closely worked with many different production companies such as Brown Note Productions often
• Worked Directly with Guitar , and Music Techs as Backline assist. Safely move and set up musicians instruments; drums, amps, synths, pianos, etc
• Adhered to safety protocols while installing projectors, displays and speakers, LED, Carpentry,Lights, Lasers, etc
• Monitored and repaired audio, video, lighting control systems
• Performed tasks by using proper tools, materials, methods and safe practices in accordance with best industry practices.
• Provided troubleshooting techniques in integrating professional audio/video systems.
• Interpreted technical data from drawings, blueprints, schematics..
• Pulled and terminated variety of cables as an E2 from soca nl-20, nl30
• Read and evaluated diagrams to determine specifications.
• correctly read and interpreted audio-visual diagrams.
• Pulled low-voltage cabling and fiber optic according to industry practices.
• Proudly assisted with stage builds of renown bands, DJ's and performers such as Nine Inch Nails, South Park 25th Anniversary Concert featuring Dean Wean and Les Claypool, Billy Strings, Widespread Panic, String Cheese Incident, Deadmau5, Of The Trees, Lynard Skynard, Jelly Roll, Tech N9ne, Zach Bryan, Stevie Nicks, as well as the Colorado Symphony Sounds of Harry Potter & Star Wars, and so many more!

• Built large booths for exhibition company’s tendering to clients in order for client to market products
• Constructed large structures using interlock systems from interpreting materials and blueprints
• Performed installation, alignment and balancing of equipment.
• Confirmed installations and implementations met project requirements by closely reviewing and studying blueprints.
• Assisted workers by organizing supplies, passing tools and managing equipment.
• Adhered to quality assurance, performance and compliance standards.
• Assembled and dismantled custom and modular trade show booths according to floor plans, brand specifications, and event timelines.
• Installed structural components, signage, lighting, AV equipment, and furniture to prepare booths for show-ready presentation.
• Worked from technical drawings and onsite direction to ensure accurate and efficient builds.
• Handled packing, labeling, and storage of booth components during load-out to prevent damage and streamline future setups.
• Coordinated with event managers, exhibitors, and union crews to maintain schedules and adhere to venue policies.
• Operated basic tools and equipment including ladders, drills, and lifts in compliance with safety standards.
• Ensured all install and dismantle work was performed to high visual and structural standards within tight deadlines.
  

Skills:

• Experience reading floor plans and booth schematics
• Familiarity with pipe and drape, truss systems, and modular booth materials
• Strong teamwork and communication in fast-paced environments
• Ability to lift and maneuver heavy objects safely
• Knowledge of venue rules, safety protocols, and union guidelines
• Efficiency under time constraints with attention to detail
  

• Performed functions on a commercial film set as an E2 electrician to assist filming gaffer with visionary and technical needs.
• Maintained and set up equipment
• Long hours in drastic weather conditions, snow
• Constructed film systems, tripods, camera vehicle rigs, camera sled
• Utilized equipment in alignment with established safety protocols, electric code and Occupational Health and Safety regulations.
• Evaluated existing electrical systems for maintenance, repair and update requirements.
• Adhered to safety protocols, OSHA standards and building codes in installation of systems, operation of equipment and handling of materials.
• Performed detailed inspection and repairs on splicers, cables and Type equipment.
• Performed troubleshooting to determine issues and appropriate action to complete tasks and provide quality installations.
• Troubleshooted systems and repaired equipment, ensuring compliance with all established guidelines.
• Supported the Director of Photography and camera team with rigging and stabilizing camera setups for vehicle shots, tracking scenes, and specialty angles.
• Assisted in assembling and adjusting grip gear including C-stands, flags, diffusers, and camera support systems.
• Worked directly with the gaffer to set up lighting for interior and exterior vehicle shots, adjusting for natural conditions and cinematic effect.
• Ran cable and power distribution to lighting fixtures, HMIs, LED panels, and practicals on location.
• Helped build and strike lighting setups with precision and speed to maintain production timelines.
• Ensured safe and secure rigging on rough terrain and moving vehicle setups under tight scheduling conditions.
• Collaborated with multiple departments to adapt gear and setups to weather, terrain, and evolving creative needs.

Knowledge and Skills:

• Grip gear: C-stands, flags, sandbags, apple boxes, arms, clamps, dollies
• Electric: cabling, distro boxes, dimmers, HMIs, LEDs (Aputure, ARRI, etc.)
• Camera rigging: suction mounts, speed rail, car mounts, stabilization supports
• Understanding of set etiquette and on-set safety procedures
• Ability to work quickly, quietly, and flexibly on location shoots
• Effective communication with Gaffer, DP, and Camera Ops
• Basic understanding of lighting ratios, color temperature, and light shaping

• Hard-working and results-driven
• experience in installing and operating all elements of live production, including audio, lighting, video, and stage installation. Possess a highly professional attitude,
• excellent technological expertise and manual dexterity, well-developed time
• management skills, and significant ability to work under pressure.
• Worked with other crew members on the installation and maintenance of all general elements of live production, including audio, video, lighting, stage installation, etc.
• Load and unload trucks with audio, lighting, video, and staging equipment for concerts, festivals, and corporate events
• Assemble and dismantle stages, truss systems, risers, scenic elements, and production gear
• Assist lighting, audio, video, and rigging departments during setup and strike
• Run cables, power, and signal lines per crew leads or department heads’ direction
• Set up and strike backline gear, mic stands, instruments, and DJ equipment
• Maintain clean, organized, and safe work areas in high-traffic environments
• Follow all safety protocols, including PPE and lockout/tagout procedures
• Work efficiently under pressure and on tight timelines during live show calls
• Support riggers and department heads with fly systems and overhead installs
• Communicate effectively with crew, production leads, and performers
• Operate lifts, dollies, and carts to move gear safely and efficiently
• Adapt quickly to changing show needs and perform duties across departments as needed

• Installed, tested, and maintained low voltage cabling systems including Cat5e, Cat6, and fiber optic networks.
• Terminated and labeled network jacks, patch panels, and telecommunications closets following industry standards.
• Interpreted blueprints, schematics, and technical drawings for structured cabling and device layout.
• Mounted and configured communication hardware including routers, switches, access points, and VoIP systems.
• Performed cable pulling, dressing, routing, and pathway setup through ceilings, walls, and conduit systems.
• Conducted continuity tests, toning, and signal verification using Fluke and other certification tools.
• Provided field support for troubleshooting network connectivity, voice/data transmission, and device issues.
• Maintained clean and organized workspaces to ensure job site safety and minimize disruption to client operations.
• Collaborated with electricians, IT personnel, and project managers to ensure timely completion of installs.
• Adhered to NEC, ANSI/TIA/EIA, and company-specific low voltage standards and safety procedures.

Knowledge and Skills:

• Structured cabling (Cat5e, Cat6, Cat6a, coaxial, fiber)
• Voice and data system installations (VoIP, PBX)
• Network hardware configuration and support
• Cable testing, certification, and documentation
• Ability to read and interpret technical blueprints
• Proficient with hand and power tools (fish tape, drills, cable testers, etc.)
• Understanding of telecommunications pathways and spaces (IDF/MDF buildouts)
• Familiarity with BICSI and NEC standards
• Excellent troubleshooting and customer service skills
• Comfortable working at heights, in confined spaces, and on construction sites

• Loaded, unloaded, and moved material to and from storage and production areas.
• Production/Changeover house crew
• Assisted with production of arena stage/floor build
• Constructed ice rink for Scorpions Minor League Hockey events
• Built Basketball court or court interfaces for volleyball and wrestling tournaments
• As a Carpenter Helped with construction of Circus Du Solei
• Spotlight Operator
• Build Decking/Staging
• Constructed outdoor tent builds

• Tested continuity of circuits using test equipment to verify compatibility and safety of systems following installation, replacement, or repair.
• Pulled wire through conduits and through holes in walls and floors.
• Checked and performed electrical wiring through conduits and holes in walls and floors.
• Helped complete system installations, digging trenches, and breaking up concrete.
• Drove electrical work van

Heating and Air Conditioning (HVAC)

• Removal and installation of furnace/ and or air conditioning unit.
• Installation of mini splits
• Diagnosis and repair for furnace
• Minor plumbing/ gas lines, water heater install and removal

Service Change and Install

• Full Breaker Panel Replacement
• Adding more power
• Running more power
• Breaker replacements
• Hot Tub installation
• Wire Roughing entire house
• Light fixture/ can installation/ fan installation
• Chandelier install
• GFI Install
• 3 way switch installs- outlets, light switches, dimmers
• Surveillance installation
• Lower voltage Experience

Commercial

• Home Depot L.E.D. lighting project

Installation of L.E.D. lighting displays in 8 different Home Depot stores.

180-250 lights per store

• Assisted licensed electricians in installing, maintaining, and repairing electrical systems in residential and commercial buildings.

• Conducted basic troubleshooting and testing of electrical components using multimeters and other diagnostic tools.
• Assisted with electrical panel upgrades, grounding systems, and safety inspections following local codes and regulations.

Knowledge and Skills:

• Basic knowledge of residential and commercial electrical systems and components
• Ability to read blueprints, wiring diagrams, and technical manuals
• Familiarity with electrical safety standards and building codes
• Experience using hand and power tools related to electrical work
• Strong problem-solving skills and attention to detail
• Good physical stamina and ability to work in confined spaces or at heights
• Willingness to learn and adapt in a fast-paced construction environment
• Effective communication and teamwork skills

• Interpreted job site supervisor's orders and technical documentation to complete accurate work.
• Limbed and pruned variety of tree species.
• Operated large dump truck and Wood chipper machines to safely move tree materials.
• Operated power tools like chainsaw to cut down material
• Climbed trees using a rope and harness, and lowered in top components of tree primarily logs from tree trunk to ground using pully systems.
• Climbed trees using harnesses and ropes or operated aerial lift equipment to safely trim, shape, and remove tree limbs and entire trees.
• Used chainsaws, handsaws, pole saws, and pruners to remove hazardous or obstructive branches near power lines, roads, and structures.
• Rigged and lowered limbs safely using ropes and pulleys to prevent damage to property or injury to crew members.
• Conducted site assessments for tree health, structural risk, and trimming or removal strategy.
• Cleared brush, loaded limbs, and operated wood chippers and stump grinders as part of job site cleanup and efficiency.
• Supported climbers by managing rigging lines, spotting hazards, and maintaining clear communication during cuts.
• Maintained tools, performed equipment checks, and adhered to strict safety standards including PPE use and drop zone awareness.
• Ensured proper disposal or chipping of wood debris while maintaining a clean and safe job site.
  

Knowledge and Skills:

• Tree climbing techniques and aerial lift operation
  Chainsaw and power tool safety and maintenance
• Limb rigging, drop zone control, and hazard mitigation
• Brush clearing, chipping, and debris management
• Rope handling, knots, and ground crew coordination
• Knowledge of tree types, growth patterns, and disease signs
• Strong physical endurance, situational awareness, and teamwork