Hugo F Florez Sanchez
Houston,TX
Summary
Goal oriented industrial electrician, with solid knowledge of circuit management and power distribution. More than 5 years of experience in the field of industrial electrician and control and instrumentation in the industrial area. Organized, punctual worker, with good mechanical reasoning and skills in the interpretation of blueprints, schematics, and installation of electrical devices and components.
Overview
18
18
years of professional experience
Work History
Industrial Electrician, Control and Instrument
AFIMAC
Troy, IL
11.2024 - 11.2024
- Troubleshooting for VFD, PLC, motors, panels, breakers, MCC, generators,conveyors, Proxys with IP and without, gateway,
- Install and maintenance electrical equipment and control devices.
- Installed and maintained electrical equipment in accordance with industrystandards.
- Installed and maintained electrical equipment in accordance with industrystandards.
- Installed and maintained electrical equipment in accordance with industrystandards.
- Maintained records of all work performed including parts used, time spent oneach task and any other relevant information.
- Maintained records of all work performed including parts used, time spent oneach task and any other relevant information.
- Maintained records of all work performed including parts used, time spent oneach task and any other relevant information.
- Troubleshooting fanuc robots. welding robots it weld cable trays for electrician industry
Alfred Conhagen and Sidewindes llc
Houston, TX
09.2024 - 10.2024
- Rewire motor for turbine of brand General Electric
- Connect instruments for measure temperature for coils and bearing
- Wire for voltage 15k that feeding the motor
- Run cables for control
- Cable termination for control, power and instrumentations
- Testing each panel, junction boxes that working properly
- Set up new PLC and vfd for each process in this motor
- General maintenance for control, electricity and instruments
Industrial Electrician and control Technician
AFIMAC, MOLSON COORS BREWING
Fort Worth, TX
02.2024 - 06.2024
- Troubleshooting for VFD, PLC, motors, panels, breakers, MCC, generators, conveyors, Proxys with IP and without, gateway
- Install and maintenance electrical equipment and control devices
- Installed and maintained electrical equipment in accordance with industry standards
- Maintained records of all work performed including parts used, time spent on each task and any other relevant information
Industrial Electrician
Zachry Group
Omaha, NE
08.2022 - 02.2024
- Install new equipment for manufacturing companies
- Set up MCC in accordance with the following guidelines and regulations
- Interpreted diagrams and drawings to install conduit runs for new construction projects
- Read schematic
- Read blueprint
- Cable terminations
- Assemble cable trays
- Tested electrical systems and circuit continuity using ohmmeters, multimeters
- Run conduits
- Run and pull wires
- Testing electrical equipment, MCC before being energized
- Temporary powers lines
Industrial Electrician
Zachry Group
Omaha, NE
01.2021 - 02.2022
- Install new equipment for manufacturing companies
- Set up MCC in accordance with the following guidelines and regulations
- Interpreted diagrams and drawings to install conduit runs for new construction projects
- Read schematic
- Read blueprint
- Cable terminations
- Assemble cable trays
- Tested electrical systems and circuit continuity using ohmmeters, multimeters
- Run conduits
- Run and pull wires
- Testing electrical equipment, MCC before being energized
- Temporary powers lines
Industrial Electrical
STI Group
Channelview, TX
12.2019 - 01.2021
- Installed and maintained electrical equipment in accordance with industry standards
- Read blueprints and schematics to determine the correct wiring of industrial machinery
- Interpreted diagrams and drawings to install conduit runs for new construction projects
- Utilized a variety of hand tools such as drills, saws, wire strippers and crimpers to complete repairs or installations
- Repaired faulty wiring in existing buildings according to local codes and regulations
- Replaced defective parts such as fuses or circuit breakers when necessary
- Followed NEC and local building regulations
- Pull wire
- Reviewed blueprints to determine electrical component and wiring locations
- Tested electrical systems and circuit continuity using ohmmeters, multimeters
- Installed conduits or pipes following the blueprints
Carpenter
Cajun Industries LLC.
Port Lavaca, Texas
05.2019 - 12.2019
- Measured, cut and shaped wood materials to specifications using hand tools, such as saws and chisels
- Repaired or replaced damaged structures or components
- Constructed forms for concrete pours in accordance with building codes
- Read blueprints, schematics and drawings to determine layout requirements
- Cut countertops from laminated material following template measurements
- Operated power tools safely when performing carpentry tasks such as drilling holes into lumber pieces
- Performed various carpentry duties, including both rough and finish carpentry
- Shaped or cut materials to proper measurements using hand tools, machines or power saws
- Used band, circular and compound miter saws
Millwright
Ecopetrol
Bogota, Colombia
02.2017 - 02.2018
- Inspected and tested all machinery components to ensure proper functionality
- Replaced faulty parts such as bearings, gears, and shafts in a timely manner
- Installed new equipment according to manufacturer specifications
- Measured and cut structural steel components to construct framework for conveyor systems
- Assembled industrial machines using appropriate tools and techniques
- Aligned motors, pumps, gearboxes, conveyors and other mechanical systems
- Removed old equipment from facilities in an efficient manner
- Lubricated moving parts of machinery at regular intervals to prevent breakdowns
- Used and maintained shop equipment to prevent downtime and reduce safety hazards
- Read diagrams and schematic drawings to determine work procedures
Warrant Officer
Military forces Colombia
Colombia
09.2006 - 02.2017
- Developed and implemented new policies and procedures to ensure compliance with applicable regulations
- Conducted training courses for subordinate personnel on proper use of weapons, equipment, and tactics
- Supervised the maintenance of all vehicles assigned to the unit
- Ensured compliance with military regulations and laws
- Assisted in the development of strategic plans for the organization
- Created and maintained an effective team environment through collaboration and communication
- Provided guidance to subordinates on how to improve their performance and develop new skills
- Conducted regular meetings with staff to discuss progress, challenges, and opportunities
- Developed strategies to improve productivity and efficiency among team members
- Identified areas of improvement within the team's processes and procedures
Education
Bachelor of Science - Logistics Administration
University Logistics School of Colombia
Bogotá, Colombia06.2025
Some College - Lockout/tagout Safety in The Workplace
360 Training School
Houston, TX03.2024
OSHA 10 - Construction Trades
OSHA
Houston, TX01.2024
Twic Card -
Twic Card
Houston, TX12.2023
Industrial Basic Plus Orientation -
Health And Safety Council
Pasadena, TX10.2023
Scaffold Safety And Use - Scaffold Use Training
Health And Safety Council
Pasadena, TX10.2023
Safety in Confined Space -
Health And Safety Council
Pasadena, TX10.2023
CERTIFICATION - Electrician License
TDLR
Austin, TX05-2019
SAP System User - Enterprise Resource Planning
ARMY COLOMBIA
BOGOTA02-2017
Associate of Applied Science - Human Resources Training
Military Academy Army Colombia
Nilo, Colombia03.2013
Associate of Applied Science - Mechanic Technician
Santo Tomás
Cali, Colombia07.2004
Skills
- Troubleshooting
- Knowledge NEC
- Lockout and Tagout Procedures
- Schematic Interpretation
- Cultural Awareness
- Friendly
- Positive Attitude
- Multitasking
- Critical Thinking
- Flexible and Adaptable Maintenance
- Waste Reduction
- Arc flash safety
- Industrial control systems
- National electrical code
- Electrical troubleshooting
- Motor control circuits
- Conduit bending
Timeline
Industrial Electrician, Control and Instrument
AFIMAC
11.2024 - 11.2024
Alfred Conhagen and Sidewindes llc
09.2024 - 10.2024
Industrial Electrician and control Technician
AFIMAC, MOLSON COORS BREWING
02.2024 - 06.2024
Industrial Electrician
Zachry Group
08.2022 - 02.2024
Industrial Electrician
Zachry Group
01.2021 - 02.2022
Industrial Electrical
STI Group
12.2019 - 01.2021
Carpenter
Cajun Industries LLC.
05.2019 - 12.2019
Millwright
Ecopetrol
02.2017 - 02.2018
Warrant Officer
Military forces Colombia
09.2006 - 02.2017
Bachelor of Science - Logistics Administration
University Logistics School of Colombia
Some College - Lockout/tagout Safety in The Workplace
360 Training School
OSHA 10 - Construction Trades
OSHA
Twic Card -
Twic Card
Industrial Basic Plus Orientation -
Health And Safety Council
Scaffold Safety And Use - Scaffold Use Training
Health And Safety Council
Safety in Confined Space -
Health And Safety Council
CERTIFICATION - Electrician License
TDLR
SAP System User - Enterprise Resource Planning
ARMY COLOMBIA
Associate of Applied Science - Human Resources Training
Military Academy Army Colombia
Associate of Applied Science - Mechanic Technician
Santo Tomás
Similar Profiles
CARLISHA CARYCARLISHA CARY
CNC Machine Operator at AFIMACCNC Machine Operator at AFIMAC
Linda JohnsonLinda Johnson
Chef Assistant at AFIMACChef Assistant at AFIMAC
Sophie BrevardSophie Brevard
Private Investigator at AFIMACPrivate Investigator at AFIMAC